Manual Makita 4033D (page 7 of 44) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

690944

Zoom out

Zoom in

1/44

6. Do not short the battery cartridge:

(1) Do not touch the terminals with any conduc-

tive material.

(2) Avoid storing battery cartridge in a container

with other metal objects such as nails, coins,

etc.

(3) Do not expose battery cartridge to water or

rain.

A battery short can cause a large current flow,

overheating, possible burns and even a break-

down.

7. Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50°C (122°F).

8. Do not incinerate the battery cartridge even if it

is severely damaged or is completely worn out.

The battery cartridge can explode in a fire.

9. Be careful not to drop or strike battery.

SAVE THESE INSTRUCTIONS.

Tips for maintaining maximum battery life

1. Charge the battery cartridge before completely

discharged.

Always stop tool operation and charge the bat-

tery cartridge when you notice less tool power.

2. Never recharge a fully charged battery cartridge.

Overcharging shortens the battery service life.

3. Charge the battery cartridge with room tempera-

ture at 10°C – 40°C (50°F – 104°F). Let a hot bat-

tery cartridge cool down before charging it.

4. Charge the Nickel Metal Hydride battery car-

tridge when you do not use it for more than six

months.

OPERATING INSTRUCTIONS

Installing or removing battery cartridge (Fig. 1)

• Always switch off the cleaner before insertion or

removal of the battery cartridge.

• To remove the battery cartridge, withdraw it from the

cleaner while pressing the buttons on both sides of the

cartridge.

• To insert the battery cartridge, align the tongue on the

battery cartridge with the groove in the housing and slip

it into place. Always insert it all the way until it locks in

place with a little click. If not, it may accidentally fall out

of the cleaner, causing injury to you or someone

around you.

• Do not use force when inserting the battery cartridge. If

the cartridge does not slide in easily, it is not being

inserted correctly.

Installing set plate (optional accessory) for 4013D

only (Fig. 2)

Always install the set plate when using battery cartridges

1200, 1202 or 1202A. Install the set plate on the cleaner

with the screw provided.

Charging

Charge the battery cartridge with your Makita charger

properly before use.

Following batteries can be used for this cleaner;

Switch action (Fig. 3)

CAUTION:

• Always be sure that the dust bag or paper pack is

installed properly in the cleaner before use. Improper

installation may allow dust to enter the motor, resulting

in malfunction of the cleaner.

• Always switch off the cleaner after each use to prevent

damage to the cleaner and to lengthen the service life

of the batteries.

To start the cleaner, slide the switch lever forward to the

“ I ” position.

To stop the cleaner, slide the switch lever back to the

“ O ” position.

Dust disposal

CAUTION:

Empty the cleaner before it becomes too full, or the suc-

tion force weakens.

Depress the buttons and open the front cover. (Fig. 4)

Take the dust bag out of the cleaner carefully so that the

contents will not spill out. Empty the contents out of the

dust bag. (Fig. 5)

Also empty out the dust inside the cleaner itself. Failure

to do so may cause the sponge filter to be clogged or the

motor to be damaged. (Fig. 6)

Installing dust bag

Place the dust bag into the cleaner cavity. (Fig. 7)

Insert the holder of the dust bag all the way into the slots

in the cleaner cavity. (Fig. 8)

CAUTION:

Forgetting to install the dust bag, failure to insert the

holder of the dust bag all the way into the slots or using a

broken or ripped bag, may allow dust to get into the

motor. This may result in motor failure.

Hook the front cover onto the front lip of the cleaner.

Then close the front cover. (Fig.9)

NOTE:

• When installing the paper filter, follow the same proce-

dures for the dust bag.

• Always unfold a new paper filter before installing it on

the cleaner.

Model Battery type

Capacity

(mAh)

Number

of cells

4013D

1200, 1220 1300 10

1202, 1222, 1202A 2000 10

1234 2600 10

1235, 1235A 3000 10

4033D

1420 1300 12

1422 2000 12

1434 2600 12

1435 3000 12

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita 4033D in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita 4033D Manual

Product: