598439
6
Zoom out
Zoom in
Previous page
1/28
Next page
6
Operate the brushcutter in such a manner as to avoid in-
halation of the exhaust gases. Do not start or operate the
brushcutter in closed rooms (risk of gas poisoning). Carbon
monoxide is an odorless gas; breathing exhaust fumes can
kill. Work only in well-ventilated places.
When taking a break or leaving the brushcutter unattended,
turn off the engine, make sure the cutting attachment has
stopped and set the brushcutter down in such a way that
there is no risk of injury to yourself or others.
Never put the hot brushcutter onto dry grass or onto any
combustible materials.
Shut off the engine during transport or when moving on to a
new location.
Never operate the brushcutter with a faulty exhaust muff
-
ler.
Kickback (blade thrust)
When operating the brushcutter, uncontrolled
kickback may occur. This is the case whenever the
cutting tool (4-tooth star blade) comes into contact
with solid objects such as tree stumps, fence posts,
trees, solid brushwood or large stones.
In such situations, the brushcutter will be thrown
to one side at high speed and with great force
(high risk of injury).
To avoid kickbacks, observe the following:
Clear the cutting area of any foreign objects and pay attention
to any existing planted areas and other objects.
The cutting tool must be turning at full speed before you
begin to cut.
An increased risk of injury exists in the darkly marked area
and especially when metal cutting tools are being used!
Working behavior and working techniques
Before commencing cutting, the cutting tool must have rea-
ched full working speed
Use the brushcutter only in good light and visibility. During
the winter season beware of slippery or wet areas, ice and
snow (risk of slipping). Always ensure a safe footing.
Never cut above your shoulder height.
Never stand on a ladder and run the brushcutter.
Never climb up into trees to perform cutting operations with
the brushcutter.
Never work on unstable surfaces.
Make sure the cutting area is free of foreign ob-
jects such as stones and metal items. Foreign
particles can rebound (danger of injury!), damage
the cutting tool and cause dangerous kickbacks
(see last section).
Work break
Transport
Refueling
Maintenance
Tool replacement
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita BCX3400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita BCX3400 in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita BCX3400

Makita BCX3400 User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info