494202
18
Zoom out
Zoom in
Previous page
1/38
Next page
EN-18
Manual (Wired)
In the following cases, select “Manual”(wired) to set each setting as necessary.
- If a network connection could not be established when the setting was “Auto”(wired).
- When instructed by your Internet service provider to make specific settings in accordance with your network
environment.
1. Use [Í / Æ] to select “Network Setup” in the home menu, then press [OK].
2. At “IP Mode”, press [OK] , and set it to “Manual”, then press [OK]
.
Link Status :Link Up
MAC Address :
XX:XX:XX:XX:XX
IP Mode :Manual
IP Address :XX:XX:XX:XX:XX
Subnet Mask :XX:XX:XX:XX:XX
Default Gateway :XX:XX:XX:XX:XX
Primary DNS :XX:XX:XX:XX:XX
Secondary DNS :XX:XX:XX:XX:XX
Wired IP Settings
...
Cancel Network TestApply
Please choose a new IP Mode value
Manual
Auto
3. Use [Î / ï] to select “IP Address”, then press [OK].
4. The IP address setting screen will appear. Enter an IP address
using
[Î / ï / Í / Æ]
on the software keyboard,
then select “Done”, then press [OK]
.
Link Status :Link Up
MAC Address :
XX:XX:XX:XX:XX
IP Mode :Manual
IP Address :
XX:XX:XX:XX:XX
Subnet Mask :
XX:XX:XX:XX:XX
Default Gateway :
XX:XX:XX:XX:XX
Primary DNS :XX:XX:XX:XX:XX
Secondary DNS :XX:XX:XX:XX:XX
Wired IP Settings
Please enter a new IP Address.
Valid range of each segment is 0 to 225.
Current Value xxx.xxx.x.xxx
New Value . . .
Cancel Network TestApply
1234567890
asdfghjkl ;
zx
Space
cvbnm, . /
-=\[]'`
q
Done
we r
y
uo
p
The software keyboard shows up by pressing [OK] on the remote while in a number cell.
When inputting a single character using the software keyboard as soon as you press [OK] on the remote to
input that character, then the character is displayed for a very short time to allow you to confirm that this was
the correct character.
Enter an IP address after checking the specifications of your router.
If an IP address is unknown, check the IP address of other devices (e.g. PC connected with a LAN cable).
Then, in the furthest cell to the right, assign a different number from those other devices.
5. Use [Î / ï] to select “OK”, then press [OK].
6. Repeat the same procedure as steps 4 to 5 for “Subnet Mask”, “Default Gateway”, “Primary DNS” and
“Secondary DNS”.
Enter the DNS addresses provided by your Internet provider.
If the DNS address is unknown, check the DNS address of other devices (e.g. PC connected with a LAN
cable) and assign the same DNS address.
7. Use [Î / ï / Í / Æ] to select “Apply”, then press [OK].
The unit will start a network test, and the test result will appear right after the test finishes.
8. If the network test passes, press [OK] to exit.
Continued on next page.
X6060UD_TB600MG2F_F7_OM_EN_WEB_v2.indd 18 2011/09/24 11:25:07
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Magnavox TB600MG2F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Magnavox TB600MG2F in the language / languages: English as an attachment in your email.

The manual is 2,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info