598399
6
Zoom out
Zoom in
Previous page
1/60
Next page
6
ENGLISH
Explanation of general view
1 Compressor air output per
minute
2 Nailing frequency (times/min.)
3Adjuster
4 Shallow
5Deep
6 Too deep
7Flush
8 Too shallow
9Hook
10 Hole
11 Protrusion
12 Nose adapter
13 Lever
14 Door
15 Adjustfit
16 Change plate
17 Arrow
18 Nail guide
19 Feeder
20 Trigger
21 Contact element
22 Change lever
23 0.7 mm or less thick for steel
plate
24 Thickness of workpiece
25 10 mm or more
26 C-shaped steel
(Thickness 1.6 mm – 2.3 mm)
27 Nail driven to a proper depth
28 Nail driven too deep will cause
deformation of workpieces
29 Nail length
30 Wood thickness
31 Concrete range 10 – 15 mm
32 Exhaust cover
33 Small rod
34 Cap
35 Drain cock
36 Air filter
37 Oiler
38 Pneumatic oil
39 Screwdriver
SPECIFICATIONS
Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
Note: Specifications may differ from country to country.
Intended use
The tool is intended for the preliminary interior work such
as fixing floor joists or common rafters and framing work
in 2” x 4” housing.
IMPORTANT SAFETY INSTRUCTIONS
ENB109-2
WARNING:
WHEN USING THIS TOOL, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS BE FOLLOWED
TO REDUCE THE RISK OF PERSONAL INJURY,
INCLUDING THE FOLLOWING:
READ ALL INSTRUCTIONS.
For personal safety and proper operation and mainte-
nance of the tool, read this instruction manual before
using the tool.
Always wear safety glasses to protect your eyes from
dust or nail injury.
WARNING:
It is an employer’s responsibility to enforce the use of
safety eye protection equipment by the tool operators
and by other persons in the immediate working area.
For Australia and New Zealand only
Always wear safety glasses and face shield to protect
your eyes from dust or nail injury. The safety glasses
and the face shield should conform with the require-
ments of AS/NZS 1336.
WARNING:
It is an employer’s responsibility to enforce the use of
safety eye protection equipment by the tool operators
and by other persons in the immediate working area.
• Wear hearing protection to protect your ears against
exhaust noise and head protection. Also wear light but
not loose clothing. Sleeves should be buttoned or rolled
up. No necktie should be worn.
Model AN620H
Air pressure 0.98 – 2.26 MPa (9.8 – 22.6 bar)
Nail length
Wire-collated coil nail 45 mm – 65 mm
Sheet-collated coil nail 38 mm – 65 mm
Nail capacity
Wire-collated coil nail 250 pcs, 300 pcs
Sheet-collated coil nail 200 pcs
Min. hose diameter 5.0 mm
Dimensions (L x H x W) 282 mm x 277 mm x 136 mm
Net weight 1.8 kg
Safety glasses
Face shield
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita AN620H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita AN620H in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info