690564
15
Zoom out
Zoom in
Previous page
1/172
Next page
Checking throttle valve
If the control cable is bent or caught, the throttle valve does not con-
tact with the idle adjusting screw, and it prevents the engine from
proper idling. In such a case, reposition the control cable to ensure
proper valve movement.
1
2
3
4
1. Throttle valve 2. Idling adjusting screw 3. Control cable
4. Throttle valve stopper
If the throttle valve does not touch the throttle valve stopper even you
pull the throttle trigger fully or if the throttle valve does not touch the
idling adjusting screw while idling, turn the cable adjusting bolt as
follows:
1. Loosen the xing nut.
2. If the throttle valve does not touch the throttle valve stopper, turn
the cable adjusting bolt counterclockwise.
If the throttle valve does not touch the idling adjusting screw, turn the
cable adjusting bolt clockwise.
1
2
1. Fixing nut 2. Cable adjusting bolt
3. Tighten the xing nut to fasten the cable adjusting bolt.
Cleaning carburetor cover
If the carburetor cover gets dirty and it is difcult to check the throttle
valve, clean the carburetor cover as follows:
NOTICE: Never use gasoline, benzine, thinner, alcohol or
the like for cleaning the carburetor cover. Otherwise it may be
tarnished.
1. Pass a slotted screwdriver through the hole on the engine cover.
Release the clamp of the carburetor cover.
1
1. Carburetor cover
2. Clean the carburetor cover.
NOTICE: Use wet clean cloth for cleaning the carburetor
cover.
3. Return the carburetor cover. Make sure the clamp of the carbure-
tor cover clicks when it is set in place.
Inspecting bolts, nuts and screws and other parts
Retighten loose bolts, nuts, etc.
Check for fuel and oil leakage.
Replace damaged parts with new ones for safety operation.
Cleaning engine, cooling air inlet
Keep engine clean by wiping down with a cloth rag.
Keep the cylinder ns free of dust or dirt. Dust or dirt adhering to the
ns may cause engine overheat and piston seizure.
Blowing air is taken in from the air inlet vent. When airow drops
down during operation, stop engine and inspect the air inlet vent for
any blockages. Clean it if necessary. Such a blockage may cause
overheat and damage the engine.
Replacing gaskets and packings
Replace gaskets and packings if the engine is disassembled.
Any maintenance of adjustment work that is not included and
described in this manual is only to be performed by Authorized
Service Agent.
Storage
WARNING: When draining the fuel, stop the engine and
wait for the engine to cool down. Failure to do so may cause
burns or re.
15 ENGLISH
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita B7660WH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita B7660WH in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 42,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info