Manual MakerBot Replicator 2X (page 91 of 116) (English)

534675

Zoom out

Zoom in

1/116

CUSTOMIZING A THING CONTINUED

91USING THE CUSTOMIZER

EXAMPLE OF CUSTOMIZING A THING

This section will walk you through the steps

to customize a thing with the Customizer

application, create the STL ﬁle, and

download the STL ﬁle. We will customize

the thing called Customizable Round Trays.

To customize this thing:

1. Go to go to http://www.thingiverse.com.

2. On the home page, use the Search ﬁeld

in the upper right. Search for “Round Trays”.

3. In the Search Results page, ﬁnd

“Customizable Round Trays by walter”.

Click on the name of the thing.

4. In the Thing page for the thing, click the

button Open in Customizer.

5. The Customizer page appears and

displays the thing “Customizable

Round Trays”.

6. In the Parameters tab, we can edit the

following parameters [Fig. 13.3]:

Tray Diameter: You can specify the

diameter of the tray. In our example, set the

tray diameter to 75.

Tray Height: You can specify the height of

the sides of the tray. In our example, set the

tray height to 50.

Tray Rounding: Speciﬁes the curvature of

the bottom of the tray.

In our example, set

the curvature to 3.

Tray Sidewall: Speciﬁes the thickness of

the vertical walls, in mm. In our example, set

the thickness to 1.2.

Fig. 13. 3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of MakerBot Replicator 2X in the language / languages: English as an attachment in your email.

The manual is 7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

MakerBot Replicator 2X Manual

Product: