Manual Makita 9920 (page 6 of 8) (English, German, Dutch, Danish, French, Italian, Norwegian)

78502

Zoom out

Zoom in

1/8

Speed adjusting dial (Fig. 7)

For 9903, 9920 and 9404

The belt speed can be infinitely adjusted between

210 m and 440 m per minute by turning the speed

adjusting dial to a given number setting from 1 to 5.

Higher speed is obtained when the dial is turned in the

direction of number 5; lower speed is obtained when

it is turned in the direction of number 1. Select the

proper speed for the workpiece to be sanded.

CAUTION:

The speed adjusting dial can be turned only as far as

5 and back to 1. Do not force it past 5 or 1, or the

speed adjusting function may no longer work.

Sanding operation (Fig. 8)

Hold the machine firmly with both hands. Turn the

machine on and wait until it attains full speed. Then

gently place the machine on the workpiece surface.

Keep the belt flush with the workpiece at all times and

move the machine back and forth. Never force the

machine. The weight of the machine applies

adequate pressure. Excessive pressure may cause

stalling, overheating of the motor, burning of the

workpiece and possible kickback.

Connecting to Makita vacuum cleaner or dust

collector

Cleaner sanding operations can be performed by

connecting the belt sander to Makita vacuum cleaner

or dust collector.

When connecting to Makita vacuum cleaner (Model

406/431), an optional hose 28 mm in inner diameter is

necessary. See Fig. 9.

When connecting to Makita dust collector (Model

420/420S), the optional hose is not necessary. You

can connect the belt sander directly to the hose of the

dust collector.

Belt sander stand (optional accessory)

(Fig. 10)

The belt sander stand is handy for sanding small

workpieces or deburring workpieces.

Sanding shoe (optional accessory) (Fig. 11)

The sanding shoe readily allows you to sand work-

pieces more evenly.

MAINTENANCE

CAUTION:

Always be sure that the machine is switched off and

unplugged before carrying out any work on the

machine.

Replacement of carbon brushes (Fig. 12 & 13)

Replace carbon brushes when they are worn down to

the limit mark. Both identical carbon brushes should

be replaced at the same time.

To maintain product safety and reliability, repairs,

maintenance or adjustment should be carried out by a

Makita Authorized Service Center.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita 9920 in the language / languages: English, German, Dutch, Danish, French, Italian, Norwegian as an attachment in your email.

The manual is 0,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita 9920 Manual

Product: