Manual Makita 2704 (page 15 of 27) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

448181

Zoom out

Zoom in

1/27

Lubrication

To keep the table saw in tip-top running condition, and to

assure maximum service life, oil or grease the moving

parts and rotating parts from time to time.

Lubrication places:

• Threaded shaft to elevate the blade

• Hinge to rotate the frame

• Elevation guide shafts on motor

• Gear to elevate the blade

• Guide rails for the rip fence

• Shaft of the sub table (R) locking levers

• Sliding part of the sub table (R)

Replacing carbon brushes

Remove and check the carbon brushes regularly. Replace

when they wear down to the limit mark. Keep the carbon

brushes clean and free to slip in the holders. Both carbon

brushes should be replaced at the same time. Use only

identical carbon brushes. (Fig. 47)

Use a screwdriver to remove the brush holder caps. To

replace the carbon brushes, remove the blade guard and

blade and then loosen the lock lever, tilt the saw head and

secure it at 45° bevel angle. Carefully lay the tool on itself

backward. Then loosen the brush holder cap. Remove the

worn carbon brushes, insert the new ones and secure the

brush holder caps. (Fig. 48)

To maintain product SAFETY and RELIABILITY, repairs,

any other maintenance or adjustment should be per-

formed by Makita Authorized Service Centers, always

using Makita replacement parts.

ACCESSORIES

CAUTION:

• These accessories or attachments are recommended

for use with your Makita tool specified in this manual.

The use of any other accessories or attachments might

present a risk of injury to persons. Only use accessory

or attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita service center.

• Table stand set (accessory)

Refer to the instruction manual for table saw stand that

is provided with the table saw stand as an optional

accessory.

• Steel & Carbide-tipped saw blades

• Sub table (L)

• Sub table (back)

• Rip fence

• Miter gauge

• Offset wrench 13 – 22

• Wrench 19

• Hex wrench 5

• Joint (for connecting to dust collector)

• Auxiliary plate

• Stand set

• Sliding guide

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita 2704 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita 2704 Manual

Product: