382525
5
Zoom out
Zoom in
Previous page
1/13
Next page
GB
Circular Saw Instruction Manual
F
Scie circulaire Manuel d’instructions
D
Handkreissäge Betriebsanleitung
I
Sega circolare Istruzioni d’uso
NL
Cirkelzaagmachine Gebruiksaanwijzing
E
Sierra circular Manual de instrucciones
P
Serra circular Manual de instruço˜es
DK
Rundsav Brugsanvisning
S
Cirkelsåg Bruksanvisning
N
Sirkelsag Bruksanvisning
SF
Pyörösahat Käyttöohje
GR
¢ÈÛÎÔÚ›ÔÓÔ √‰ËÁ›Â˜ ¯Ú‹Ûˆ˜
165 mm 5603R
190 mm 5703R
235 mm 5903R
270 mm 5103R
355 mm 5143R
5603R-5143R (cover) (’99. 6. 14)
Symbols
The following show the symbols used for the machine. Be sure that you understand their meaning before use.
Symboles
Nous donnons ci-dessous les symboles utilisés pour l’outil. Assurez-vous que vous en avez bien compris la
signification avant d’utiliser l’outil.
Symbole
Die folgenden Symbole werden für die Maschine verwendet. Machen Sie sich vor der Benutzung unbedingt mit
ihrer Bedeutung vertraut.
Symboli
Per questo utensile vengono usati i simboli seguenti. Bisogna capire il loro significato prima di usare l’utensile.
Symbolen
Voor dit gereedschap worden de volgende symbolen gebruikt. Zorg ervoor dat u de betekenis van deze
symbolen begrijpt alvorens het gereedschap te gebruiken.
Símbolos
A continuación se muestran los símbolos utilizados con esta herramienta. Asegúrese de que entiende su
significado antes de usarla.
Símbolos
O seguinte mostra os símbolos utilizados para a ferramenta. Certifique-se de que compreende o seu
significado antes da utilização.
Symboler
Nedenstående symboler er anvendt i forbindelse med denne maskine. Vær sikker på, at De har forstået
symbolernes betydning, før maskinen anvendes.
Symboler
Det följande visar de symboler som används för den här maskinen. Se noga till att du förstår deras innebörd
innan maskinen används.
Symbolene
Følgende viser de symblene som brukes for maskinen. Det er viktig å forstå betydningen av disse før maskinen
tas i bruk.
Symbolit
Alla on esitetty koneessa käytetyt symbolit. Opettele näiden merkitys, ennen kuin käytät konetta.
™‡Ì‚ÔÏ·
∆· ·ÎfiÏÔ˘ı· ‰Â›¯ÓÔ˘Ó Ù· ۇ̂ÔÏ· Ô˘ ¯ÚËÛÈÌÔÔÈÔ‡ÓÙ·È ÁÈ· ÙÔ Ì˯¿ÓËÌ·. µÂ‚·Èˆı›Ù fiÙÈ
ηٷϷ‚·›ÓÂÙ ÙË ÛËÌ·Û›· ÙÔ˘˜ ÚÈÓ ·fi ÙË ¯Ú‹ÛË.
[ Read instruction manual.
[ Lire le mode d’emploi.
[ Bitte Bedienungsanleitung lesen.
[ Leggete il manuale di istruzioni.
[ Lees de gebruiksaanwijzing.
[ Lea el manual de instrucciones.
[ Leia o manual de instruço˜es.
[ Læs brugsanvisningen.
[ Läs bruksanvisningen.
[ Les bruksanvisingen.
[ Katso käyttöohjeita.
[ ¢È·‚¿ÛÙ ÙȘ Ô‰ËÁ›Â˜ ¯Ú‹Û˘.
[ DOUBLE INSULATION
[ DOUBLE ISOLATION
[ DOPPELT SCHUTZISOLIERT
[ DOPPIO ISOLAMENTO
[ DUBBELE ISOLATIE
[ DOBLE AISLAMIENTO
[ DUPLO ISOLAMENTO
[ DOBBELT ISOLERET
[ DUBBEL ISOLERING
[ DOBBEL ISOLERING
[ KAKSINKERTAINEN ERISTYS
[ ¢π¶§∏ ª√¡ø™∏
5604R (illust) (’99. 6. 10)
5
ENGLISH
Explanation of general view
1 Hex wrench
2 Shaft lock
3 Tighten
4 Loosen
5 Saw blade
6 Outer flange
7 Inner flange
8 Outer flange
9 Hex socket head bolt
0 Saw blade
q Setting protuberances
w Hex socket head bolt
(For adjusting riving knife)
e Cutting depth
r Loosen
t Lever
y Thumb nut
u For 45° bevel cuts
i For straight cuts
o Base plate
p 45° angle cuts
a Straight cuts
s Top guide
d Base
f 60° angle cuts
g 45° angle cuts
h 30° angle cuts
j Straight cuts
k Blade
l Base
; Top guide
z Lock-off button
x Switch trigger
c Vacuum cleaner
v Limit mark
b Brush holder cap
n Screwdriver
SPECIFICATIONS
Model 5603R 5703R 5903R 5103R 5143R
Blade diameter .................................................... 165 mm 190 mm 235 mm 270 mm 355 mm
Max. cutting depth
At 90° ............................................................... 54 mm 66 mm 85 mm 100 mm 130 mm
At 45° ............................................................... 38 mm 46 mm 64 mm 73 mm 90 mm
No load speed (RPM) ......................................... 5,000 4,800 4,500 3,800 2,700
Overall length ...................................................... 330 mm 356 mm 400 mm 442 mm 607 mm
Net weight ........................................................... 4.2 kg 5.2 kg 7.6 kg 9.4 kg 14.5 kg
Due to our continuing program of research and
development, the specifications herein are subject
to change without notice.
Note: Specifications may differ from country to
country.
Power supply
The machine should be connected only to a power
supply of the same voltage as indicated on the
nameplate, and can only be operated on single-phase
AC supply. They are double-insulated in accordance
with European Standard and can, therefore, also be
used from sockets without earth wire.
Safety hints
For your own safety, please refer to the enclosed
Safety instructions.
ADDITIONAL SAFETY RULES
1. Wear hearing protection.
2. Keep Guards In Place and In Working Order.
Never wedge or tie lower guard open. Check
operation of lower guard before each use.
Don’t use if lower guard does not close briskly
over saw blade.
CAUTION: If saw is dropped, lower guard may
be bent, restricting full return.
3. Do not use blades which are deformed or
cracked.
4. Do not use blades of high speed steel.
5. Do not stop the blades by lateral pressure on
the saw blade.
6. Keep Blades Clean and Sharp.
Sharp blades minimize stalling and kickback.
7. DANGER: Keep Hands Away From Cutting
Area. Keep hands away from blades. Don’t
reach underneath work while blade is rotating.
Don’t attempt to remove cut material when
blade is moving.
CAUTION: Blades coast after turn off.
8. Support Large Panels.
Large panels must be supported as shown in
Fig. A to minimize the risk of blade pinching
and kickback.
When cutting operation requires the resting of
the saw on the work piece, the saw shall be
rested on the larger portion and the smaller
piece cut off.
To avoid kickback, do support board or panel
near the cut.
Fig. A
Don’t support board or panel away from the cut.
Fig. B
6
5603R 5413R (E) (’99. 6. 11)
17. Never attempt to saw with the circular saw
held upside down in a vise. This is extremely
dangerous and can lead to serious accidents.
Fig. G
18. Before setting the tool down after completing
a cut, be sure that the lower (telescoping)
guard has closed and the blade has come to a
complete stop.
SAVE THESE INSTRUCTIONS.
OPERATING INSTRUCTIONS
Removing or installing saw blade
The following blade can be used with this tool.
Model Max. dia. Min. dia. Blade thickness Kerf
5603R 165 mm 150 mm 1.6 mm or less 1.9 mm or more
5703R 190 mm 170 mm 1.6 mm or less 1.9 mm or more
5903R 235 mm 210 mm 1.7 mm or less 2.1 mm or more
5103R 270 mm 260 mm 1.8 mm or less 2.2 mm or more
5143R 355 mm 350 mm 2.3 mm or less 2.7 mm or more
The thickness of the riving knife is 1.8 mm for Models
5603R and 5703R or 2.0 mm for Models for 5903R
and 5103R or 2.5 mm for Model 5143R.
CAUTION:
Do not use saw blades which do not comply with the
characteristics specified in these instructions.
Do not use saw blades the disc of which is thicker or
the set of which is smaller than the thickness of the
riving knife.
To remove the saw blade, depress the shaft lock fully
to prevent shaft rotation, then use the hex wrench to
loosen the hex socket head bolt. (Fig. 1)
Now remove the outer flange, raise the safety cover
as much as possible, and remove the saw blade.
(Fig. 2)
Install the saw blade using the reverse of the removal
procedure. Install the inner flange, saw blade, outer
flange and hex socket head bolt, in that order. Be sure
to secure the hex socket head bolt tightly with the
shaft lock fully depressed. (Fig.1&3)
CAUTION:
Make sure that the blade teeth point forward in the
same direction as the tool rotation (the arrow on the
blade should point in the same direction as the
arrow on the tool).
Never depress the shaft lock while the saw is
running.
Use only the Makita socket wrench to remove or
install the blade.
Riving knife adjustment (Fig. 4)
Use the socket wrench to loosen the hex head socket
bolt for the riving knife adjustment, then raise the
safety cover. Move the riving knife up or down over
the two protuberances for settings indicated in the
illustration, so as to obtain the proper clearance
between the riving knife and saw blade.
CAUTION:
Ensure that the riving knife is adjusted such that:
The distance between the riving knife and the toothed
rim of the saw blade is not more than 5 mm.
The toothed rim does not extend more than 5 mm
beyond the lower edge of the riving knife.
Adjusting depth of cut (Fig. 5)
Loosen the lever on the depth guide and move the
base up or down. At a desired depth of cut, secure the
base by tightening the lever.
CAUTION:
Use a shallow depth of cut when cutting thin work-
piece for cleaner, safer cuts.
After adjusting the depth of cut, always tighten the
lever securely.
8
5603R 5413R (E) (’99. 6. 14)
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita 5103r at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita 5103r in the language / languages: English, German, Dutch, Danish, French, Italian, Norwegian as an attachment in your email.

The manual is 0,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info