598439
23
Zoom out
Zoom in
Previous page
1/28
Next page
23
3
2
The tools you will require are two clean rags and a base sur-
face.
Materials: 80 cm
3
of SAE 10W-30 engine oil
(classication API SF)
1 Start the engine (see chapter "Putting into operation").
2 Warm up the engine for 3–5 minutes at medium speed.
3 Lay down the brushcutter on a level surface, so that it is
resting on its foot in stable position, and wait three minu-
tes. Then the oil will have accumulated in the crankcase.
4 Cover the gasoline tank with a clean rag (
1) as shown in
the illustration.
5 Turn the dipstick (
2) out of the opening.
When laying down the dipstick, make sure that
it does not come into contact with dirt under no
circumstances whatsoever! If necessary, remove
dirt immediately with a clean rag!
6 Pour the old oil into a suitable container.
Prop up the brushcutter so that the oil ows out
on its own. Leave the brushcutter in that position
for a few minutes so that all of the oil can drop
out of the machine.
7 Clean the tank and the ller opening carefully without allo
-
wing dirt to get into the crankcase.
8 Use a suitable lling bottle to rell new engine oil up to the
bottom edge of the ller opening (3).
An engine oil bottle can be used for precise do-
sing without spilling engine oil (see extract from
the spare parts list).
9 Turn the dipstick back in again.
Quarterly maintenance
Suction head in the fuel tank
Prevent contact of the skin with fuels. Wear gloves
during the maintenance procedure.
Mineral oil products degrease the skin. In case
of repeated, longer contact, the skin will dry up.
This can result in various skin diseases. Beyond
that, allergic reactions are well known.
Contact of the eyes with fuels results in irritati-
ons. In case of eye contact, wash the affected
eye immediately with clear water. If the irritation
does not subside, a physician must be consulted
immediately!
The fuel required by the carburetor is ltered by means of the felt
of the suction head (2). Hardened or soiled felt lters must be
replaced; otherwise, there is the risk that insufcient amounts of
fuel will be conveyed and that the permissible maximum speed
of the engine will be exceeded as a result.
The tool you will require is a wire hook.
Materials: felt lter
1 Unscrew the tank cap (
1).
2 Use a wire hook to pull the suction head (
2) through the
tank cap opening.
3 Check the felt lter and replace if necessary.
4 Put the suction head back into the tank.
5 Screw the tank cap back on.
1
1
2
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita BCX3400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita BCX3400 in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita BCX3400

Makita BCX3400 User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info