598440
11
Zoom out
Zoom in
Previous page
1/28
Next page
11
Preparations
Before you can put the brushcutter into operation, you must
assemble and prepare it for regular operation.
The brushcutter is not allowed to be started until it
has been completely assembled and a functional
test has been carried out!
Wear protective gloves for all work on the brus-
hcutter!
Installing the handle
Depending on whether you have decided to purchase the
BCX3400 or the BCX3410 brushcutter, your machine will be
equipped with a C-handle or with a U-handle.
U-handle
To install the handle, lay down the brushcutter so that it is resting
on its foot in stable position.
The tool you will require is the big Allen key.
1 Place the anti-slip insert (
1) in the handle mount (2) so that
it lines up ush with the handle mount.
2 Insert the handle as shown in the illustration.
3 Place the second anti-slip insert (
3) on the handle (2) so
that it also lines up ush with the handle mount.
4 Place the handle fastening cap (
4) on top and hold it rm-
ly.
5 Insert the nuts (
5) from underneath into the drilled holes of
the handle mount, hold them in place and tighten the screws
rmly (6) at the same time (do not forget the washers).
C-handle
To install the handle, lay down the brushcutter so that it is resting
on its foot in stable position.
The tool you will require is the medium-sized Allen key.
1 Place the handle mount (
1), as shown in the illustration,
from the rear side onto the anti-slip sleeve (2) on the main
tube and hold it rmly.
2 Place the C-handle (
3), as shown in the illustration, from
above onto the anti-slip sleeve (2) so that it is resting on
the handle mount.
3 Fasten the handle by tightening the screws (
4) (do not forget
the washers).
1
2
3
4
6
5
4
3
2
1
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita BCX3410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita BCX3410 in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita BCX3410

Makita BCX3410 User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info