598471
43
Zoom out
Zoom in
Previous page
1/48
Next page
43
ENG103-4
Noise
The typical A-weighted noise level determined according to
EN60745:
Sound pressure level (L
pA
): 70 dB (A) or less
Uncertainty (K): 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection.
ENG204-2
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: screwdriving without impact
Vibration emission (a
h
): 2.5 m/s
2
or less
Uncertainty (K): 1.5 m/s
2
ENG901-1
The declared vibration emission value has been measured
in accordance with the standard test method and may be
used for comparing one tool with another.
The declared vibration emission value may also be used in
a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power tool
can differ from the declared emission value depending on
the ways in which the tool is used.
Be sure to identify safety measures to protect the operator
that are based on an estimation of exposure in the actual
conditions of use (taking account of all parts of the operat-
ing cycle such as the times when the tool is switched off
and when it is running idle in addition to the trigger time).
ENG103-4
Bruit
Niveau de bruit pondéré A typique, déterminé selon
EN60745 :
Niveau de pression sonore (L
pA
) : 70 dB (A) ou moins
Incertitude (K) : 3 dB (A)
Le niveau de bruit en fonctionnement peut dépasser
80 dB (A).
Porter des protecteurs anti-bruit
ENG204-2
Vibrations
Valeur totale de vibrations (somme de vecteur triaxial) déter-
minée selon EN60745 :
Mode de travail :
vissage sans impact
Émission de vibrations (a
h
) : 2,5 m/s
2
ou moins
Incertitude (K) : 1,5 m/s
2
ENG901-1
La valeur d’émission de vibrations déclarée a été mesurée
conformément à la méthode de test standard et peut être
utilisée pour comparer les outils entre eux.
La valeur d’émission de vibrations déclarée peut aussi être
utilisée pour l’évaluation préliminaire de l’exposition.
AVERTISSEMENT :
L’émission de vibrations lors de l’usage réel de l’outil élec-
trique peut être différente de la valeur d’émission déclarée,
suivant la façon dont l’outil est utilisé.
• Les mesures de sécurité à prendre pour protéger l’utili-
sateur doivent être basées sur une estimation de l’exposi-
tion dans des conditions réelles d’utilisation (en tenant
compte de toutes les composantes du cycle d’utilisation,
comme par exemple le moment de sa mise hors tension,
lorsqu’il tourne à vide et le moment de son déclenche-
ment).
ENG103-4
Geräusch
Typischer A-bewerteter Geräuschpegel ermittelt gemäß
EN60745:
Schalldruckpegel (L
pA
): 70 dB (A) oder weniger
Ungewissheit (K): 3 dB (A)
Der Lärmpegel kann während des Betriebs 80 dB (A) über-
schreiten.
Gehörschutz tragen
ENG204-2
Vibration
Vibrationsgesamtwert (Drei-Achsen-Vektorsumme) ermittelt
gemäß EN60745:
Arbeitsmodus: Schraubbetrieb ohne Schlag
Vibrationsemission (a
h
): 2,5 m/s
2
oder weniger
Ungewissheit (K): 1,5 m/s
2
ENG901-1
Der angegebene Vibrationsemissionswert wurde im Eink-
lang mit der Standardprüfmethode gemessen und kann für
den Vergleich zwischen Maschinen herangezogen werden.
Der angegebene Vibrationsemissionswert kann auch für eine
Vorbewertung des Gefährdungsgrads verwendet werden.
WARNUNG:
Die Vibrationsemission während der tatsächlichen Benut-
zung des Elektrowerkzeugs kann je nach der Benutzungs-
weise der Maschiene vom angegebenen Emissionswert
abweichen.
Identifizieren Sie Sicherheitsmaßnahmen zum Schutz des
Benutzers anhand einer Schätzung des Gefährdungsgrads
unter den tatsächlichen Benutzungsbedingungen (unter
Berücksichtigung aller Phasen des Arbeitszyklus, wie z. B.
Ausschalt- und Leerlaufzeiten der Maschiene zusätzlich zur
Betriebszeit).
ENG103-4
Rumore
Il tipico livello di rumore pesato A determinato secondo
EN60745:
Livello pressione sonora (L
pA
): 70 dB (A) o meno
Incertezza (K): 3 dB (A)
Il livello di rumore durante il lavoro potrebbe superare gli
80 dB (A).
Indossare i paraorecchi
ENG204-2
Vibrazione
Il valore totale di vibrazione (somma vettore triassiale) deter-
minato secondo EN60745:
Modalità operativa: avvitamento senza impatto
Emissione di vibrazione (a
h
): 2,5 m/s
2
o meno
Incertezza (K): 1,5 m/s
2
ENG901-1
Il valore di emissione delle vibrazioni dichiarato è stato mis-
urato conformemente al metodo di test standard, e può
essere usato per paragonare un utensile con un altro.
Il valore di emissione delle vibrazioni dichiarato può anche
essere usato per una valutazione preliminare dell’esposiz-
ione.
AVVERTIMENTO:
L’emissione delle vibrazioni durante l’uso reale dell’utensile
elettrico può differire dal valore di emissione dichiarato a
seconda dei modi in cui viene usato l’utensile.
Identificare le misure di sicurezza per la protezione
dell’operatore basate sulla stima dell’esposizione nelle con-
dizioni reali d’utilizzo (tenendo presente tutte le parti del
ciclo operativo, come le volte in cui l’utensile viene spento e
quando gira a vuoto, oltre al tempo di funzionamento).
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita BFT082F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita BFT082F in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info