598435
7
Zoom out
Zoom in
Previous page
1/24
Next page
7
Storage
- The brushcutter must be safely stored in a dry room. Use the
tool protection for metal cutting tools. Keep the brushcutter out
of reach of children.
- If the brushcutter is stored for a long period of time, it should be
given a thorough maintenance check and a complete inspection
at an authorized MAKITA service centre.
- If the brushcutter is stored for a long period of time, the fuel
tank should be completely emptied and the carburetor run dry.
Fuels may only be stored for a limited period of time and could
cause deposits to form in the tank or in the carburetor.
- Fuel remains in reserve canisters should be used for other
engines or disposed of.
Maintenance
- Always make sure the brushcutter is in good working order
before using it. This includes in particular the cutting tool,
guard, harness and fuel system (check for leaks). Particular
attention must be paid to the cutting blades, which must be
correctly sharpened.
CAUTION: Metal cutting tools must be sharpened only at an
authorized service centre!
A tool which has been improperly sharpened can cause
unbalance and thus considerable danger of injury. Apart from
this, the equipment may be damaged due to vibrations.
- When changing the cutting tool, cleaning the brushcutter and
the cutting tool etc., it is essential to switch off the engine
and pull the spark plug cap.
- Replace cracked, bent, warped, damaged or dull cutting
tools immediately. Never straighten or weld damaged cutting
tools.
- Operate the brushcutter with as little noise and pollution as pos-
sible. In particular check the correct setting of the carburetor.
- Clean the brushcutter at regular intervals and check that all
screws and nuts are well tightened.
- Never service or store the brushcutter near open ames (16)!
- Always store the brushcutter in a locked storage area, with the
fuel tank completely empty and the carburetor run dry.
Observe the accident prevention instructions issued by the
relevant trade associations and insurance companies. Do not
make any modi cations to the brushcutter - you will only be
putting your own safety at risk!
The performance of maintenance or repair work by the user is
limited to those activities described in this instruction manual. All
other work must be done by the MAKITA customer service (17).
Use only original MAKITA spares and accessories.
The use of non-MAKITA spares, accessories, or cutting tools in-
creases the risk of accident. MAKITA will not accept any liability for
accidents or damage caused by the use of non-approved cutting
tools and xing devices of cutting tools, or accessories.
First Aid
A rst-aid kit should always be nearby as a precaution in the
event of an accident.
Immediately replace any items taken from the rst aid kit.
When calling for help, give the following information:
Place of accident, what happened, number of persons injured,
nature of injuries, your name.
NOTE
Individuals with poor circulation who are exposed to excessive
vibration may experience injury to blood vessels or the nervous
system. Vibration may cause the following symptoms to occur in
the ngers, hands or wrists: ”Falling asleep” (numbness), tingling,
pain, stabbing sensation, alteration of skin colour or of the skin. If
any of these symptoms occur, see a physician!
18
16
19
17
SERVICE
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita BCM3310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita BCM3310 in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info