78677
10
Zoom out
Zoom in
Previous page
1/16
Next page
30
Phillips bit
Embout Phillips
Kreuzschlitz-Schraubendrehereinsatz
Punta a croce
Phillips schroefbit
Pieza de apriete de punta Phillips
Broca Phillips
Phillips bit
Korsmejsel
Phillips-bits
Ristipääterä
Αιχµή Φίλιπς
Phillips bit
Embout Phillips
Kreuzschlitz-Schraubendrehereinsatz
Punta a croce
Phillips schroefbit
Pieza de apriete de punta Phillips
Broca Phillips
Phillips bit
Korsmejsel
Phillips-bits
Ristipääterä
Αιχµή Φίλιπς
Note:
Use bit No. 2 when fastening machine screws M4M5, or wood screws 3.1mm4.8mm.
Use bit No. 3 when fastening machine screws M6M8, or wood screws 5.1mm6.1mm.
Note :
Utilisez l’embout No. 2 pour visser des vis à métaux M4 M5, ou des vis en bois de 3,1 mm 4,8mm.
Utilisez l’embout No. 3 pour visser des vis à métaux M6 M8, ou des vis en bois de 5,1 mm 6,1mm.
Hinweis:
Einsatzwerkzeug Nr. 2 zum Verschrauben von Maschinenschrauben M4 bis M5 oder Holzschrauben 3,1 mm bis
4,8 mm verwenden.
Einsatzwerkzeug Nr. 3 zum Verschrauben von Maschinenschrauben M6 bis M8 oder Holzschrauben 5,1 mm bis
6,1 mm verwenden.
Note:
Usare la punta No. 2 per stringere le viti comuni M4 M5 o le viti per legno da 3,1 mm a 4,8 mm.
Usare la punta No. 3 per stringere le viti comuni M6 M8 o le viti per legno da 5,1 mm a 6,1 mm.
Opmerking:
Gebruik schroefbit Nr. 2 voor het vastdraaien van kolomschroeven M4 M5 of houtschroeven
3,1mm–4,8mm.
Gebruik schroefbit Nr. 3 voor het vastdraaien van kolomschroeven M6 M8 of houtschroeven
5,1mm–6,1mm.
Nota:
Emplee el implemento N.°2 cuando vaya a apretar tornillos para máquina M4 M5, o tornillos para madera de
3,1mm 4,8mm de diámetro.
Emplee el implemento N.°3 cuando vaya a apretar tornillos para máquina M6 M8, o tornillos para madera de
5,1mm 6,1mm de diámetro.
Nota:
Utilize a broca N. 2 quando aperta parafusos de rosca fina M4 M5, ou parafusos de madeira de
3,1mm–4,8mm.
Utilize a broca N. 3 quando aperta parafusos de rosca fina M6 M8, ou parafusos de madeira de
5,1mm–6,1mm.
Bemærk:
Anvend bit nr. 2 til fastspænding af maskinskruer M4 M5, eller træskruer 3,1 mm 4,8 mm.
Anvend bit nr. 3 til fastspænding af maskinskruer M6 M8, eller træskruer 5,1 mm 6,1 mm.
Bit
No.
L (mm)
No. 2 45 65 110 150 250
No. 3 45 65 110
Bit No. L (mm) D (mm) d (mm)
No. 2 82 6 5
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita 6827 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita 6827 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info