Manual Makita 6305W (page 7 of 48) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

690964

Zoom out

Zoom in

1/48

NOTE:

• After the clamper is secured, the maximum travel of the

drill holder is 47 mm by pulling the grip upward.

(Fig. 16)

Positioning the drilling hole (Fig. 17)

Mark a sign lightly as a position of drilling a hole into the

workpiece by placing the drill bit tip on the surface of

workpiece so that it is located between the drill bit and the

shoe.

CAUTION:

• At this time, place the workpiece so that the shoe con-

tacts as great part of surface of the workpiece as possi-

ble.

Drilling operation

This tool is intended for drilling in metal.

Apply machine oil when drilling.

After determining the position of a hole, turn on the tool

and start drilling by pulling the grip upward.

CAUTION:

• Press the grip lightly and softly so that the number of

drill bit rotation is not lessened.

• Hold the tool firmly so that the drill bit is perpendicular

to the workpiece.

• There is a tremendous twisting force exerted on the

tool/bit at the time of hole breakthrough. Reduce your

force applied on the grip by pulling it more lightly and

exert care when the bit begins to break through the

workpiece.

MAINTENANCE

CAUTION:

• Always be sure that the tool is switched off and

unplugged before attempting to perform inspection or

maintenance.

Replacing carbon brushes

Remove and check the carbon brushes regularly. Replace

when they wear down to the limit mark. Keep the carbon

brushes clean and free to slip in the holders. Both carbon

brushes should be replaced at the same time. Use only

identical carbon brushes. (Fig. 18)

Use a screwdriver to remove the brush holder caps. Take

out the worn carbon brushes, insert the new ones and

secure the brush holder caps. (Fig. 19)

To maintain product SAFETY and RELIABILITY, repairs,

any other maintenance or adjustment should be per-

formed by Makita Authorized Service Centers, always

using Makita replacement parts.

ACCESSORIES

CAUTION:

• These accessories or attachments are recommended

for use with your Makita tool specified in this manual.

The use of any other accessories or attachments might

present a risk of injury to persons. Only use accessory

or attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita Service Center.

• Drill bits

• Chuck key

• Grip assembly

• Borer attachment

• Lever

• Stand base

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita 6305W in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita 6305W Manual

Product: