600757
4
Zoom out
Zoom in
Previous page
1/48
Next page
4
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
Specifications and battery cartridge may differ from country to country.
Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
END004-4
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
...... Read instruction manual.
............. Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
Intended use
ENE037-1
The tool is intended for cutting sheet steel and stainless
sheet steel.
General Power Tool Safety
Warnings GEA010-1
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
CORDLESS SHEAR SAFETY
WARNINGS
GEB067-1
1. Hold the tool firmly.
2. Secure the workpiece firmly.
3. Keep hands away from moving parts.
4. Edges and chips of the workpiece are sharp. Wear
gloves. It is also recommended that you put on
thickly bottomed shoes to prevent injury.
5. Do not put the tool on the chips of the workpiece.
Otherwise it can cause damage and trouble on the
tool.
6. Do not leave the tool running. Operate the tool
only when hand-held.
7. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
8. Do not touch the blade or the workpiece
immediately after operation; they may be
extremely hot and could burn your skin.
9. Avoid cutting electrical wires. It can cause serious
accident by electric shock.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to safety
rules for the subject product. MISUSE or failure to
follow the safety rules stated in this instruction
manual may cause serious personal injury.
1. Button
2. Red part
3. Battery cartridge
4. Switch lever
5. Indicating lamp
6. Hex wrench
7. Screw
8. Center blade
9. Thickness gauge
10. Side blade
11. Hex socket head bolt
12. Oil supply
13. Pin
14. Limit mark
15. Brush holder cover
16. Notch
17. Screwdriver
18. Brush holder cap
Model BJS160 BJS161 BJS100 BJS101
Max. cutting capacities
Steel up to 400 N/mm
2
1.6 mm (16 ga.) 1.0 mm (20 ga.)
Steel up to 600 N/mm
2
1.2 mm (18 ga.) 0.7 mm (23 ga.)
Aluminum up to 200 N/mm
2
2.5 mm (13 ga.) 2.5 mm (12 ga.)
Min. cutting radius 250 mm 30 mm
Strokes per minute (min
-1
) 4,300 4,300
Overall length 362 mm 364 mm
Net weight 1.9 kg 2.0 kg 1.9 kg 2.0 kg
Rated voltage D.C. 14.4V D.C. 18V D.C. 14.4V D.C. 18V
Cd
Ni-MH
Li-ion
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita BJS100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita BJS100 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info