534675

MakerBot Replicator 2X Manual

60
Zoom out
Zoom in
Previous page
1/116
Next page
ADDING AN OBJECT TO THE PLATE
In this section, we will add a second object
to the plate.
Currently, you should have the Flatiron
model at the le side of your build plate.
1. Click the Add button.
2. Navigate to the location of the file
Woolworth.stl and select that file.
Now you should see both the Flatiron
Building and the Woolworth Building models
on the plate in MakerWare.
You can manipulate the models on the plate
separately or together.
MANIPULATING MULTIPLE OBJECTS
1. To manipulate one object, select only that
object. For example:
• Select the Flatiron model.
• Click the Turn button.
• Hold down the le mouse button and
use your mouse to rotate the object.
Notice that only the selected object, the
Flatiron Building model, rotates.
2. If you select more than one object,
you can apply the Move function, Turn
function or Scale function to those
objects simultaneously. For example:
• Select the Flatiron Building.
• Hold down the Shi key and select the
Woolworth Building. Then release the
Shi key. Both models should be selected.
• Select the Turn button.
• Hold down the le mouse button and
drag to rotate the models. Notice that
both objects rotate.
SCALING AN OBJECT
In this section, we will scale our two models.
Currently, you should have the Flatiron and
Woolworth models on your plate.
1. Select the Flatiron model.
2. To scale the Flatiron model:
• Click the Scale button.
• Hold down the le mouse button
and drag to change the scale of
the object.
• Click on the Scale button a second time
or press the S key to view the Change
Dimensions submenu.
3. Click Reset Scale to return the Flatiron
model to its original scale.
4. Select the Flatiron model, hold down the
Shi key and then select the Woolworth
model. Both objects should now be selected.
5. Use the Scale button to change the scale.
Notice that both objects are re-scaled
simultaneously, while maintaining the
relative scale.
ADDING AND SCALING OBJECTS
60
… 60 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MakerBot Replicator 2X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MakerBot Replicator 2X in the language / languages: English as an attachment in your email.

The manual is 7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info