598584

Makita BMR103B Manual

9
Zoom out
Zoom in
Previous page
1/124
Next page
9
FM stereo (auto)/mono
If the FM radio station being listened to has a weak signal
some hiss may be audible. It is possible to reduce this
hiss by forcing the radio to play the station in mono rather
than stereo.
1. Press the Source button as needed to select the
FM band and tune to the desired FM station as
previously stated.
2. Press and hold Menu/Info button to enter the
menu setting.
3. Rotate the Tuning control until the FM Auto/mono
setting shows on the display. If the setting is Auto
press the Tuning control to switch to Mono mode to
reduce the hiss. Press the Tuning control to select the
option.
Recalling a preset in AM/FM mode
1. Press the Power button to switch on your radio.
2. Press the Source button to select AM or FM radio
mode.
3. Momentarily press the required Preset button
to cause your radio to tune to one of
the stations stored in the preset memory.
iPod docking
Your radio has an iPod docking facility which allows you
to play digital audio files and soundtracks held on your
iPod/iPhone directly.
Your radio uses the iPod Universal Dock adjustor
developed for use with iPods and iPhone. Recent models
of iPod/iPhone are supplied with Universal Dock Adapter
inserts which ensure correct alignment of the iPod/iPhone
with the electrical connector.
Important:
The radio does not support iPod 3rd generation (build
2003-2004). To avoid possible damage to your iPod,
do not use your iPod with the product without the
correct adapter fitted to the radio.
Note:
1) All the model listed in the following can be connected
to your radio, but not for iPod shuffle: (1) iPhone 4S
(2) iPhone 4 (3) iPhone 3GS (4) iPod touch 4G
(5) iPod touch 3G (6) iPod nano 6G (7) iPod nano 5G
(8) iPod classic
2) Models listed above have been certified by the
developer to meet Apple performance standards. The
models which are not listed above can also operate
with your BMR103; however, there is no certification
to meet Apple performance standards.
Charging your iPod/iPhone
1. Place the iPod/iPhone onto the Universal Dock
Adjuster into the iPod docking compartment. Press the
Power button to switch on your radio.
2. Press Source button until “iPod” shows on the
display. If you see (battery with thunder) on your iPod
screen, it indicates your radio is charging your iPod’s/
iPhone’s internal battery.
Note:
1) AM does not operate while charging your iPod/iPhone.
2) When the radio is plugged with AC adapter, your iPod/
iPhone can be charged regardless of power on/off of
the iPod/iPhone itself or the radio.
3) When the battery is used as power supply, your iPod/
iPhone can only be charged when the radio is power
on.
Navigating your iPod/iPhone
To navigate your iPod/iPhone menus to make selections
or to change settings, you should use your iPod/iPhone
controls. The radio controls can be used for Menu/Select,
Previous/Next, Fast Rewind/Fast Forward and Play/
Pause functions.
1. Use the Menu/Info button to navigate to higher
level menus on your iPod/iPhone.
2. Rotate the Tuning control as required to move up
or down a menu screen on your iPod/iPhone.
3. Press the Tuning control to select the highlighted
option on your screen menu.
Note:
If this item is a lower level menu item, you may then
navigate further by pressing the Tuning control.
Playing an audio file on your iPod/
iPhone
1. When you have found the desired item, press the
Tuning control on the radio to start the iPod
playing.
2. Adjust the volume to the required setting using the
Tuning control on your radio.
• To adjust the volume, you need to make sure the
word “iPod” on the screen is not flashing.
• Press the preset button (1-5) at any point If you
want to cease the word “iPod” from flashing.
3. To pause playback press the Play/Pause button
. To resume playback press the Play/Pause
button again.
4. iPods do not have a Stop button (they use the Pause
function). To play an alternative selection, use the
iPod menus to make the selection using the Play/
Pause button to stop playing the current
item if needed.
5. If it was previously playing, your iPod/iPhone will
switch on and continue playing from where it was
previously stopped.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita BMR103B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita BMR103B in the language / languages: All languages as an attachment in your email.

The manual is 3,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info