Manual Makita BML184 (page 5 of 24) (English, German, Dutch, French, Italian, Spanish)

600726

Zoom out

Zoom in

1/24

FUNCTIONAL DESCRIPTION

Charging

Charge the battery cartridge with the Makita charger

before use.

The following tables indicate the operating time on a

single charge.

Installing or removing battery cartridge

(Fig. 1)

• Always switch off the tool before insertion or removal of

the battery cartridge.

• To remove the battery cartridge, withdraw it from the

tool while sliding the button on the front of the cartridge.

• To insert the battery cartridge, align the tongue on the

battery cartridge with the groove in the housing and slip

it into place. Always insert it all the way until it locks in

place with a little click. If you can see the red part on

the upper side of the button, it is not locked completely.

Insert it fully until the red part cannot be seen. If not, it

may accidentally fall out of the tool, causing injury to

you or someone around you.

• Do not use force when inserting the battery cartridge. If

the cartridge does not slide in easily, it is not being

inserted correctly.

Switch action (Fig. 2)

First, depress the switch to turn on the light.

Second, if you depress the switch again, the light is

switched off and the bulb lights on.

Third, depress the switch to turn off the bulb.

ASSEMBLY

Replacing fluorescent tube (Fig. 3)

CAUTION:

• Do not give the fluorescent tube a shock or mar it. It

may result in a risk of breakage of the glass and a

serious personal injury.

• Do not touch the fluorescent tube which is hot in use or

immediately after putting out light. You may get burnt.

• Always be sure that the battery cartridge is removed

before replacing the fluorescent tube or maintenance.

1. Loosen the screw ring fully.

2. Pull the lamp cover straight out of the main unit.

3. Remove the cap from the fluorescent tube.

4. Pull out the fluorescent tube.

Then replace with a new Makita specified one.

Follow the procedure below to install the disassembled

parts.

1. Insert the cap into the top of a new fluorescent tube.

2. Insert the lamp cover so that the slits on the lamp

cover fit into the protrusion on the tool.

3. Insert the fluorescent tube into the tool.

4. Tighten the screw ring firmly.

Replacing bulb (Fig. 4, 5 & 6)

CAUTION:

The bulb is very hot immediately after operation. Wait until

the bulb cools off before attempting to replace it.

1. Remove the head cover by turning it

counterclockwise.

Then remove the reflector together with the bulb.

2. Remove the bulb holder by loosening it.

Turn the protruding part of bulb counterclockwise from

its back and remove the bulb.

3. Replace the bulb with a new one.

• Insert the new bulb into the bulb holder.

• Secure the bulb holder by screwing the bulb holder

into the reflector.

Strap (Fig. 7 & 8)

Install the strap on the tool. (Fig. 7)

When storing the tool, hang the metal fitting of the strap

on the ring of the tool. (Fig. 8)

Metal hook (Fig. 9)

Pivot the metal hook upright before using it.

The hook can be turned at 360° and removed.

MAINTENANCE

To maintain product safety and reliability, repairs,

maintenance or adjustment should be carried out by a

Makita Authorized Service Center.

ACCESSORIES

CAUTION:

These accessories or attachments are recommended for

use with your Makita tool specified in this manual. The use

of any other accessories or attachments might present a

risk of injury to persons. The accessories or attachments

should be used only in the proper and intended manner.

• Bulb set (2 pcs.)

• Fluorescent tube

• Shoulder strap

• Various type of Makita genuine batteries and chargers

Model Voltage

Battery

cartridge

Operating time

Fluorescent

tube

Bulb

BML184

18 V

14.4 V

BL1830

BL1430

Approx.

200 min

Approx.

900 min

Extinction

Property of

switch

Only

Fluorescent tube

lights on

Only bulb lights

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita BML184 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita BML184 Manual

Product: