Manual MakerBot Replicator 2 - MB1036 (page 26 of 60) (English)

534674

Zoom out

Zoom in

1/60

Push down on the Extruder Arm.

Continue to hold it down as you insert the

free end of the ﬁlament into the hole in the

top of the extruder. Push the ﬁlament in as

far as it will go. You will see plastic start to

emerge from the extruder nozzle.

Release the extruder arm.

Push the Filament into the Extruder

LOADING MAKERBOT PLA FILAMENT CONTINUED

C STARTUP PROCESS: LEVELING, LOADING, TESTING

The extruder motor will grab onto the

ﬁlament and continue to draw it in. Watch to

make sure plastic is still extruding from the

nozzle aer you release the extruder arm.

Then press the M button to stop extrusion.

NOTE: Don’t be surprised if the ﬁlament that

initially comes out of the nozzle is not the color

you expected. There’s probably some ﬁlament

inside the extruder le over from our testing

process at the MakerBot Factory. Wait until you

see the color that you loaded come out of the

nozzle before you press the M button.

Stop Extrusion

MB2020_REP2_UserManual_V4.indd 26 7/22/13 5:32 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of MakerBot Replicator 2 - MB1036 in the language / languages: English as an attachment in your email.

The manual is 3,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of MakerBot Replicator 2 - MB1036

MakerBot Replicator 2 - MB1036 User Manual - German - 45 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

MakerBot Replicator 2 - MB1036 Manual

Product: