Manual Makita 447 M (page 7 of 164) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish)

690942

Zoom out

Zoom in

1/164

MAKITA 447 M

english

When dust removers are used,

the rate at which air is ex-

changed in the room must be

adequate if the exhaust air from

the vacuum cleaner is blown into

the room (please observe regu-

lations valid in your country).

Before starting work, the operat-

ing staff must be informed on

– use of the vacuum cleaner

– risks associated with the ma-

terial to be picked up

– safe disposal of the picked

up material.

Precautions and safety

regulations when using the

vacuum cleaner

Before start-up

Inspect power cord regularly to

detect signs of damage, e.g.

cracks or ageing.

If the power cord is damaged, it

must be replaced by the Service

or an electrician to avoid danger

before use of the vacuum clean-

er is continued.

Use only the type of power cord

specified in the operating man-

ual.

Do not damage the power cord

(e.g. by moving over it or pulling

or crushing it).

Disconnect the power cord by

pulling the plug only (do not pull

or tug the power cord).

Inspect the vacuum cleaners to

ensure that they are in proper

condition. Plugs and couplings

in power cords must at least

have splash protection.

Never use the vacuum cleaner

if the filter element is damaged.

Picking up liquids

If foam develops or liquid

emerges, stop work immediately

and empty the dirt tank.

Regularly clean the built in level

indicator hose to limit the wa-

ter level and check that it is not

damaged.

See section 5 for information on

handling liquids and (hazard-

ous) dust.

Electrical components

Check the rated voltage of the

vacuum cleaner before con-

necting it to the mains supply

system. Ensure that the voltage

shown on the rating plate corre-

sponds to the voltage of the lo-

cal mains power supply.

If you are using an extension

cord, use only those specified

by the manufacturer or higher

quality ones (see section 9.4

„Technical data“).

It is recommended that the vac-

uum cleaner should be connect-

ed via a residual current circuit

breaker. This stops the supply

of electricity if the leakage cur-

rent to earth exceeds 30 mA for

30 ms or it has an earth tester

circuit.

When using an extension lead,

check the minimum cross-sec-

tions of the cable:

Cable length

Cross section

<16 A <25 A

up to 20 m

ø1.5mm² ø2.5mm²

20 to 50 m

ø2.5mm² ø4.0mm²

Arrange the electrical parts

(sockets, plugs and couplings)

and lay down the extension lead

so that the protection class is

maintained.

Never spray water on to the

upper section of the vacuum

cleaner. Danger for persons,

risk or short-circuiting.

Observe the latest edition of the

IEC regulations.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita 447 M in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 8,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita 447 M Manual

Product: