598448
7
Zoom out
Zoom in
Previous page
1/15
Next page
7
LED indicator / Beeper
LED indicator / Beeper on the tool shows the following functions.
013073
Function Status
Status of the LED indicator/beeper
Action to be
taken
LED indicator Beeper
Auto-stop fastening
This function works when the tool has
reached the preset fastening torque
and normal tightening has been com-
pleted. This helps overtightening to
be avoided.
Lights up in
green for
approximately
one second.
——
Delayed re-start
For approximately one second after
auto-stop fastening, the tool does not
start even if the switch trigger is
pulled.
Warning against
insufficient fastening
Insufficient fastening has been per-
formed when the switch trigger has
released before reaching the preset
fastening torque.
Lights up in red. A long beep
Retighten the
screw.
Warning for battery
cartridge capacity
This indicates the appropriate time to
replace the battery cartridge when
the battery power becomes low.
Flickers in red
slowly.
A series of long
beeps
Replace the
battery with fully
charged one.
Checking the
remaining battery
capacity, Autostop
This function works when the battery
power is almost used up. At this time,
tool stops immediately.
Lights up in red. A long beep
Replace the
battery with fully
charged one.
Check the LED indi-
cator, lamp and
beeper operation
This function works to check the
proper operation of the LED indicator,
lamp and beeper when a battery car-
tridge has been inserted into the tool.
Lights up first in
green, next red.
(And then the
lamp comes
on.)
A series of very
short beeps
Anti-reset of control-
ler
This function works when an abnor-
mal drop of the battery voltage occurs
for some reason, and the tool stops.
Flickers in red
and green alter-
natively.
A series of short
beeps
Replace the
battery with fully
charged one.
Overheat
This function works when the temper-
ature of the controller goes up very
highly, and the tool stops.
Flickers in red
quickly.
A series of short
beeps
Remove the
battery car-
tridge immedi-
ately and cool
the tool down.
Operation error of
the switch trigger
This function works to avoid the tool’s
immediate start upon insertion of bat-
tery cartridge into the tool with the
switch trigger being pulled.
Flickers in red
and green alter-
natively.
A series of short
beeps
Release the
switch trigger.
Warning for limit of
the fastening capac-
ity
The tool automatically stops without
the clutch working when exceeding
the fastening capacity limit.
Flickers in red
a
nd gree
n alter-
natively.
A series of short
beeps
Remove the
battery car-
tridge and then
install it again.
Be sure to use
the tool under
load within its
capacity.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita BFL061F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita BFL061F in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita BFL061F

Makita BFL061F User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info