598569
4
Zoom out
Zoom in
Previous page
1/53
Next page
4
Start the Blower only in accordance with the instructions.
Do not use any other methods for starting the engine (6) !
Use the blower and the tools supplied only for applications specified.
Start the blower engine only after the entire tool has been assembled.
Operation of the tool is permitted only after all the appropriate acces-
sories are attached.
• The engine is to be switched off immediately if there are any engine
problems.
When working with the blower, always wrap your fingers tightly around
the handle, keeping the control handle cradled between your thumb
and forefinger. Keep your hand in this position to have your machine
under control at all times. Make sure your control handle (and grip for
vacuum attachment) are in good condition and free of moisture, pitch,
oil or grease.
Always ensure a safe, well-balanced footing.
Operate the blower in such a manner as to avoid inhalation of the
exhaust gases. Never run the engine in enclosed rooms (risk of suffo-
cation and gas poisoning). Carbon monoxide is an odorless gas.
Always ensure there is adequate ventilation.
Switch off the engine when resting and when leaving the blower unat-
tended. Place it in a safe location prevent danger to others, setting fire
to combustible materials, or damage to the machine.
Never lay the hot blower onto dry grass or onto any combustible mate-
rials.
All protective parts and guards supplied with the machine must be
used during operation.
Never operate the engine with a faulty exhaust muffler.
Shut off the engine during transport (7).
Position the blower safely during car or truck transportation to avoid
fuel leakage.
• When transporting the blower, ensure that the fuel tank is completely
empty.
Refuelling
Shut off the engine during refuelling (7), keep well away from open
flame (8) and do not smoke.
• Avoid skin contact with petroleum products. Do not inhale fuel vapor.
Always wear protective gloves during refuelling. Change and clean
protective clothing at regular intervals.
Take care not to spill either fuel or oil in order to prevent soil contamina-
tion (environmental protection). Clean the blower immediately after fuel
has been spilt. Allow wet cloths to dry before disposing in properly,
covered container to prevent spontaneous combustion.
Avoid any fuel contact with your clothing. Change your clothing imme-
diately if fuel has been spilled on it (fire hazard).
Inspect the fuel cap at regular intervals making sure that it stays
securely fastened.
Carefully tighten the locking screw of the fuel tank. Change locations to
start the engine (at least 3 meters away from the place of refuelling)
(9).
• Never refuel in closed rooms. Fuel vapors accumulate at ground level
(risk of explosions)
Only transport and store fuel in approved containers. Make sure stored
fuel is not accessible to children.
Do not attempt to refuel a hot or a running engine.
(6)
(7)
(8)
(9)
3 meters
• Resting
• Transport
• Refuelling
• Maintenance
• Tool Replacement
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita BHX2501 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita BHX2501 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 9,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita BHX2501

Makita BHX2501 User Manual - German - 18 pages

Makita BHX2501 User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info