534675

MakerBot Replicator 2X Manual

77
Zoom out
Zoom in
Previous page
1/116
Next page
QUALITY [Fig. 11.1]
The settings in the Quality tab aect the
strength and finish of printed objects. Each
Quality option aects particular sections of
an object and requires some understanding
of the composition of a 3D printed object.
The MakerBot Replicator 2X begins printing
your object by putting down several solid
layers. These initial layers are called the floor
of the object. If your object has a flat top,
or a section with a flat top, your MakerBot
Replicator 2X will print a similar set of solid
layers there. This top is called a roof.
The MakerBot Replicator 2X starts each new
layer of an object by printing some number of
outlines of that layer. These are called shells.
If there is more than one shell, the additional
shells will be nested inside the first one.
PRINT QUALITY
77ADVANCED PRINTING
ADVANCED OPTIONS
To use the settings under Advanced
Options, you must select one of
MakerWare’s base profiles (Low, Standard,
or High). When you change any of the
settings in Advanced Options, an asterisk
will appear next to the profile name
everywhere it appears in the Make dialog.
The asterisk indicates that the base profile
is no longer in its default state.
NOTE: The settings in Advanced Options never
edit the base profiles; they only override them.
MakerWare will save the set of overrides for you, but
you can always return the profile to its original state
by clicking the Use Defaults button at the lower le
of the Advanced Options area.
These options provide control over specific
slicing options. To access the advanced
options, click the Advanced Options button
at the lower le of the Make dialog. This
button toggles the visibility of the advanced
options, which are grouped into three tabs :
Quality, Temperature and Speed.
To change a setting in the Advanced
Options tabs, highlight the current number
and enter a new one.
Fig. 11. 1
… 77 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MakerBot Replicator 2X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MakerBot Replicator 2X in the language / languages: English as an attachment in your email.

The manual is 7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info