Manual Makita 4105 KB (page 4 of 12) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

448193

Zoom out

Zoom in

1/12

ENGLISH

Explanation of general view

1 Blade cover

2 Wrench

3 Diamond wheel

4 Outer flange

5 Socket wrench

6 Tighten

7 Loosen

8 Inner flange

9 Hex bolt

0 Wing nut

q Base

w Dust spout

e Switch trigger

r Restart button

t Limit mark

y Brush holder cap

u Screwdriver

SPECIFICATIONS

Model 4105KB

Blade diameter ............................................. 125 mm

Max. cutting capacity ..................................... 40 mm

No load speed (RPM) ...................................... 7,500

Overall length ............................................... 230 mm

Net weight ....................................................... 3.2 kg

•

Due to the continuing program of research and

development, the specifications herein are subject

to change without prior notice.

•

Note: Specifications may differ from country to

country.

Power supply

The machine should be connected only to a power

supply of the same voltage as indicated on the

nameplate, and can only be operated on single-phase

AC supply. They are double-insulated in accordance

with European Standard and can, therefore, also be

used from sockets without earth wire.

Safety hints

For your own safety, please refer to enclosed safety

instructions.

These symbols mean:

Read instruction manual.

DOUBLE INSULATION

ADDITIONAL SAFETY RULES

1. Check the wheel carefully for cracks or dam-

age before operation. Replace cracked or

damaged wheel immediately.

2. Use only flanges specified for this machine.

3. Be careful not to damage the spindle, flanges

(especially the installing surface) or bolt. Dam-

age to these parts could result in wheel break-

age.

4. Hold the machine firmly.

5. Keep hands away from rotating parts.

6. Make sure the wheel is not contacting the

workpiece before the switch is turned on.

7. Wait until the wheel attains full speed before

cutting.

8. Stop operation immediately if you notice any-

thing abnormal.

9. Do not attempt to lock the trigger in the ‘‘ON’’

position.

10. Never attempt to cut with the machine held

upside down in a vise. This can lead to serious

accidents, because it is extremely dangerous.

(Fig. 1)

11. Before setting the machine down after com-

pleting a cut, be sure that the wheel has come

to a complete stop.

SAVE THESE INSTRUCTIONS.

OPERATING INSTRUCTIONS

Removing or installing diamond wheel

(Fig. 2,3&4)

Important:

Always be sure that the machine is switched off and

unplugged before removing or installing the wheel.

Remove the blade cover.

Hold the outer flange with the wrench and loosen the

hex bolt clockwise with the socket wrench. Then

remove the hex bolt, outer flange and wheel.

To install the wheel, follow the removal procedure in

reverse.

BE SURE TO TIGHTEN THE HEX BOLT SECURELY.

CAUTION:

Use only the Makita wrench and socket wrench to

install or remove the wheel.

Adjusting depth of cut (Fig. 5)

Loosen the wing nut on the depth guide and move the

base up or down. At the desired depth of cut, secure

the base by tightening the wing nut.

CAUTION:

After adjusting the depth of cut, always tighten the

wing nut securely.

Dust bag (Fig. 6)

The use of the dust bag makes cutting operations

clean and dust collection easy. To attach the dust bag,

fit it onto the dust spout. When the dust bag is about

one-third full, remove the dust bag from the machine

and pull the fastener out. Empty the dust bag of its

contents, tapping it lightly so as to remove particles

adhering to the insides which might hamper collec-

tion.

Sighting (Fig. 7)

Align the notch in the front of the base with your

cutting line on the workpiece.

4105KB (E) (’97. 5. 30)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita 4105 KB in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita 4105 KB Manual

Product: