657979

Makita AN935H Manual

10
Zoom out
Zoom in
Previous page
1/84
Next page
10 ENGLISH
Selecting air hose
CAUTION: Low air output of the compressor,
or a long or smaller diameter air hose in relation
to the nailing frequency may cause a decrease in
the driving capability of the tool.
►Fig.3
Use a high pressure resistant air hose.
Use an air hose as large and as short as possible to
assurecontinuous,efcientnailingoperation.
Lubrication
►Fig.4: 1. Pneumatic tool oil
Oil the tool with pneumatic tool oil by placing two or
threedropsintotheairtting.Thisshouldbedone
beforeandafteruse.
Forproperlubrication,thetoolmustberedacoupleof
timesafterpneumatictooloilisintroduced.
FUNCTIONAL
DESCRIPTION
CAUTION: Before adjusting or checking func-
tion on the tool, always lock the trigger by turning
the trigger lock lever to the lock position , and
disconnect the air hose from the tool.
Adjusting depth of nailing
Thistollhastheadjusterofthenailingdepth.Tomod-
ulatethenailingdepth,turntheadjustertotheproper
depth.
►Fig.5: 1.Adjuster
Theadjustablerangeis8.5mm(11/32").(Onefullturn
allows1.25mm(1/16")adjustment.)
►Fig.6: 1.Toodeep2. Flush 3.Tooshallow
Hook
CAUTION: Always disconnect the hose when
hanging the tool using the hook.
CAUTION: Never hook the tool at high loca-
tion or on potentially unstable surface.
CAUTION: Do not hang the hook from the
waist belt.Ifthenaileraccidentallydrops,itmay
resultinmisringandpersonalinjuries.
Thehookisusefulforhangingupthetooltemporarily.
Thehookcanbeturnedwhilepushingthebottomtothe
desired angle.
►Fig.7: 1. Hook
Furthermore,thishookcanbeinstalledoneitherside
ofthetool.
Tochangetheinstallationposition,removetheboltwith
a hex wrench. Install the hook on another side and then
secureitrmlywiththebolt.
►Fig.8: 1. Hook 2. Bolt
Nose adapter
Topreventthesurfaceofworkpiecefrombeing
scratchedordamaged,usethenoseadapter.
Todetachthenoseadapterfromitshousingbase,pull
thenoseadapterinthedirectionofthearrow.
►Fig.9: 1. Nose adapter
Toattachthenoseadaptertothecontactelement,
press it onto the contact element until the recessed
partsinfourplacesinsidethenoseadaptertinfour
protrusionsofthecontactelement.
►Fig.10: 1. Nose adapter 2.Contactelement
3. Protrusion 4. Recessed part
Air duster
CAUTION: Do not aim the ejection port of the
air duster to someone. Also, keep your hands and
foot away from the ejection port.Iftheairduster
buttonisaccidentallypushed,itmaycauseaper-
sonalinjury.
CAUTION: Always check your surroundings
before using the air duster.Blowndustorobjects
may hit someone.
CAUTION: Do not connect or disconnect the
air hose while pushing the air duster button.
Theairsuppliedtothetoolcanalsobeusedasanair
duster. You can clean the work area by pressing the
button on the grip end.
►Fig.11: 1. Button
NOTICE:Afterusingtheairduster,thedrivingforce
ofthetoolwilltemporarilydecline.Waituntiltheair
pressure recovers in this case.
NOTICE:Performatestblowifyouusetheair
dusterimmediatelyaftertheoilwasapplied.Theoil
may be sprayed with the air.
ASSEMBLY
CAUTION: Before carrying out any work on
the tool, always lock the trigger by turning the
trigger lock lever to the lock position , and
disconnect the air hose from the tool.
Loading nailer
CAUTION: Do not use deformed nails or
linked sheet.
1. Disconnect the air hose.
2. Depress the latch lever and open the door and
magazine cap.
►Fig.12: 1. Latch lever 2. Door 3. Magazine cap
►Fig.13
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita AN935H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita AN935H in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Portuguese, Spanish as an attachment in your email.

The manual is 17,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info