Manual Makita 6824k (page 5 of 7) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

381189

Zoom out

Zoom in

1/7

Reversing switch action (Fig. 7)

CAUTION:

• Always check the direction of rotation before opration.

• Use the reversing switch only after the tool comes to a

complete stop. Charging the direction of rotation before

the tool stops may damage the tool.

This tool has a reversing switch to change the direction of

rotation. Move the reversing switch lever to the “A” side

for clockwise rotation or the “B” side for counterclockwise

rotation.

Operation

Fit the screw on the point of the bit and place the point of

the screw on the surface of the workpiece to be fastened.

Apply presssure to the tool and start it. Withdraw the tool

as soon as the clutch cuts in. Then release the trigger.

CAUTION:

• When fitting the screw onto the point of the bit, be care-

ful not to push in on the screw. If the screw is pushed

in, the clutch will engage and the screw will rotate sud-

denly. This could damage a workpeice or cause an

injury.

• Make sure that the bit is inserted straight in the screw

head, or the screw and/or bit may be damaged.

Hook (Fig.9 &10)

The hook is convenient for temporarily hanging the tool.

When using the hook, pull it out in “A” direction and then

push it in B direction to secure in place.

When not using the hook, return it back to its initial posi-

tion by following the above procedures in reverse.

How to install and remove the Removable Cord

Adapter

Important:

Always be sure that the tool is switched off and

unplugged before removing or installing the Removable

Cord Adapter.

How to install and remove the Removable Cord

Adapter

Important:

Always be sure that the tool is switched off and

unplugged before removing or installing the Removable

Cord Adapter.

How to install

Insert the Removable Cord Adapter as far as it goes so

that the marking on an end of the Removable Cord

Adapter on the side of connecting to power supply cord is

aligned to the marking on the other end of the

Removable Cord Adapter on the side of connecting to the

tool. (Fig. 11)

Turn the Removable Cord Adapter clockwise until it is

locked with a lock button. (Fig. 12)

And at this time the marking on an end of the

Removable Cord Adapter on the side of power supply

cord is aligned to the marking on the other end of the

Removable Cord Adapter on the side of connecting to the

tool. (Fig. 13)

How to remove

Rotate the Removable Cord Adapter counterclockwise

until it stops while pressing the lower part of the lock but-

ton. (Fig. 14)

Then pull the Removable Cord Adapter in that position.

(Fig. 15)

MAINTENANCE

CAUTION:

Always be sure that the tool is switched off and

unplugged before carrying out any work on the tool.

To maintain product safety and reliability, repairs, mainte-

nance or adjustment should be carried out by a Makita

Authorized Service Center.

ACCESSORIES

CAUTION:

• These accessories or attachments are recommended

for use with your Makita tool specified in this manual.

The use of any other accessories or attachments might

present a risk of injury to persons. Only use accessory

or attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita service center.

• Phillips insert bit 1-25, 2-25 and 3-25

• Magnetic bit holder 6.35-76 and 6.35-60

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita 6824k in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita 6824k Manual

Product: