Manual Makita 9910 (page 6 of 8) (English, German, Dutch, Danish, French, Italian, Norwegian)

390084

Zoom out

Zoom in

1/8

Sanding operation (Fig. 6)

CAUTION:

When sanding drywalls, connect the tool Makita vacuum

cleaner.

Hold the tool firmly with both hands. Turn the tool on and

wait until it attains full speed. Then gently place the tool

on the workpiece surface. Keep the belt flush with the

workpiece at all times and move the tool back and forth.

Never force the tool. The weight of the tool applies ade-

quate pressure. Excessive pressure may cause stalling,

overheating of the motor, burning of the workpiece and

possible kickback.

Speed adjusting dial (Fig.7)

For 9911 only

The belt speed can be infinitely adjusted between 75 m

and 270 m per minute by turning the speed adjusting dial

to a given number setting from 1 to 6. Higher speed is

obtained when the dial is turned in the direction of num-

ber 6; lower speed is obtained when it is turned in the

direction of number 1. Select the proper speed for the

workpiece to be sanded.

CAUTION:

The speed adjusting dial can be turned only as far as 6

and back to 1. Do not force it past 6 or 1, or the speed

adjusting function may no longer work.

Clamps (optional accessory) (Fig.8)

This tool can be operated in the inverted position. To do so, secure the tool to a stable workbench with two clamps as

shown in Fig.8.

Connecting to Makita vacuum cleaner or dust collector

Cleaner sanding operations can be performed by connecting the belt sander to Makita vacuum cleaner or dust collec-

tor.

When connecting to Makita vacuum cleaner (Model 406/431), an optional hose 28 mm in inner diameter is necessary.

See the figure below.

When connecting to Makita dust collector (Model 420), the optional hose is not necessary. You can connect the belt

sander directly to the hose of the dust collector.

MAINTENANCE

CAUTION:

Always be sure that the tool is switched off and

unplugged before carrying out any work on the tool.

Replacement of carbon brushes (Fig.9, 10 & 11)

Replace carbon brushes when they are worn down to the

limit mark. First, remove the belt cover from the tool, then

replace the carbon brushes. Both identical carbon

brushes should be replaced at the same time.

To maintain product safety and reliability, repairs, mainte-

nance or adjustment should be carried out by a Makita

Authorized Service Center.

Makita vacuum cleaner

Hose of vacuum cleaner Optional hose 28 mm in inner dia.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita 9910 in the language / languages: English, German, Dutch, Danish, French, Italian, Norwegian as an attachment in your email.

The manual is 0,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita 9910 Manual

Product: