637878
14
Zoom out
Zoom in
Previous page
1/34
Next page
ALARMS
MANUAL MODE
IGNITING PELLETS
Description:
Settings:
Description:
Settings:
Description:
Settings:
When ALARMS are set and reached, the Pellet Boss ® will
sound a LOUD beep, and the appropriate display screen will flash. The
alarm is programmed to sound for (10) ten minutes before it automatically
shuts off.
To end an active alarm, push any button on the Pellet Boss ®
control panel. To entirely shut off ALL audible ALARMS on the Pellet
Boss:
Push the UP ARROW button for (10) ten seconds until MAKGRILL Ver.
2.0 (or higher) is displayed.
Press the RIGHT ARROW button until you reach ALARM ENABLED.
Press the STAR button.
Use the UP or DOWN arrow button to select either ENABLED or
SILENT. Press the STAR button to accept.
Press and hold the UP ARROW button for (3) seconds to exit. The
screen reverts back to the SETPOINT temperature.
Manual Mode is designed as a back-up in case there is a
thermocouple failure. If your thermocouple stops working, the grill will not
be able to detect the actual grill temperature. Therefore, your MAK GRILL
will not function properly. In this case, the MANUAL MODE will allow you
to use your grill until you receive and install a replacement thermocouple.
To enable the MANUAL MODE, press and hold the STAR
button unit MANUAL SMOKE is displayed. Press the STAR button again.
The word SMOKE will begin flashing. Use the UP or DOWN ARROW
buttons to select from SMOKE (175 degrees), LOW (225 degrees),
MEDIUM (275 degrees), MEDHIGH (350 degrees) or HIGH (450+
degrees). Press the STAR button again to set your selected cooking
temperature. The setting selected will stop flashing and the grill will adjust
to the new set temperature. Note: Because there is no working
thermocouple, the screen will not show the grill temperature. To return to
the NORMAL MODE, press and hold the STAR button (3) seconds, or
turn the grill off.
This screen will display whenever the igniter rod is on.
Once the igniter has turned off, the screen will display the grill
temperature. The screen will also activate whenever the “auto relight
sequence” which initiates if the fire in the firepot has gone out. IGNITING
will show on the display screen, and the grill will repeat the lighting
sequence up to (3) three times before the Pellet Boss® shuts off the grill
and displays FLAME OUT, CHECK FIREPOT, CHECK HOPPER.
There are no user settings for this feature.
?
?
?
?
?
?
14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MAK GRILLS EP-380-1G - Pellet BBQ Smoker-Grill at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MAK GRILLS EP-380-1G - Pellet BBQ Smoker-Grill in the language / languages: English as an attachment in your email.

The manual is 2,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info