598440
8
Zoom out
Zoom in
Previous page
1/28
Next page
8
Maintenance
Always make sure that the brushcutter is in good
working order before using it. This includes, in
particular, the cutting tool, cutter guard, shoulder
strap, and fuel system (check for leaks). Particu-
lar attention must be paid to the cutting blades,
which must be correctly sharpened.
Metal cutting tools must be sharpened only at an
authorized service center!
A tool which has been improperly sharpened can
cause unbalance and thus considerable danger
of injury. Apart from this, the equipment may be
damaged due to vibrations.
When changing the cutting tool, cleaning the
brushcutter and the cutting tool, etc., it is essential
to switch off the engine and pull the spark plug
cap.
Never straighten or weld damaged cutting tools.
Operate the brushcutter with as little noise and pollution
as possible. In particular check the correct setting of the
carburetor.
Clean the brushcutter at regular intervals and check that all
screws and nuts are well tightened.
Never service or store the brushcutter near open ames!
Always store the brushcutter in a locked storage area, with
the fuel tank completely empty and the carburetor run dry.
Keep the brushcutter out of reach of children.
Observe the accident prevention instructions
issued by the relevant trade associations and
insurance companies.
Do not make any modications to the brushcut
-
ter! You will only be putting your own safety at
risk!
The performance of maintenance or repair work by the user
is limited to those activities described in this instruction ma-
nual. All other work must be done by the MAKITA customer
service center.
Use only original MAKITA spares and accessories. The
use of non-MAKITA spares, accessories, or cutting tools
increases the risk of accident. MAKITA will not accept any
liability for accidents or damage caused by the use of non-
approved cutting tools and xing devices of cutting tools, or
accessories.
First aid
A rst-aid kit should always be nearby as a
precaution in the event of an accident. Imme-
diately replace any items taken from the rst-aid
kit.
When calling for help, give the following information:
Place of accident
What happened
Number of persons injured
Nature of injuries
Your name
Individuals with poor circulation who are exposed
to excessive vibration may experience injury to
blood vessels or the nervous system. Vibration
may cause the following symptoms to occur in
the ngers, hands or wrists: "Falling asleep"
(numbness), tingling, pain, stabbing sensation,
alteration of skin color or of the skin. If any of
these symptoms occur, see a physician.
SERVICE
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita BCX3410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita BCX3410 in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita BCX3410

Makita BCX3410 User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info