448278
10
Zoom out
Zoom in
Previous page
1/68
Next page
10
ACCESSORIES
CAUTION:
These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Wheel guard (Wheel cover)
Inner flange
Depressed center wheels
Lock nut (For depressed center wheel)
Rubber pad
Abrasive discs
Lock nut (For abrasive disc)
Lock nut wrench
Wire cup brush
Wire bevel brush 85
Side grip
Diamond wheel
Dust collecting wheel guard
For Model 9561CR, 9561CVR, 9562CR, 9562CVR
For European countries only
Noise
ENG101-1
The typical A-weighted noise level determined according
to EN60745-2-3:
Sound pressure level (L
pA
): 83 dB (A)
Uncertainty (K): 3 dB (A)
The noise level under working may exceed 85 dB (A).
Wear ear protection.
Vibration
ENG208-2
The vibration total value (tri-axial vector sum) determined
according to EN60745-2-3:
Work mode: surface grinding
Vibration emission (a
h,AG
): 8.5 m/s
2
Uncertainty (K): 1.5 m/s
2
Cutting-off or wire brushing may have different vibration
emission values.
For Model 9564CR, 9564CVR
For European countries only
Noise
ENG101-1
The typical A-weighted noise level determined according
to EN60745-2-3:
Sound pressure level (L
pA
): 83 dB (A)
Uncertainty (K): 3 dB (A)
The noise level under working may exceed 85 dB (A).
Wear ear protection.
Vibration
ENG208-2
The vibration total value (tri-axial vector sum) determined
according to EN60745-2-3:
Work mode: surface grinding
Vibration emission (a
h,AG
): 8.0 m/s
2
Uncertainty (K): 1.5 m/s
2
Cutting-off or wire brushing may have different vibration
emission values.
For Model 9565CR, 9565CVR
For European countries only
Noise
ENG101-1
The typical A-weighted noise level determined according
to EN60745-2-3:
Sound pressure level (L
pA
): 82 dB (A)
Uncertainty (K): 3 dB (A)
The noise level under working may exceed 85 dB (A).
Wear ear protection.
Vibration
ENG208-2
The vibration total value (tri-axial vector sum) determined
according to EN60745-2-3:
Work mode: surface grinding
Vibration emission (a
h,AG
): 8.0 m/s
2
Uncertainty (K): 1.5 m/s
2
Cutting-off or wire brushing may have different vibration
emission values.
EC-DECLARATION OF CONFORMITY
ENH001-8
9561CR, 9561CVR, 9562CR, 9562CVR, 9564CR,
9564CVR, 9565CR, 9565CVR
We declare under our sole responsibility that this product
is in compliance with the following standards of
standardized documents;
EN50144, EN55014, EN61000 in accordance with
Council Directives, 2004/108/EC, 98/37/EC.
CE 2008
Tomoyasu Kato
Director
Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita 9564CR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita 9564CR in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info