690991
8
Zoom out
Zoom in
Previous page
1/12
Next page
Switch action
yove
the reversing switch lever to the
W
position for clockwise rotation or the
Tool
speed is increased by increasing pres-
sure
on
the trigger. To start the
tool,
simply
pull the trigger. Release the trigger
to
stop.
When the reversing switch lever is in the
neutral position, the
tool
will not start even
if
you pull the trigger.
position for counter-clockwise.
CAUTION
:
0
Before inserting the battery cartridge into the tool, always check to
see
that the trigger
0
Always check the direction of rotation before drilling.
0
Use the reversing switch lever only when the tool comes to
a
complete stop. Changing
When not operating the tool, keep the reversing switch lever in the neutral position.
switch actuates properly and returns to the
"OFF"
position when released.
the direction of rotation before the tool stops may ruin the tool.
Hammer drilling operation
Position the bit
at
the location for the
hole, then pull the trigger.
Do
not force the tool. Light pressure
gives
best results. Keep the tool in position and
prevent
it
from slipping away from the
hole.
Do
not apply more pressure when the hole
becomes clogged with chips or particles.
Instead, run the tool
at
an idle, then
re-
move from the hole.
By
repeating this
several times, the hole will be cleaned out.
Drilling operation
0
Drilling in wood
When drilling in wood, best results are obtained with wood drills equipped with
a
guide
screw. The guide screw makes drilling easier by pulling the bit into the workpiece.
0
Drilling in metal
To
prevent the bit from slipping when starting
a
hole, make an indentation with
a
center-
punch and hammer
at
the point to be drilled.
Place
the point of the bit in the indenta-
tion and
start
drilling.
Use
a
cutting lubricant when drilling metals. The exceptions are iron and brass which
should be drilled dry.
8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita 8402VDW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita 8402VDW in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info