598725
5
Zoom out
Zoom in
Previous page
1/72
Next page
5
ENGLISH
Explanation of general view
1 Battery cartridge
2 Charging lights
3 Refreshing lights
4 Terminal cover
5 Automatic refreshing adapter
6 Conditioned refreshing button
7 Battery charger
CAUTION:
Use this adapter with Makita battery charger DC14SC, DC14SA, DC18SC, DC24SA or DC24SC.
Use a power source with the voltage specified on the nameplate of the charger.
Do not charge the battery cartridge in a location exposed to direct sunlight.
Do not charge the battery cartridge in presence of flammable liquids or gases.
Charge the battery cartridge with room temperature at 10°C – 40°C (50°F – 104°F).
Never carry charger by cord or yank it to disconnect from receptacle.
Do not expose charger and adapter to rain or snow.
Non-rechargeable batteries cannot be charged with this adapter.
Do not attempt to use a step-up transformer, an engine generator or DC power receptacle.
Do not allow anything to cover or clog the charger vents.
After charging, unplug the charger from the power source.
Do not disassemble charger and adapter.
The battery charger is not intended for use by young children or infirm persons without supervision.
Young children should be supervised to ensure that they do not play with the battery charger.
Automatic refreshing charge
1. Insert the adapter into charger until it stops adjusting to the guide of charger. Terminal cover of charger can be
opened with inserting and closed with pulling out the adapter.
2. Plug the battery charger into your power source. Two charging lights will flash in green color repeatedly.
3. Insert the battery cartridge into adapter until it stops adjusting to the guide of adapter.
4. When the battery cartridge is inserted, the adapter selects normal charge or automatic refreshing charge auto-
matically.
5. When the adapter selects normal charge, the charging light colors will change from green to red and normal
charge will begin.
6. When the adapter selects automatic refreshing charge, the charging light colors will change from green to red and
one refreshing light will flash in green color repeatedly and quickly. Then, automatic refreshing charge will begin.
7. With the finish of normal charge and automatic refreshing charge, the charging light colors will change from red to
green.
8. When you press the conditioned refreshing button, the charging light colors will change from green to red and one
refreshing light will flash in green color repeatedly. Then, conditioned refreshing charge will begin.
9. With the finish of conditioned refreshing charge, the charging light colors will change from red to green. Then, the
refreshing lights indicate the battery capacity compared with a new battery.
The indication of refreshing lights is as follows:
( : ON : Flashing : OFF)
Refreshing lights
Indication
Automatic refreshing charge
Conditioned refreshing charge
Capacity is 80% – 100%. (new battery)
Capacity is 60% – 80%. (wearing battery)
Capacity is 40% – 60%. Indicates a short service life. (wearing battery)
Capacity is 0% – 40%. Charging lights flash alternately in green and red color. Indicates the
battery cartridge is worn out.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita ADP03 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita ADP03 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info