Manual Makita 194093-8 (page 3 of 20) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

598728

Zoom out

Zoom in

1/20

ENGLISH

Explanation of general view

How to use

CAUTION

• Read and thoroughly understand this manual and the instruction manual of the tool you use before performing the fol-

lowing.

• Before installing a tool on this stand, always switch off and unplug the tool.

• The stand should be bolted in a stable and level surface using the bolts provided on two of four feet.

• Use only with Makita model indicated in the instruction manual.

• Use only the handle to avoid pinched fingers when raising or folding the stand.

• Before operating the tool, secure it to stand using bolts.

• Do not use the stand on uneven or unstable surface.

• Do not climb, sit or stand on the stand.

• When setting up the table saw stand in the upright position or folding it, be sure to securely keep pressing the pipe of

table saw stand with your foot until it locks.

• When storing table saw stand, never lean it against the wall or the like lengthwise or sideways.

• Never pull the lever without holding the handle.

Mount the table pipe on the table saw stand securely using the bolts (4 pcs.). (Fig. 1)

When securing table saw on the table saw stand, place it on the table saw stand so that the handle of stand is positioned

on the left side in the front view of the mounted saw and holes on your tool base match holes in the stand. Then tighten

hex bolts (4 positions) securely. (Fig. 2)

1. Place the table saw stand on a level location. When setting up the table saw stand in the upright position and grab the

handle firmly and stamp the pipe with your foot, pull the lever and raise the handle with your foot positioned on the pipe

and with the lever being pulled. When the table stand has reached one of the four positive stops in height, release the

lever while holding handle. After making sure that the lever has returned to its original position and the table stand is

securely locked, remove your hands from the handle and foot from the pipe. (Fig. 3)

2. Adjust the levelness of the table saw stand by rotating the feet (2 pcs.), and then secure the table saw stand by turning

the nuts (2 pcs.). (Fig. 3)

3. Secure the feet of stand to the stable and level surface using holes in the fix plates with two hex bolts. (Fig. 4)

4. To fold the table saw stand, stamp the pipe and raise the handle slightly, pull the lever with the handle slightly elevated

and it unlocks. (Fig. 4)

1. Table pipe

2. Bolts

3. Holes in your tool base

4. Holes in the stand

5. Bolt

6. Pipe

7. Lever

8. Handle

9. Feet

10. Nuts

11. Fix plates

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita 194093-8 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita 194093-8 Manual

Product: