601095
7
Zoom out
Zoom in
Previous page
1/68
Next page
7
ENGLISH
Explanation of general view
1 Compressor air output per
minute
2 Stapling frequency (times/min)
3 Depth adjusting plate
4Hex wrench
5Hook
6Screw
7 Lock pin
8 Pusher
9 Air fitting
10 Air socket
11 Trigger
12 Contact element
13 Workpiece
14 Exhaust cover
15 Driver guide
16 Latch
17 Slotted bit screwdriver
18 Latch
19 Door
20 Drain cock
21 Air filter
22 Oiler
23 Pneumatic oil
SPECIFICATIONS
Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
Note: Specifications may differ from country to country.
IMPORTANT SAFETY INSTRUCTIONS
ENB103-1
WARNING: WHEN USING THIS TOOL, BASIC
SAFETY PRECAUTIONS SHOULD ALWAYS BE FOL-
LOWED TO REDUCE THE RISK OF PERSONAL
INJURY, INCLUDING THE FOLLOWING:
READ ALL INSTRUCTIONS.
For personal safety and proper operation and main-
tenance of the tool, read this instruction manual
before using the tool.
• Always wear safety glasses to protect your eyes
from dust or staple injury.
WARNING:
It is an employer’s responsibility to enforce the use
of safety eye protection equipment by the tool
operators and by other persons in the immediate
working area.
For Australia and New Zealand only
Always wear safety glasses and face shield to pro-
tect your eyes from dust or staple injury. The safety
glasses and the face shield should conform with
the requirements of AS/NZS 1336.
WARNING:
It is an employer’s responsibility to enforce the use
of safety eye protection equipment by the tool
operators and by other persons in the immediate
working area.
Wear hearing protection to protect your ears
against exhaust noise and head protection. Also
wear light but not loose clothing. Sleeves should
be buttoned or rolled up. No necktie should be
worn.
• Rushing the job or forcing the tool is dangerous.
Handle the tool carefully. Do not operate when
under the influence of alcohol, drugs or the like.
General Tool Handling Guidelines:
1. Always assume that the tool contains fasteners.
2. Do not point the tool toward yourself or anyone
whether it contains fasteners or not.
3. Do not activate the tool unless the tool is placed
firmly against the workpiece.
4. Respect the tool as a working implement.
5. No horseplay.
6. Do not hold or carry the tool with a finger on the
trigger.
7. Do not load the tool with fasteners when any one
of the operating controls is activated.
8. Do not operate the tool with any power source
other than that specified in the tool operating/
safety instructions.
An improperly functioning tool must not be used.
Model AT1150A AT2550A
Air pressure 0.44 – 0.83 MPa (4.4 – 8.3 bar)
Applicable staples 25 mm – 50 mm
Staple capacity 140 pcs.
Min. hose diameter 6.5 mm
Dimensions (L x W x H) 370 mm x 87 mm x 290 mm 370 mm x 76 mm x 260 mm
Net weight 2.3 kg 2.3 kg
Safety glasses
Face shield
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita AT2550A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita AT2550A in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info