Manual Makita 2012 NB (page 9 of 56) (English, German, Dutch, Danish, French, Italian, Portuguese, Spanish)

448175

Zoom out

Zoom in

1/56

Changing type of blade

This tool can accept either throw away blades or standard blades. If you wish to change the type of blade, buy and use

the following parts.

Hood set (Fig. 17)

When you wish to maintain clean operations through easy dust collection, connect the vacuum cleaner to the thick-

nesser using this hood.

Loosen the thumb screws which secure the chip cover. Attach the hood to the thicknesser and secure the chip cover

and the hood together by tightening the thumb screws.

CAUTION:

• When installing the hood set, make sure that the chain is not caught by the chip cover or hood set. (Fig. 18)

OPERATION

CAUTION:

• Two or more pieces of narrow but similar thickness stock can be passed through the thicknesser side by side. How-

ever, allow some spacing between the stock to permit the feed rollers to grip the thinnest piece of stock. Otherwise, a

slightly thinner piece could be kicked back by the cutterhead.

Place the workpiece flat on the table top.

Determine the depth of cut as described before.

Switch on the tool and wait until the blades attain full speed. The workpiece should not be in contact with the feed roller

when you turn the tool on.

Then insert the workpiece flush with the table top.

When cutting a long or heavy workpiece, lift up its end slightly at the start and the end of the cut to avoid gouging or

snipping at the extreme ends of the workpiece. (Fig. 19)

The use of the tool top enables quick, effortless return of the workpiece to the infeed table side. This is especially con-

venient with two operators. (Fig. 20)

CAUTION:

• The workpiece with the following dimensions cannot be fed into the tool because the interval between two feed roll-

ers is 129 mm. Do not try to cut them.

• Stop the tool when the workpiece has stalled. Allowing the tool to run with a stalled workpiece causes rapid wearing

of the feed rollers.

Changing from standard blade to throw-away blade Changing from throw-away blade to standard blade

Set plate 2 pcs. Set plate 2 pcs.

Throw-away blade (306 mm) 2 pcs. Pan head screw M 4 x 6 4 pcs.

Magnetic holder 2 pcs. Standard blade 2 pcs.

Blade gauge 1 pc.

1 Less than 130 mm long

2 Having a groove more than 130 mm wide

3 Having grooves at intervals of 130 mm wide

Less than 130 mm

More than 130 mm

130 mm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita 2012 NB in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita 2012 NB

Makita 2012 NB User Manual - English, Dutch - 17 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita 2012 NB Manual

Product: