75889

Makita 446 L Manual

14
Zoom out
Zoom in
Previous page
1/100
Next page
MAKITA 446 L
10
english
7.2.3 Replacing the filter
element
1. Remove the upper section of
the cleaner from the dirt tank
and deposit with the filter
element facing upwards. Do
not place the upper section
of the cleaner on the guard
(1).
2. Turn the filter holder anti-
clockwise (2) and remove it
(3).
3. Carefully remove the filter
element.
4. Clean the filter seal (4).
Check it for damage and
replace if necessary.
5. Check antistatic clamp (5)
for damage and have it
replaced by Makita Service
if necessary.
6. Check the floater (6) for
proper operation: When
you turn the filter holder, the
floater should move back
and forth easily.
7. Fit a new filter element.
8. Fit the filter holder and turn it
clockwise to secure it.
9. Dispose of the used filter
element in accordance with
legal regulations.
CAUTION!
Never use the vacuum clean-
er without a filter.
6
4
5
1
2
3
8 Troubleshooting
Fault
‡ Motor does not start > Fuse in mains plug has
blown.
> Overload protection switch
has tripped.
• Reset the fuse.
• Switch off the vacuum
cleaner and allow it to cool
for approx. 5 minutes. If it
can not be started again,
contact the Makita service
department.
‡ Motor does not run in auto-
matic mode
> Power tool is defective or not
connected properly.
• Check that the power tool
works or that the plug is
inserted correctly.
Cause
Remedy
During the following work,
ensure that dust is not unnec-
essarily spread around.
Wear a P2 breathing mask.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita 446 L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita 446 L in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info