576268
17
Zoom out
Zoom in
Previous page
1/82
Next page
This unit can record to the following disc types.
IThis unit formats discs with DVD+VR mode.
IDVD-R/DVD+R discs can only be recorded to once. DVD+RW/DVD-RW discs can be recorded to and erased
many times.
IDiscs that have been tested and are proven to be compatible with this recorder:
VERBATIM DVD+R 8x, VERBATIM DVD+RW 4x
VERBATIM DVD-R 8x, VERBATIM DVD-RW 2x, MAXELL DVD-R 16x, JVC DVD-RW 4x
IWe strongly recommend for good recording quality:
TDK DVD+R 4x/8x/16x, SONY DVD+R 4x/8x/16x, MAXELL DVD+R 4x/8x/16x, SONY DVD+RW 4x,
MAXELL DVD-R 8x/16x, MAXELL DVD-RW 4x
1
Connections
2 Setup
Follow to the back side of this sheet.
This unit is compatible to play the following discs.
Logo
Attributes
8cm/12cm, single-sided, single layer disc
Approx. max. recording time (SLP mode):
360 minutes (4.7GB) (for 12cm)
108 minutes (1.4GB) (for 8cm)
DVD+RW
DVD+R
8cm/12cm, single-sided, single layer disc
Approx. max. recording time (SLP mode):
360 minutes (4.7GB) (for 12cm)
108 minutes (1.4GB) (for 8cm)
DVD-RW
DVD-R
Logo
Attributes
DVD-RW
(VIDEO mode, Finalized)
Logo
Disc
DVD-VIDEO
DVD+RW
DVD+R
DVD+R Double Layer
DVD-R
(VIDEO mode, Finalized)
CD-DA (AUDIO CD)
Logo
Disc
CD-R
(CD-DA FORMAT, MP3 files)
Video CD
CD-RW
(CD-DA FORMAT, MP3 files)
The number inside the globe refers to region of the world.
This unit can play DVDs that are labeled for ALL regions or for Region 1.
MWR10D6
2 1 Watching on TV
2
– 2 Initial Setup
Press [STANDBY-ON ]
to turn the unit on.
1. Switch the input selector on your TV to an
appropriate external input channel
(usually near channel 0).
2. Press a button on the TV’s original remote control
(see the table below) to select an external input
channel until the DVD recorder’s picture appears.
Admiral
Curtis Mathis
GE
Hitachi
JVC
Kenwood
LXI-Series
Magnavox
AUX
LINE1, LINE2, 00, 90,
91, 92, 93
INPUT, TV/VCR, 00, 90,
91, 92, 93
INPUT, AUX
VIDEO, VIDEO1, VIDEO2,
VIDEO3
AUX
00
AUX CHANNEL
Input Mode Names for Common TV Brands
Panasonic
RCA
Samsung
Sanyo
Sharp
Sony
Toshiba
Zenith
TV/VIDEO
INPUT, TV/VCR, 00, 90,
91, 92, 93
TV/VIDEO
VIDEO
00
VIDEO1, VIDEO2, VIDEO3
TV/GAME
00
DVD Recorder
Playable discs
Region codes
Recordable discs
is a trademark of DVD Format/Logo Licensing Corporation.
I Both A/V and RF cables must be connected to the TV for operation.
I See front page of the Owner's Manual for the connection with the RF modulator.
Set up the following items when turning on the unit for the first time.
Press [OK] to Clock Setting.
Using [
K
/
L
], enter the date
(month / day / year).
Press
[
{
/
B
]
to move the cursor.
Press [OK].
TV Program will automatically
appear. (usually near channel 0)
ANTENNA
AUDIO IN
VIDEO IN
L
R
AUDIO OUT
VIDEO OUT
(E1)
IN
IN
OUT
OUT
S-VIDEO
COMPONENT
VIDEO OUTPUT
L
Y
PB/CB
PR/CR
R
DIGITAL AUDIO OUTPUT
PCM / BITSTREAM
COAXIAL
AUDIO INVIDEO
RF cable (not supplied)
RF cable (supplied)
Video
cable
(supplied)
Audio
cable
(supplied)
(Back of TV)
or
Cable
TV signal
Connect
Connect
Connect Connect
Antenna
(Back of this unit)
2
1
3
4
IN
OUT
(Cable box or
Satellite box)
Remote Control
Initial Setup
Français
Español
English
Initial Setup
Channel Preset
Auto Presetting Now
CH 1
Using [K/ L], select your desired
language and press [OK].
Press [OK] to Channel Preset.
Then the unit will start getting available channels in your area.
Initial Setup
---- / -- / ---- ( ---- )
-- : ----
Initial Setup
JAN / 01 / 2006 ( SUN )
12: 00 AM
Press [OK] again.
Initial Setup
Clock Setting
ANTENNA
AUDIO IN
VIDEO IN
L
R
AUDIO OUT
VIDEO OUT
(E1)
IN
IN
OUT
OUT
S-VIDEO
COMPONENT
VIDEO OUTPUT
L
Y
PB/CB
PR/CR
R
DIGITAL AUDIO OUTPUT
PCM / BITSTREAM
COAXIAL
AUDIO INVIDEO
RF cable (not supplied)
RF cable (supplied)
Video
cable
(supplied)
Audio
cable
(supplied)
(Back of TV)
or
Cable
TV signal
Connect
Connect
Connect Connect
Antenna
(Back of this unit)
2
1
3
4
IN
OUT
(Cable box or
Satellite box)
Press repeatedly to select desired recording time.
3
– 2
Timer Recording
After all recordings, finalize your disc!
Finalize DVD-RW/-R/+R discs after recording.
Make edits compatible on DVD+RW discs after editing.
Select the recording
mode.
Record!
Select the desired
channel.
Stop recording.
Press [TIMER PROG.].
You can set up to 8 programs (once, daily or weekly).
Be sure to set the clock before starting a timer programming.
Timer Programming list appears.
Select any blank line with [K/L] and press [OK].
Timer Programming
2. ---
3. ---
4. ---
5. ---
6. ---
7. ---
8. ---
1. ---
Date Start End CH Mode
1VMN21953 / E7A60UD_QG ★★★★★
Rrecording times appear on the TV
screen (30 minutes to 8 hours).
Recording will start.
When the unit reaches the specified time,
the unit will be turned off automatically.
How to select the recording mode:
3 1 Easy Recording
3 DVD Recording
0:30
(Normal Recording)
8:00 7:30
1:00
I
0:30
This Unit DVD player
Not Playable
Playable
DVD-RW/DVD-R
DVD+R
DVD+RW
ᵤᶇᶌᵿᶊᶇᶘᶇᶌᶅᵈ
ᵤᶇᶌᵿᶊᶇᶘᶇᶌᶅᵈ
ᵫᵿᶉᶃᴾᵣᶂᶇᶒᶑᴾᵡᶍᶋᶎᵿᶒᶇᶀᶊᶃᵈ
ᵫᵿᶉᶃᴾᵣᶂᶇᶒᶑᴾᵡᶍᶋᶎᵿᶒᶇᶀᶊᶃᵈ
ᵈᵷᶍᶓᴾᶁᵿᶌᶌᶍᶒᴾᶄᶇᶌᵿᶊᶇᶘᶃᴾᶍᶐᴾᵫᵿᶉᶃᴾᵣᶂᶇᶒᶑᴾᵡᶍᶋᶎᵿᶒᶇᶀᶊᶃᴾᶇᶌᴾᶍᶒᶆᶃᶐᴾᵢᵴᵢᴾᶐᶃᶁᶍᶐᶂᶃᶐᶑᵌ
Editing titles
Not finalized
Not performing Make Edits Compatible after editing titles
ENTER!
Turn off the unit to set
the Timer Standby mode.
Timer Programming
2. ---
3. ---
4. ---
5. ---
6. ---
7. ---
8. ---
1. ---
Date Start End CH Mode
Set the date.
Timer Programming
2. ---
3. ---
4. ---
5. ---
6. ---
7. ---
8. ---
1. JAN/01 --:-- --:-- E1
Date Start End CH Mode
Timer Programming
2. ---
3. ---
4. ---
5. ---
6. ---
7. ---
8. ---
1. JAN/01 12:57AM --:-- E1
Date Start End CH Mode
Timer Programming
2. ---
3. ---
4. ---
5. ---
6. ---
7. ---
8. ---
1. JAN/01 12:57AM 1:57AM CH 8
Date Start End CH Mode
Timer Programming
2. ---
3. ---
4. ---
5. ---
6. ---
7. ---
8. ---
1. JAN/01 12:57AM 1:57AM CH 8 HQ
Date Start End CH Mode
Set start and end time.
Select the channel
number to record.
Select the recording
mode.
4 Playback
Timer Recording is now set.
TIMER REC indicator will be on.
disc tray
guide
Open the disc tray. Insert a disc.
Play!
Stop playing.
If the title menu appears, using [
K
/
L
], select a title and press [OK].
(Then select “Play” with [
K
/
L
] when playing titles recorded by this unit. )
TO TVCHANNEL VIDEO INAUDIO IN
R L3 4
ANT IN
AC 120V
STEREO AUDIO/VIDEO
RF Modulator
(commercially available)
(Back of TV)
Antenna in jack
(commercially available)
ANTENNA
AUDIO IN
VIDEO IN
L
R
AUDIO OUT
VIDEO OUT
(E1)
IN
IN
OUT
OUT
S-VIDEO
COMPONENT
VIDEO OUTPUT
L
Y
P
B
/C
B
P
R
/C
R
R
(Back of This Unit)
Audio/Video cables
(supplied)
RF cable
RF cable
(supplied)
Antenna
Cable
TV signal
3
4
6
5
2
1
Set channel 3 or 4.
Turn on your TV
and select channel
3 or 4.
Note
• The quality of
picture may
become poor if this
unit is connected to
an RF modulator.
Recording Playing discs EditingBefore you start
Connections
Getting started
Changing the
Setup menu Others Español
Please read before using this equipment.
If you need additional operating assistance after reading this owner’s manual or
to order replacement accessories, please call
TOLL FREE : 1 800-605-8453
or visit our web site at http://www.funai-corp.com
INSTRUCCIONES EN ESPAÑOL INCLUIDAS
Owner’s Manual
MWR10D6
Connection to a TV (
Before you use this unit, you need to complete connections.)
If your TV has AUDIO/VIDEO input jacks, see the section “Connections” on pages 13–15. If not, it is still possible to connect this unit to
your TV by using a STEREO AUDIO/VIDEO RF modulator (commercially available). In this case, follow the instructions below.
1) The antenna input jack of your TV may have been already occupied. If so, disconnect the RF cable from your TV, and then
connect the RF cable to the ANTENNA IN jack of this unit.
2) Connect the ANTENNA OUT jack of this unit to your RF modulator (usually marked “ANT IN”) by the RF cable.
3) Connect your RF modulator to your TV by another RF cable.
4)
Connect the AUDIO/VIDEO output jacks of this unit to the AUDIO/VIDEO input jacks of your RF modulator by audio and video cables.
5) Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area. If your
RF modulator has a Modulator/Antenna switch, set it according to your RF modulator’s manual.
6) Turn on your TV and choose the same channel as you set the RF modulator’s channel 3/4 switch to.
For more details, follow the instructions supplied with the RF modulator.
DVD Recorder
To record a program easily, refer to “Easy DVD recording” on pages 16-17 after connections are completed.
(You CANNOT record on any copyright protected DVD disc with this unit.)
Recordable disc
We strongly recommend for good recording quality:
TDK DVD+R 4x/8x/16x, SONY DVD+R 4x/8x/16x, MAXELL DVD+R 4x/8x/16x, SONY DVD+RW 4x,
MAXELL DVD-R 8x/16x, MAXELL DVD-RW 4x
Discs that have been tested and are proven to be compatible with this recorder:
VERBATIM DVD+R 8x, VERBATIM DVD+RW 4x, VERBATIM DVD-R 8x, VERBATIM DVD-RW 2x, MAXELL DVD-R 16x, JVC DVD-RW 4x
2
EN
Precautions
Laser Safety
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this
device, due to possible eye injury.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM.
LOCATION: INSIDE, NEAR THE DECK MECHANISM.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage within the product’s
enclosure that may be of sufficient magni-
tude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and mainte-
nance (servicing) instructions in the literature
accompanying the appliance.
CAUTION
:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residen
-
tial installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modi-
fications to this equipment may cause harmful interference unless the modifications are expressly
approved in the manual. The user could lose the authority to operate this equipment if an unauthor-
ized change or modification is made.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION:
POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA
FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND
.
A NOTE ABOUT RECYCLING
This products packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your
local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemi-
cal wastes.
For Customer Use:
Read carefully the information located at the back of this unit and enter below the Model No. and Serial No. Retain
this information for future reference.
Model No. _____________________
Serial No. _____________________
Make your contribution to the environment!!!
Used up batteries do not belong in the dust bin.
You can dispose of them at a collection point for used up batteries or special waste. Contact your
council for details.
Before you start
3
EN
Recording Playing discs
EditingGetting started
Changing the
Setup menu Others
Español
Before you start
Connections
Precautions (cont’d)
IMPORTANT SAFEGUARDS
1. Read Instructions - All the safety and operating
instructions should be read before the appliance is
operated.
2. Retain Instructions- The safety and operating instructions
should be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions
should be followed.
5. Cleaning - Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted
service and, that for some specific reason, such as the
possibility of the loss of an authorization code for a CATV
converter, is not intended to be unplugged by the user for
cleaning or any other purpose, may exclude the reference
to unplugging the appliance in the cleaning description
otherwise required in item 5.
6. Attachments - Do not use attachments not recommended
by the product manufacturer as they may cause hazards.
7. Water and Moisture- Do not use this product near water,
for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming pool,
and the like.
8. Accessories - Do not place this product on an unstable
cart, stand, tripod, bracket, or table. The product may
fall, causing serious injury to a child or adult, and
serious damage to the appliance. Use only with a cart,
stand, tripod, bracket, or table recommended by the
manufacturer, or sold with the product. Any mounting
of the appliance should follow the
manufacturer's instructions and
should use a mounting accessory
recommended by the manufacturer. An
appliance and cart combination should
be moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the appliance and cart
combination to overturn.
9. Ventilation - Slots and openings in the cabinet are
provided for ventilation and to ensure reliable operation
of the product and to protect it from overheating, and
these openings must not be blocked or covered. The
openings should never be blocked by placing the product
on a bed, sofa, rug, or other similar surface. This product
should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or
the manufacturer's instructions have been adhered to.
10. Power Sources - This product should be operated only
from the type of power source indicated on the marking
label. If you are not sure of the type of power supply
to your home, consult your appliance dealer or local
power company. For products intended to operate from
battery power, or other sources, refer to the operating
instructions.
11. Grounding or Polarization - This product is equipped with
a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If
you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
12. Power Cord Protection - Power supply cords should
be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the
appliance.
13. Outdoor Antenna Grounding - If an outside antenna or
cable system is connected to the product, be sure the
antenna or cable system is grounded so as to provide
some protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code, ANSI/
NFPA No. 70, provides information with regard to proper
grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements for
the grounding electrode. (Fig. A)
14. Lightning - For added protection for this product during a
lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line
surges.
15. Power Lines - An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact with
them might be fatal.
16. Overloading - Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
17. Object and Liquid Entry - Never push objects of any kind
into this product through any openings as they may touch
dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any
kind on the product.
18. Servicing - Do not attempt to service this product yourself
as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
19. Damage Requiring Service - Unplug this product from
the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the
product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the
operating instructions. Adjust only those controls that
are covered by the operating instructions as an improper
adjustment of other controls may result in damage and
will often require extensive work by a qualified technician
to restore the product to its normal operation.
e. If the product has been dropped or damaged in any way.
f. When the product exhibits a distinct change in
performance this indicates a need for service.
20. Replacement Parts - When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or have
the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other
hazards.
21. Safety Check - Upon completion of any service or repairs
to this product, ask the service technician to perform
safety checks to determine that the product is in proper
operating condition.
22. Heat - This product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
FIGURE A
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
ANTENNA
LEAD
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND
CLAMP
GROUND CLAMP
ELECTRIC
SERVICE
EQUIPMENT
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC – NATIONAL ELECTRICAL CODE
S2898A
Before you start
4
EN
Precautions (cont’d)
Before you start
About Copyright
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.
This product incorporates copyright protection technology that is protected by U.S. patents and
other intellectual property rights. Use of this copyright protection technology must be authorized
by Macrovision, and is intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision. Reverse engineering or disassembly is prohibited.
Moisture Condensation Warning
Moisture condensation may occur inside the unit when it is moved from a cold place to a warm
place or after heating a cold room or under conditions of high humidity. Do not use this unit at least
for 2 hours until its inside gets dry.
Notice for progressive scan output
Consumers should note that not all high definition television sets are fully compatible with this
product and may cause artifacts to be displayed in the picture. In case of picture problems with 525
progressive scan output, it is recommended that the user switch the connection to the ‘standard
definition’ output. If there are questions regarding your TV set compatibility with this 525p DVD
recorder, please contact our customer service center.
Installation Location
For safety and optimum performance of this unit:
Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit.
Do not place the unit directly on top of the TV.
Shield it from direct sunlight and keep it away from sources of intense heat. Avoid dusty or
humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block
the ventilation holes on the sides of the unit. Avoid locations subject to strong vibration or strong
magnetic fields.
Avoid the Hazards of Electrical Shock and Fire
Do not handle the power cord with wet hands.
Do not pull on the power cord when disconnecting it from AC wall outlet. Grasp it by the plug.
If, by accident, water is spilled on this unit, unplug the power cord immediately and take the unit to
our Authorized Service Center for servicing.
Remote control
(NA471UD) with
two AAA batteries
RF cable
(WPZ0901CAB01
or WPZ0901TM002)
Audio/Video cables
(WPZ0102TM015
or WPZ0102LTE01)
Owner’s Manual
(1VMN21952)
Quick Guide
(1VMN21953)
Owner's Manual
Supplied Accessory
5
EN
Recording Playing discs
EditingGetting started
Changing the
Setup menu Others
Español
Before you start
Connections
Precautions (cont’d)
Before you start
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks
of Dolby Laboratories.
SERVICING
Please refer to relevant topics on “Troubleshooting” on pages 71-74 before returning the product.
If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-
serviceable parts inside. Turn off, unplug the power plug and please call our help line mentioned
on the front page to locate an Authorized Service Center.
CLEANING THE CABINET
Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing
alcohol, spirits, ammonia or abrasive.
CLEANING DISCS
When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do
not wipe in a circular motion.
Do not use solvents such as benzine, thinner, commercially available cleaners, detergent,
abrasive cleaning agents or antistatic spray intended for analogue records.
CLEANING THE DISC LENS
If this unit still does not perform properly although you refer to the relevant sections and to
“Troubleshooting” in this Owner’s Manual, the laser optical pickup unit may be dirty. Consult your
dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.
DISC HANDLING
Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.
Always store the disc in its protective case when it is not used.
IR SIGNAL CHECK
If the remote control does not work properly, you can test if the remote control sends out the infrared
signal with AM radio or a digital camera (including built-in camera of cellular phone). It will help to
define the cause of malfunction.
With an AM radio:
Tune a AM radio to a band with no broadcasting. Press a button on remote control toward the
radio. Sound will be fluttering when you press any key and the radio receives the signal. This
means the remote control unit is working.
With a digital camera (including built-in camera of cellular phone):
Direct a digital camera to remote control, press and hold a button on remote control. If infrared
light appears through digital camera, the remote is working.
Maintenance
Dolby Digital Recording
“Dolby
®
Digital Recording enables consumers to record high-quality video with stereo sound on
recordable DVD discs. The technology, when utilized instead of PCM recording, also saves record-
able disc space, allowing for higher video resolution or extended recording time on each DVD.
DVDs created using Dolby Digital Recording will play back on all DVD-Video players.”
Note: This is true when the players are compatible with actual recordable DVD discs.
6
EN
Table of contents
Before you start
Playing discs using the title menu . . . . . . . . . . . 41
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Special playback . . . . . . . . . . . . . . . . . . . . . . . . . 42
Resume play
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Fast forward / Fast reverse
. . . . . . . . . . . . . . . . . 42
Skipping TV commercials during play
. . . . . . . . . 42
Rapid play
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Step by step playback
. . . . . . . . . . . . . . . . . . . . . 43
Slow forward / Slow reverse play
. . . . . . . . . . . . 43
Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Marker Setup
. . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Title/Chapter search
. . . . . . . . . . . . . . . . . . . . . . 45
Track search
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Time search
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Repeat/Random/Program playback . . . . . . . . . . 47
Repeat playback
. . . . . . . . . . . . . . . . . . . . . . . . . 47
Random playback
. . . . . . . . . . . . . . . . . . . . . . . . 47
Program playback
. . . . . . . . . . . . . . . . . . . . . . . . 48
Selecting the format of audio and video . . . . . . 48
Switching subtitles
. . . . . . . . . . . . . . . . . . . . . . . 48
Switching audio soundtrack
. . . . . . . . . . . . . . . . 49
Switching virtual surround system
. . . . . . . . . . . 49
Switching camera angles
. . . . . . . . . . . . . . . . . . 50
Reducing block noise
. . . . . . . . . . . . . . . . . . . . . 50
Editing . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Information on disc editing . . . . . . . . . . . . . . . . . 51
Guide to a title list
. . . . . . . . . . . . . . . . . . . . . . . . 51
Editing discs
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Editing discs (Setup menu)
. . . . . . . . . . . . . . . . . 51
Editing discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Deleting titles
. . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Putting names on titles
. . . . . . . . . . . . . . . . . . . . 53
Setting chapter marks
. . . . . . . . . . . . . . . . . . . . . 54
Clearing chapter marks
. . . . . . . . . . . . . . . . . . . . 54
Hiding chapters
. . . . . . . . . . . . . . . . . . . . . . . . . . 56
Setting pictures for thumbnails
. . . . . . . . . . . . . . 57
Dividing a title
. . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Editing discs (Setup menu). . . . . . . . . . . . . . . . . 59
Putting name on disc
. . . . . . . . . . . . . . . . . . . . . 59
Setting or releasing disc protect
. . . . . . . . . . . . . 60
Erasing disc
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Making edits compatible
. . . . . . . . . . . . . . . . . . . 62
Changing the Setup menu. . . . . . . . . . 63
Tour of the Setup menu. . . . . . . . . . . . . . . . . . . . 63
Language setting . . . . . . . . . . . . . . . . . . . . . . . . . 64
Display setting . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Audio setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Video setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Settings for Parental lock level. . . . . . . . . . . . . . 69
Settings for PBC (Playback Control) . . . . . . . . . 70
Others . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Language code. . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Frequently Asked Questions. . . . . . . . . . . . . . . . 75
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Español . . . . . . . . . . . . . . . . . . . . . . . . . 77
Limited Warranty . . . . . . . . . Back Cover
Before you start . . . . . . . . . . . . . . . . . . . 2
Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Symbol in this Owner’s Manual
. . . . . . . . . . . . . . 7
Functional overview. . . . . . . . . . . . . . . . . . . . . . . . 8
Installing batteries in the remote control
. . . . . . . 11
Using a remote control
. . . . . . . . . . . . . . . . . . . . 11
DISPLAY menu
. . . . . . . . . . . . . . . . . . . . . . . . . . 11
Setup menus
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Connections . . . . . . . . . . . . . . . . . . . . . 13
Connection to a TV . . . . . . . . . . . . . . . . . . . . . . . 13
Connection to a cable box or satellite box . . . . 14
Connection to an Audio System. . . . . . . . . . . . . 15
Getting started . . . . . . . . . . . . . . . . . . . 16
Easy DVD recording. . . . . . . . . . . . . . . . . . . . . . . 16
Initial setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Channel setting . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Getting channels automatically
. . . . . . . . . . . . . . 18
Adding/deleting channels
. . . . . . . . . . . . . . . . . . 19
Selecting the TV stereo or SAP . . . . . . . . . . . . . 20
Setting the clock. . . . . . . . . . . . . . . . . . . . . . . . . . 21
Auto Clock Setting
. . . . . . . . . . . . . . . . . . . . . . . 21
Manual Clock Setting
. . . . . . . . . . . . . . . . . . . . . 22
Setting the Daylight Saving Time
. . . . . . . . . . . . 23
Selecting the TV aspect ratio . . . . . . . . . . . . . . . 23
Recording . . . . . . . . . . . . . . . . . . . . . . . 24
Information on DVD recording . . . . . . . . . . . . . . 24
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Recordable disc
. . . . . . . . . . . . . . . . . . . . . . . . . 24
Recording mode
. . . . . . . . . . . . . . . . . . . . . . . . . 24
Making discs playable in other DVD player
(Finalize/Make Edits Compatible)
. . . . . . . . . . . . 25
Before recording . . . . . . . . . . . . . . . . . . . . . . . . . 26
Replacing disc menu
. . . . . . . . . . . . . . . . . . . . . . 26
Setting for Auto Chapter
. . . . . . . . . . . . . . . . . . . 26
Basic recording . . . . . . . . . . . . . . . . . . . . . . . . . . 27
One-touch Timer Recording . . . . . . . . . . . . . . . . 28
Timer Recording. . . . . . . . . . . . . . . . . . . . . . . . . . 29
Hints for Timer Recording
. . . . . . . . . . . . . . . . . . 31
Overwriting an existing title . . . . . . . . . . . . . . . . 32
Overwriting from the beginning of the title
. . . . . 32
Overwriting in the middle of the title
. . . . . . . . . . 32
Hints for Overwriting
. . . . . . . . . . . . . . . . . . . . . . 33
Settings for an external source . . . . . . . . . . . . . 34
Connection to an external source
. . . . . . . . . . . . 34
Recording from an external source
. . . . . . . . . . . 35
Setting a disc to protect . . . . . . . . . . . . . . . . . . . 35
Playing the discs in other DVD players . . . . . . . 36
Finalizing a disc
. . . . . . . . . . . . . . . . . . . . . . . . . 36
Auto finalizing
. . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Playing discs . . . . . . . . . . . . . . . . . . . . 38
Information on DVD play . . . . . . . . . . . . . . . . . . . 38
Guide to displays
. . . . . . . . . . . . . . . . . . . . . . . . 38
Basic playback . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Playing MP3 disc
. . . . . . . . . . . . . . . . . . . . . . . . 40
Playing discs using the disc menu
. . . . . . . . . . . 41
7
EN
Recording Playing discs
EditingGetting started
Changing the
Setup menu Others
Español
Before you start
Connections
Before you start
Recording
This unit is compatible with DVD+RW/DVD-RW,
which is rewritable repeatedly and DVD+R/DVD-
R, which is available for recording once. You can
choose either one for your convenience. Even if you
choose DVD-RW/DVD-R discs, these discs are for
-
matted with DVD+VR mode.
Up to 8 program recording:
You can program the unit to record up to 8 pro
-
grams, with in a month in advance. Daily or weekly
program recordings are also available.
One-touch Timer Recording:
You can easily set a recording time as you prefer.
Every time
[RECORD
I
] or [REC
I
] is pressed dur-
ing recording, the recording time will be increased by
30 minutes up to 8 hours. The recording automatical
-
ly stops when the recording time you set is reached.
Automatic Chapter mark setting:
Chapter marks will be put on recordings as you set in
the Setup menu before attempting to record.
Automatic Title list making:
The unit makes title list with the index automatically.
Left channel stereo recording:
This unit can record the sound of the Left channel
monaural input as Left and Right channels automati
-
cally (the input from the EXT2 only).
Play
Theater surround sound in your home:
When connecting the unit to an amplifier or a decoder
which is compatible with Dolby Digital, you are allowed
to experience the theater surround sound from discs
with surround sound system.
Quick search for what you want to watch:
You can easily find the part you want to watch using the
search function. Search for a desired point on a disc by
title, chapter or time.
Virtual Surround System:
You can enjoy stereophonic space through your exciting
2 channel stereo system.
Playing back on MP3 disc:
You can enjoy MP3 files which are recorded on
CD-R/RW.
Editing
Deleting titles:
You can delete titles which you do not need anymore.
Putting names on titles:
You can put your favorite names on titles.
Setting / Clearing chapter marks
You can set / clear chapter marks on titles.
Hiding unwanted chapters:
To keep others from playing back some chapters without
permission, you can hide chapters.
Setting pictures for thumbnails:
You can change pictures for thumbnails.
Dividing titles (DVD+RW/DVD-RW only):
You can divide a title into two or more.
Putting name on disc:
You can put your favorite disc name.
Compatibility
Available for playing discs on a regular DVD
player:
Recorded discs can be played on regular DVD
players, including computer DVD drives compatible
with DVD-Video playback. You will need to finalize
the discs recorded on DVD+R/DVD-RW/DVD-R discs
to play in other DVD players.
Others
Progressive Scan system
Unlike conventional interlace scanning, the progressive
scan system provides less flickering and images in higher
resolution than that of traditional television
signals.
This DVD unit not only plays DVDs and CDs but also offers features for you to record to DVD discs and edit
them after that.
The following features are offered with this unit.
Symbol in this Owner’s Manual
To specify for what disc type each function is, we put the
following symbols at the beginning of each item to operate.
*DVD-RW (VR mode) disc is not played in this unit.
Features
Symbol Description
DVD-V
DVD-V
DVD-RWDVD-RW
Video
Video CD
Video CD
DVD-RDVD-R
DVD-RW
DVD-RW
+VR
DVD+RDVD+R
DVD+
RW
DVD+
RW
DVD-RDVD-R
Video
+VR
CD
CD
MP3
MP3
Available to DVD-Video discs
Available to DVD+RW
discs
Available to DVD+R discs
DVD+RDVD+R
Available to DVD+R DL discs
Available to DVD-RW discs formatted
with DVD+VR mode
Available to DVD-R discs formatted
with DVD+VR mode
Available to DVD-RW discs
(Video mode, Finalized)
Available to DVD-R discs
(Video mode, Finalized)
Available to Audio CDs
Available to CD-R/RW discs with MP3
files
Available to Video CDs
DL
8
EN
Functional overview
Before you start
Front Panel
1. Disc tray
Place a disc when opening the disc tray.
2. OPEN/CLOSE
A button*
Press to open or close the disc tray.
3. PLAY
B button
Press to start or resume play.
4. RECORD
I button
Press once to start a recording. Press repeatedly
to start a One-touch Timer Recording.
5. PREV
H button
During playback, press to return to the beginning
of the current chapter or track.
During playback, press and hold for 1.5 seconds
to fast reverse.
Or when playback is paused, press to play
reverse step by step.
When playback is paused, press and hold for 1.5
seconds to play slow reverse.
6. STOP
C button
Press to stop playback or recording.
7. NEXT G button
During playback, press to skip to the next chap
-
ter or track.
During playback, press and hold for 1.5 seconds to
fast forward.
Or when playback is paused, press to play for-
ward step by step.
When playback is paused, press and hold for 1.5
seconds to play slow forward.
8. STANDBY-ON
button
Press to turn the unit on and off.
If timer programmings have been set, press to
set the unit in timer-standby mode.
9. AUDIO input jacks (
EXT2)
Use to connect external equipment with a stand
-
ard audio cable.
10. VIDEO input jack (
EXT2)
Use to connect external equipment with a stand
-
ard video cable.
11. S-VIDEO input jack (
EXT2)
Use to connect the S-Video output of external
equipment with an S-Video cable.
12. Remote control sensor
Receive signals from your remote control so that
you can control the unit from a distance.
5 6
1110 9
7 8
12
1 2
* 3 4
Front Panel Indicator Guide
1 2 3
1. POWER indicator
Light on when power is on.
2. RECORD indicator
Light on when recording function works.
3. TIMER REC indicator
Light on when Timer Programming is set.
Light on during One-touch Timer Recording.
Flash when all Timer Programmings have been
finished, or when a program cannot be performed
by some reason.
*
The unit can also
be turned on
by pressing this
button.
9
EN
Recording Playing discs
EditingGetting started
Changing the
Setup menu Others
Español
Before you start
Connections
Rear Panel
ANTENNA
AUDIO IN
VIDEO IN
L
R
AUDIO OUT
VIDEO OUT
(E1)
IN
IN
OUT
OUT
S-VIDEO
COMPONENT
VIDEO OUTPUT
L
Y
P
B
/C
B
P
R
/C
R
R
DIGITAL AUDIO OUTPUT
PCM / BITSTREAM
COAXIAL
1
2 3 4
5678910
11
1. ANTENNA IN jack
Use to connect an antenna.
2. VIDEO IN jack (
EXT1)
Use to connect external equipment with a stand-
ard video cable.
3. VIDEO OUT jack
Use to connect a TV monitor, AV receiver or
other equipment with a standard video cable.
4. AC Power Cord
Connect to a standard AC outlet to supply power
to this unit.
5. COAXIAL DIGITAL AUDIO OUTPUT jack
Use to connect an AV receiver, Dolby Digital
decoder or other equipment with a coaxial digital
input jack with a digital coaxial cable.
6. AUDIO OUT jacks
Use to connect a TV monitor, AV receiver or
other equipment with a standard audio cable.
7.
COMPONENT VIDEO OUTPUT jacks
Use to connect a TV monitor with component
video inputs with a component video cable.
8. S-VIDEO OUT jack
Use to connect the S-Video input of a TV moni
-
tor, AV receiver or other equipment with an S-
Video cable.
9. S-VIDEO IN jack (EXT1)
Use to connect the S-Video output of external
equipment with an S-Video cable.
10. AUDIO IN jacks (
EXT1)
Use to connect external equipment with a stand
-
ard audio cable.
11. ANTENNA OUT jack
Use to connect an antenna cable to pass the sig
-
nal from the TV ANTENNA IN to your TV moni
-
tor.
Note
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent
damage to the unit.
This unit does not have the RF modulator.
Functional overview (cont’d)
Before you start
10
EN
13. REC
I
button
Press once to start a record-
ing. Press repeatedly to
start a One-Touch Timer
Recording.
14. RAPID PLAY button
During playback, press to
playback in a slightly faster/
slower mode with keeping the
audio quality.
15. DISPLAY button
Press to display the Display
menu on or off.
16. OPEN/CLOSE
A button*
Press to open or close the
disc tray.
17. CM SKIP button
During playback, press to skip
30 seconds.
18. NEXT G button
During playback, press to skip to
the next chapter or track.
Or when playback is paused,
press to play forward step by step.
19. FWD D button
During playback, press to play
fast forward.
Or when playback is paused,
press to play slow forward.
20. PAUSE
F button
Press to pause play or record
-
ing.
21. TITLE button
Press to display the Title list.
22. SETUP button
Press to display the Setup
menu.
During DVD playback, press
and hold for more than 3 sec
-
onds to switch the progres
-
sive scanning mode to the
interlace mode.
23. TIMER PROG. button
Press to display the Timer
programming list.
24. CHANNEL
-
/ + buttons
Press to change the channel
up and down.
9
1
17
18
16*
20
22
21
24
23
3
4
5
11
12
10
2
6
7
8
19
13
15
14
(
*
) The unit can also be
turned on by press
-
ing this button.
Functional overview (cont’d)
Before you start
Remote Control
5. REV E button
During playback, press to fast
reverse.
Or when playback is paused,
press to play slow reverse.
6. PLAY
B button
Press to start or resume play.
7. STOP
C button
Press to stop playback or
recording.
Press to exit from the Title list.
8. RETURN button
Press to return to the previ
-
ously displayed menu screen.
9. OK button
Press to confirm or select
menu items.
10. Cursor
K / L / { / B buttons
Press to select items or settings.
11. DISC MENU button
Press to display the Disc menu.
12. REC MODE button
Press to switch the recording
mode.
1. STANDBY-ON
button
Press to turn the unit on and off.
If timer programmings have
been set, press to set the unit
in timer-standby mode.
2. Number/Character buttons
Press to select channel numbers.
Press to select a title/chapter/
track on display.
Press to enter values for the
settings in the Setup menu.
Or press to enter title names.
3. CLEAR button
Press to clear the password
once entered or to cancel the
programming for CD or to clear
the selecting marker number
in the Edit menu or to clear the
program once entered in the
Timer Programming list, etc.
4. PREV H button
During playback, press to return
to the beginning of the current
chapter or track. Or when play
-
back is paused, press to play
reverse step by step.
11
EN
Recording Playing discs
EditingGetting started
Changing the
Setup menu Others
Español
Before you start
Connections
Functional overview (cont’d)
Before you start
Press [DISPLAY] to call up the
Display menu. This menu will
give you the information on the
playing disc. Some operations are
available while disc is playing.
1. Indicates a disc type and a
format mode (Format mode is
displayed with DVD-R
W/DVD-R
(Video mode) disc inserted).
NOTE: In some descriptions on
this manual, only one disc type
is indicated as an example.
2. Indicates a channel number.
3. Indicates a recording mode and
possible recording time left.
4. Indicates a title number, chapter
number and the time lapse of
disc play.
5. Each icon means:
6. Indicates current disc status.
Using a remote control
Keep in mind the following when using the remote
control:
Make sure that there is no obstacle between the
remote control and the remote sensor on the unit.
Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the
remote sensor of the unit.
Remote control for different devices can interfere
with each other. Avoid using remote control for
other equipment located close to the unit.
Replace the batteries when you notice a fall off in
the operating range of the remote control.
The maximum operable ranges from the unit are
as follows.
-
Line of sight: approx. 23 feet (7m)
-
Either side of the center:
approx. 16 feet (5m) within 30°
-
Above: approx. 16 feet (5m) within 15°
-
Below: approx. 10 feet (3m) within 30°
Installing batteries in the remote control
Install two “AAA” size batteries (supplied) matching
the polarity indicated inside battery compartment of
the remote control.
Note:
Incorrect use of batteries can result in hazards
such as leakage and bursting. Please observe the
following:
Do not mix new and old batteries together.
Do not use different kinds of batteries together,
although they may look similar, different batteries
may have different voltages.
Make sure that the plus and minus ends of
each battery match the indications in the battery
compartment.
Remove batteries from equipment that is not going
to be used for a month or more.
When disposing of used batteries, please comply
with governmental regulations or environmental
public instruction’s rules that apply in your country
or area.
Do not recharge, short-circuit, heat, burn or
disassemble batteries.
R
E
C
/
O
T
R
R
E
C
S
P
E
E
D
O
P
E
N
/
C
L
O
S
E
C
H
A
N
N
E
L
R
E
V
F
W
D
S
T
O
P
P
L
A
Y
P
O
W
E
R
S
-
V
I
D
E
O
V
I
D
E
O
A
U
D
I
O
L
R
C
L
E
A
R
C
M
S
K
IP
S
K
I
P
R
E
C
P
A
U
S
E
P
E
N
T
E
R
M
E
N
U
P
L
A
Y
L
I
S
T
T
O
P
M
E
N
U
/
O
R
IG
IN
A
L
1
2
3
4
5
6
7
S
T
A
N
D
B
Y
-
O
N
O
P
E
N
/
C
L
O
S
E
8
9
0
F
W
D
S
T
O
P
P
L
A
Y
R
E
V
Remote
control
30°
Within about
23 feet (7m)
30°
2
1
3
Guide to Displays on screen menu
This unit uses the following on screen menu for most operations: Setup menu and Title list, and Display menu.
They allow you to change the playing status of the disc during playback.
The Display menu also gives you information on the status of the disc.
: Search
: Audio
: Subtitle
: Angle
: Repeat
: Marker
: Noise Reduction
: Zoom
: Surround
DISPLAY menu
DVD+RW
1 1 0:00:00
CH 2
14
5 25 2
6
HQ(1Hr) 1:01
33
12
EN
Functional overview (cont’d)
Before you start
Setup menus
Press [SETUP] to display the Setup menu. Then using [K / L], select a menu and press [OK] to display
the menu. These menus provide entries to all main functions of the unit.
1. Required Settings:
To set up the required
settings.
2. Playback:
To set up the unit to play
discs as you prefer.
3. Display:
To set up the OSD screen
and the front display of the
unit as you prefer.
4. Recording:
To set up the unit to record
to discs as you prefer.
5. Clock:
To set up the clock of the
unit as you need.
6. Channel:
To adjust the channel setting
of the unit as you prefer.
7. Disc Edit / CD Playback
Mode:
Disc Edit is available
only when a disc which is
formatted with DVD+VR
mode is inserted into the
unit. When a DVD-Video disc
(commercially available),
a blank disc, and DVD-R
formatted with other than
DVD+VR is inserted into the
unit, you cannot selectDisc
Edit.
CD Playback Mode” is
available only when an Audio
CD disc, a Video CD or a
CD-R/RW disc with MP3 files
is inserted into the unit.
1. Edit Disc Name:
Allows you to rename the
disc formatted with DVD+VR.
2. Disc Protect :
Allows you to protect a disc
from accidental editing or
recording.
3. Erase Disc (DVD+RW/DVD-
RW only):
Allows you to erase all
contents in the disc and
format it.
4. Make Edits Compatible
(DVD+RW only):
Allows you to make edits
possible to play discs in
other units after editing titles.
Finalize (DVD+R/DVD-R/
DVD-RW only):
Allows you to finalize a disc
containing recorded titles.
5. Random Play:
Allows you to activate the
random playback feature.
6. Program Play (Audio CD/
Video CD only):
Allows you to activate the
programmed playback
feature.
7. PBC (Video CD only)
Allows you to select images
or information on the menu
screen by activating PBC
(Playback control) function.
Disc Edit
Erase Disc
Make Edits Compatible
Disc Protect OFF ON
Edit Disc Name
2
3
11
2
34
3
Setup
Playback
Display
Recording
Clock
Channel
Disc Edit
Required Settings
1
2
3
4
5
6
7
1
2
3
4
5
6
7
CD Playback Mode
Program Play
PBC (Video CD only) ON
Random Play
4
5
5
57
6
<Disc Edit menu (DVD+RW)>
<CD Playback Mode menu>
Disc Edit
Erase Disc
Finalize
Disc Protect OFF ON
Edit Disc Name
2
3
11
2
34
3
<Disc Edit menu (DVD-RW)>
Disc Edit
Finalize
Disc Protect OFF ON
Edit Disc Name
2
3
11
2
4
<Disc Edit menu (DVD+R/DVD-R)>
13
EN
Recording Playing discs
EditingBefore you start Connections Getting started
Changing the
Setup menu Others
Español
Connections
Connection to a TV
Make one of the following connections, depending on the capabilities of your existing equipment.
ANTENNA
AUDIO IN
VIDEO IN
L
R
AUDIO OUT
VIDEO OUT
(E1)
IN
IN
OUT
OUT
S-VIDEO
COMPONENT
VIDEO OUTPUT
L
Y
P
B
/C
B
P
R
/C
R
R
COAXIAL
R L
AUDIO OUT
VIDEO OUT
L
R
S-VIDEO IN
IN
OUT
S-VIDEO
P
B/CB
Y
P
R/CR
COMPONENT
VIDEO IN
COMPONENT
VIDEO OUTPUT
Y
PB/CB
PR/CR
AUDIO OUT
TV
Basic Audio
Method 1 Method 2
Better picture Best picture
S-VIDEO OUT
COMPONENT VIDEO OUT
Audio cable
(supplied)
S-Video cable
(commercially available)
Component Video cable
(commercially available)
This unit
ANTENNA
AUDIO IN
VIDEO IN
L
R
AUDIO OUT
VIDEO OUT
(E1)
IN
IN
OUT
OUT
S-VIDEO
COMPONENT
VIDEO OUTPUT
L
Y
P
B
/C
B
P
R
/C
R
R
DIGITAL AUDIO OUTPUT
PCM / BITSTREAM
COAXIAL
AUDIO INVIDEO
RF cable
(supplied)
Video
cable
(supplied)
Audio
cable
(supplied)
(Back of TV)
or
Cable
TV signal
or
Cable
TV signal
Connect
Connect
Connect
Connect
Disconnect
Antenna
Antenna
(Back of this unit)
(Back of TV)
3
2
1
4
5
Plug in the AC
power cord
of this unit.
6
Note
Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted
due to the copy protection system.
When Progressive Scan mode is selected, no video signal will be output from the VIDEO OUT or
S-VIDEO OUT jack.
After you have completed connections
• Switch the input selector on your TV to an appropriate external input channel (usually near channel 0). Press a
button on the TV’s original remote control that selects an external input channel until the DVD recorder’s picture
appears. Check your TV owner’s manual for details.
To set progressive scan mode, refer to page 68
• This unit is compatible with the Progressive Scan System. The feature provides you with the higher definition
images than the traditional output system does. To utilize this feature, you must set Progressive Scan mode to “ON”.
Admiral
Curtis Mathis
GE
Hitachi
JVC
Kenwood
LXI-Series
Magnavox
AUX
LINE1, LINE2, 00, 90, 91, 92, 93
INPUT, TV/VCR, 00, 90, 91, 92, 93
INPUT, AUX
VIDEO, VIDEO1, VIDEO2, VIDEO3
AUX
00
AUX CHANNEL
Input Mode Names for Common TV Brands
Panasonic
RCA
Samsung
Sanyo
Sharp
Sony
Toshiba
Zenith
TV/VIDEO
INPUT, TV/VCR, 00, 90, 91, 92, 93
TV/VIDEO
VIDEO
00
VIDEO1, VIDEO2, VIDEO3
TV/GAME
00
14
EN
Connection to a cable box or satellite box
Connections
Note to the Cable TV System Installer :
This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the
National Electrical Code, which provides guidelines for proper grounding - in particular, specifying
that the cable ground shall be connected to the grounding system of the building, as close to the
point of cable entry as possible.
With this setup:
You can record any unscrambled channel by selecting the channel on the cable box or satellite
box. Be sure that the cable box or satellite box is turned on.
You cannot record one channel while watching another channel.
ANTENNA
AUDIO IN
VIDEO IN
L
R
AUDIO OUT
VIDEO OUT
(E1)
IN
IN
OUT
OUT
S-VIDEO
COMPONENT
VIDEO OUTPUT
L
Y
P
B
/C
B
P
R
/C
R
R
DIGITAL AUDIO OUTPUT
PCM / BITSTREAM
COAXIAL
AUDIO INVIDEO
RF cable
(supplied)
Video
cable
(supplied)
Audio
cable
(supplied)
(Back of TV)
Cable
TV signal
Connect
Connect
Connect Connect
(Back of this unit)
2
1
3
4
IN
O
U
T
(Cable box or
Satellite box)
(Commercially
available)
RF cable
15
EN
Recording Playing discs
EditingBefore you start Connections Getting started
Changing the
Setup menu Others
Español
Connection to an Audio System
Connections
When you change the connections, all devices should be turned off.
Refer to the operation manual accompanying external devices for more information.
AUDIO OUT
VIDEO OUT
L
R
Stereo system
COAXIAL
DIGITAL AUDIO OUTPUT
PCM / BITSTREAM
COAXIAL
AUDIO
Method 1
Analog audio
input jacks
Digital audio
input jack
AUDIO OUT
DIGITAL
AUDIO OUT
Method 2
Audio cable
(supplied)
Audio Coaxial
Digital cable
(commercially
available)
Dolby Digital decoder,
MD deck or DAT deck
This unit
Note
The audio source on a disc in a Dolby Digital Multi-channel
surround format cannot be recorded as digital sound by an
MD or DAT deck.
By hooking this unit up to a Multi-channel Dolby Digital
decoder, you can enjoy high-quality Dolby Digital Multi-
channel surround sound as heard in the movie theaters.
Playing a DVD using incorrect settings may generate noise
distortion and may also damage the speakers.
If output is Dolby Digital
encoded audio, connect to
a Dolby Digital decoder.
Unless connected to a
Dolby Digital decoder.
Connecting to an MD deck
or DAT deck.
-
-
-
STREAM
PCM
PCM
Setup >Playback >Disc Audio >Digital Out >
PCM
Dolby Digital
Setting
Connection
* To complete these settings, refer to pages 66-67.
Note
Playing a DVD using incorrect settings may
generate noise distortion and may also damage
the speakers.
16
EN
Easy DVD recording
Getting started
The following will help you to understand easily how to record to DVD discs.
Note:
Make sure batteries are in the remote control and you have connected this unit with the TV correctly.
Step 1: Choose a disc type.
There are several types of recordable DVD discs to choose from.
This unit can record on the following type of discs.
For example, when you want to record repeatedly on the
same disc, select the rewritable DVD+RW/DVD-RW type disc.
When you want to save recordings without any alteration, a
non-rewritable DVD+R/DVD-R can be your choice.
Step 3:
Insert a blank disc.
To open
To close
2
Loading
This operation may take a while to be recognized.
3
1
Step 2: Turn on the
unit.
Remote Control
Step 4: Select the
recording
mode.
HQ (1Hr) 0:58
Formatting 90%
DVD+RW/DVD-RW only
Select the input to which
the unit is connected on
your TV.
17
EN
Recording Playing discs
EditingBefore you start
Changing the
Setup menu Others
Español
Connections Getting started
Easy DVD recording (cont’d)
Getting started
Step 6: Record
on DVD
disc.
Step 5: Select the
desired
channel.
Step 7: Stop the
recording.
CH 12
I
Writing to Disc 90%
Hint 1: Play the recorded contents
You can select the title you want to play from a displayed title list, and
immediately start to play. Recorded contents are easily accessible, with
simple procedure of choosing a title on in the menu screen.
What are titles and chapters?
The contents of the DVD disc are generally divided into titles. Titles
may be further divided into chapters.
Hint 2: Edit the recorded disc
You will find editing discs is easy. This unit offers convenient edit functions to discs formatted with
DVD+VR mode.
You can edit the following from a title list or setup menu.
Deleting titles
Putting names on titles
Setting / clearing chapter marks
Hiding chapters
Setting pictures for thumbnails
Dividing a title (DVD+RW/DVD-RW only)
Putting name on disc
Finalizing a Disc
This will allow DVD+R/DVD-RW/DVD-R discs recorded on this unit to be played back on a different DVD
player
without finalization it will not be playable on other units.
After finalizing a disc, you cannot edit contents on that disc.
DVD+RW discs is not required to finalize but to “Make Edits Compatible” to play on other units after
editing. You can edit the disc after
“Make Edits Compatible”.
Track 1 Track 2 Track 3 Track 4 Track 5
Start Rec. Stop/Start Stop Rec.
Start Rec. Stop Rec.
Title 1 Title 2
Chapter 1 Chapter 1Chapter 2 Chapter 3 Chapter 2
This operation may take
a while to be completed.
1 SP (2Hr)
2
ENPTY TITLE
1:41:17
SP (2Hr)
NOV/21/06 11:00
AM
CH12 SP
NOV/21/06 0:20:44
18
EN
Getting started
3
4
1
Initial setting
Turn on this unit for the first time,
you need to follow these steps.
1
Press [STANDBY-ON
].
2
Turn the TV on. Select the input
to which the unit is connected.
Refer to the table on page 13.
“Initial Setup” will automatically
appear.
3
Using [K / L], select your
desired language on screen
menu. Then press [OK] to set
language.
“Channel Preset” will automatically
appear.
4
Press [OK] to start Channel
Preset.
The unit will start getting channels
available in your area.
After channel setting is finished,
“Clock Setting” will appear.
Then press [OK].
5
Follow to step 3 in “Manual
Clock Setting” on page 22.
If a Public Broadcasting Station (PBS)
is available in your area, follow
Auto
Clock Setting
on page 21.
Channel setting
2
Using [K / L], select “Channel”.
Press [OK].
Channel menu will appear.
3
Using [K / L], select “Auto
Channel Preset”. Press [OK].
The unit will start getting channels
available in your area.
4
Press [SETUP] to exit.
You can select only the
channels memorized in this unit
by using
[CHANNEL
-
/ +] and
the Number buttons.
TV / VIDEO
*This button can
be labeled as
INPUT , AUX , etc.
TV's original
remote control
Auto Presetting Now
CH 1
If you have changed antenna
connection, we recommend that
you program available channels
in your area with the following
procedures.
Getting channels
automatically
1
Press [SETUP].
Initial Setup
Channel Preset
2
3
1
4
Initial Setup
Français
Español
English
Initial Setup
Clock Setting
19
EN
Recording Playing discs
EditingBefore you start
Changing the
Setup menu Others
Español
Connections Getting started
Note
If the auto channel presetting is cancelled during presetting, some channels not yet preset may not be
received.
The selection will depend on how you receive the TV channels.
To cancel the auto channel presetting during scanning:
Press
[RETURN] or [SETUP] to cancel.
To select a channel
You can select a channel by directly entering channel using the Number buttons on the remote control.
Notes for using the Number buttons:
When selecting cable channels which are higher than 99, enter channel numbers as a three-digit
number.(For example: 117, press
[1], [1], [7])
You must precede single-digit channel numbers with a zero (For example: 02, 03, 04 and so on).
You can select the line input mode (“E1” or “E2”). To select “E1” by pressing
[0], [0], [1]. To select “E2” by
pressing
[0], [0], [2]. Details are on page 35.
Channel setting (cont’d)
Getting started
4
Select the channel number to
add or delete.
Press
[{] or [CHANNEL
-
] to
move to a lower channel number.
Press
[B] or [CHANNEL +] to
move to a higher channel number.
Press
the Number buttons to
select a channel number directly.
5
Using [K / L], select “Add” or
“Delete”. Press [OK].
The channel number will be
added or deleted from the channel
memory. Then the next channel
number will appear so that you
can continue adding or deleting
channels.
6
Press [SETUP] to exit.
Adding/deleting
channels
The channels you no longer
receive or seldom watch can
be deleted from the memory.
You also may add channels into
memory.
1
Press [SETUP].
2
Using [K / L], select “Channel”.
Press [OK].
Channel menu will appear.
3
Using [K / L], select “Manual
Channel Preset”. Press [OK].
Manual Channel Preset menu will
appear.
Manual Channel Preset
CH 2
Add
Delete
1
2
3
4
5
6
4
Manual Channel Preset
CH 7
Add
Delete
Note
[CHANNEL
-
/ +] works on
the memorized channel in this
unit.
[{ / B] works on all of
channel numbers.
4
20
EN
Selecting the TV stereo or SAP
Getting started
You can select a sound channel
to output from TV. “Stereo” has
been selected as the default.
1
Press [SETUP].
2
Using [K / L], select “Required
Settings”. Press [OK].
Required Settings menu will
appear.
3
Using [K / L], select “TV Audio
Select”. Press [OK].
Option window will appear.
4
Using [K / L], select “Stereo” or
“SAP”. Press [OK].
Stereo:
Outputs main-audio.
SAP (Secondary Audio Program):
Outputs sub-audio.
5
Press [SETUP] to exit.
1
2
3
4
5
Notes on TV channel audio
When you record a TV program available in second audio or
stereo, you have to select either Stereo or SAP in the Channel
Preset screen beforehand. Refer to the following table to check an
appropriate setting.
You can only play the disc in second audio if a TV program is
available in second audio and you set TV Audio Select ” to SAP ”.
TV Audio Select
SAP
Stereo
Selected
audio
Broadcast
audio
Disc
recording
Audio
output
Stereo STEREO+SAP STEREO STEREO
STEREO STEREO STEREO
MONO+SAP MONO MONO
MONO MONO MONO
SAP STEREO+SAP SAP SAP
STEREO STEREO STEREO
MONO+SAP SAP SAP
MONO MONO MONO
21
EN
Recording Playing discs
EditingBefore you start
Changing the
Setup menu Others
Español
Connections Getting started
Setting the clock
Getting started
Set the clock before you try the
Timer Programming. If a Public
Broadcasting Station (PBS) is
available in your area, follow
Auto
Clock Setting
below. If not, follow
Manual Clock Setting on page 22.
Auto Clock Setting
Make sure
The antenna/Cable TV
connections are correct.
If this unit is connected to a
Cable Box or Satellite Box,
select the local PBS station
on them to set the clock
automatically.
1
Press [SETUP].
2
Using [K / L], select “Clock”.
Press [OK].
Clock menu will appear.
3
Using [K / L], select “Auto
Clock Setting”. Press [OK].
Option window will appear.
4
If you do not know your PBS
channel number:
Using [
K / L], select “Auto”.
Press [OK].
The setting will be activated.
If you know your PBS channel
number:
Using [
K / L], select
“Manual”. Press [OK].
Using the Number buttons
or [K / L], enter your PBS
channel number. Press [OK].
The setting will be activated.
If you want to set the clock
manually and cancel the Auto
Clock Setting function: Using
[K / L], select “OFF” in “Auto
Clock Setting”. Press [OK].
The Auto Clock Setting function
will be canceled.
5
Press [SETUP] to exit.
6
Press [STANDBY-ON
] to turn
off the unit.
This unit will search for the time
only when the power is off. Leave
it off for several minutes to give
this unit time to set the clock.
Note
The clock may set itself
automatically after you
connect the antenna/cable
signal to this unit and plug in
the power cord.
2
3
4
6
1
5
Auto Clock Setting
OFF
Manual
Auto
Auto Clock Setting - Manual
CH 1
Set Channel No.
22
EN
Getting started
Manual Clock Setting
1
Press [SETUP].
2
Using [K / L], select “Clock”.
Press [OK].
3
Using [K / L], select “Clock
Setting”. Press [OK].
Clock Setting menu will appear.
Clock Setting
---- / -- / ---- ( ---- )
-- : -- --
Press [OK] again.
Default date will appear.
4
Using [K / L], enter the date
(month / day / year).
Press [{ / B] to move the cursor.
Clock Setting
JAN / 01 / 2006 ( SUN )
12: 00 AM
5
Using [K / L], enter the time
(hour / minute). Press [{ / B].
A cursor will move to AM.
Clock Setting
JAN/ 01 / 2006 ( SUN )
12: 00 AM
6
Press [K / L] to select “AM” or
“PM”. Press [OK].
Clock menu will appear, then the
settings will be activated.
Although seconds are not dis-
played, they begin counting from
zero.
7
Press [SETUP] to exit, if Clock
menu appears.
Note
Your clock setting will be lost if
either there is a power failure
or this unit has been unplugged
for more than 30 seconds when
you set the clock manually.
1
2
3
4
5
7
Setting the clock (cont’d)
6
23
EN
Recording Playing discs
EditingBefore you start
Changing the
Setup menu Others
Español
Connections Getting started
Getting started
Setting the clock (cont’d)
3
Using [K / L], select “Daylight
Saving Time”. Press [OK].
Option window will appear.
Daylight Saving Time
OFF
ON
4
Using [K / L], select “ON” or
“OFF”. Press [OK].
Select “ON” when currently
utilizing the daylight saving time.
5
Press [SETUP] to exit.
You can select the TV aspect ratio
to match the formats of what you
are playing with the unit and your
TV screen (4:3 standard or 16:9
widescreen TV).
“4:3 Letter Box” has been selected
as the default.
1
Press [SETUP].
2
Using [K / L], select “Required
Settings”. Press [OK].
Required Settings menu will
appear.
3
Using [K / L], select “TV
Aspect”. Press [OK].
Option window will appear.
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
TV Aspect
Refer to the Note on this page.
4
Using [K / L], select a desired
option. Press [OK].
5
Press [SETUP] to exit.
Note
If you have a standard TV:
Select “4:3 Letter Box”, so that
black bars appear on the top
and bottom of the screen when
playing wide-screen picture
and all that. Select “4:3 Pan &
Scan” for a full height picture
with both sides trimmed when
playing wide-screen picture
and all that.
If you have a widescreen TV:
Select “16:9 Wide”.
1
2
3
4
5
1
5
Selecting the TV aspect ratio
Setting the Daylight
Saving Time
When Daylight Saving Time is
ON, the unit clock will automati
-
cally move forward one hour on
the first Sunday in April and move
back one hour on the last Sunday
in October.
On has been selected as the
default.
1
Press [SETUP].
2
Using [K / L], select “Clock”.
Press [OK].
Clock menu will appear.
2
3
4
24
EN
Recording
Information
This unit can record to DVD+RW, DVD-RW, DVD+R
and DVD-R discs.
DVD+R/DVD-R discs can only be recorded to once.
DVD+RW/DVD-RW discs can be recorded to and
erased many times.
These discs are formatted with DVD+VR mode
automatically.
Discs other than DVD+VR mode cannot be recorded
in this unit.
Logo
Attributes
8cm/12cm, single-sided, single layer disc
Approx. max. recording time (SLP mode):
360 minutes (4.7GB) (for 12cm)
108 minutes (1.4GB) (for 8cm)
DVD+RW
DVD+R
8cm/12cm, single-sided, single layer disc
Approx. max. recording time (SLP mode):
360 minutes (4.7GB) (for 12cm)
108 minutes (1.4GB) (for 8cm)
DVD-RW
DVD-R
Recordable disc
DVD+R 1x-16x, DVD+RW 1x-4x, DVD-R 8x/16x,
and DVD-RW 4x discs can be used in this
recorder.
We strongly recommend for good recording quality:
TDK DVD+R 4x/8x/16x, SONY DVD+R 4x/8x/16x,
MAXELL DVD+R 4x/8x/16x, SONY DVD+RW 4x,
MAXELL DVD-R 8x/16x, MAXELL DVD-RW 4x
Discs that have been tested and are proven to be
compatible with this recorder:
VERBATIM DVD+R 8x
VERBATIM DVD+RW 4x
VERBATIM DVD-R 8x
VERBATIM DVD-RW 2x
MAXELL DVD-R 16x
JVC DVD-RW 4x
You can play DVD+RW in most DVD players
without finalizing. To play discs other than
DVD+RW in other DVD players, you will need to
finalize.
Recording mode
You can select a recording mode among 6 options,
and the recording time will depend on the recording
mode you select as follows.
Recording
mode
Recording
time
Video/Sound
Quality
Disc Size
8cm Disc
60 min
120 min
150 min
180 min
240 min
360 min
12cm Disc
(poor)
(poor)
(good)
(good)
HQ (1Hr)
SP (2Hr)
SPP (2.5Hr)
LP (3Hr)
EP (4Hr)
SLP (6Hr)
18 min
36 min
45 min
54 min
72 min
108 min
HQ (1Hr)
SP (2Hr)
SPP (2.5Hr)
LP (3Hr)
EP (4Hr)
SLP (6Hr)
The recording time are estimates and actual
recording time may differ.
The audio and video quality is getting poorer as the
Recording time becomes longer.
Each time
[REC MODE] is pressed, recording
mode and its allowed recording time will be
displayed.
Note
This recorder cannot record CD-R or CD-RW
discs.
DVD+R/RW, DVD-R/RW and CD-R/RW discs
recorded on a personal computer or a DVD or
CD recorder may not play if the disc is damaged
or dirty or if there is dirt of condensation on the
player’s lens.
If you record a disc using a personal computer,
even if it is recorded in a compatible format, there
are cases in which it may not play because of the
settings of the application software used to create
the disc. (Check with the software publisher for
more detailed information.)
DVD-R/RW discs recorded in Video mode cannot be
recorded additionally using the unit.
Since the recording is made by the variable bit
rate (VBR) method, depending on the picture
you are recording, the actual remaining time
for recording may be a little shorter than the
remaining time displayed on the OSD.
You cannot record copy-protected video using
this unit. (Copy-protected video includes DVD-
Video discs and some satellite broadcasts.)
You cannot record videos that includes “copy-
once only” signal.
Information on DVD recording
25
EN
Playing discs
EditingBefore you start
Changing the
Setup menu Others
Español
Connections RecordingGetting started
Recording
Making discs playable in other DVD player (Finalize/Make Edits Compatible)
After recording on DVD+R/DVD-R/DVD-RW, you must finalize the disc in order to play on other units. (Refer to
page 36.)
There is no need to finalize DVD+RW discs but to “Make Edits Compatible” (refer to page 62) for playing on
other units after editing.
This Unit DVD player
Not Playable
Playable
DVD-R/DVD-RW
DVD+R
DVD+RW
Not finalized
Not performing Make Edits Compatible after editing titles
ᵤᶇᶌᵿᶊᶇᶘᶇᶌᶅᵈ
ᵤᶇᶌᵿᶊᶇᶘᶇᶌᶅᵈ
ᵫᵿᶉᶃᴾᵣᶂᶇᶒᶑᴾᵡᶍᶋᶎᵿᶒᶇᶀᶊᶃᵈ
ᵫᵿᶉᶃᴾᵣᶂᶇᶒᶑᴾᵡᶍᶋᶎᵿᶒᶇᶀᶊᶃᵈ
ᵈᵷᶍᶓᴾᶁᵿᶌᶌᶍᶒᴾᶄᶇᶌᵿᶊᶇᶘᶃᴾᶍᶐᴾᵫᵿᶉᶃᴾᵣᶂᶇᶒᶑᴾᵡᶍᶋᶎᵿᶒᶇᶀᶊᶃᴾᶇᶌᴾᶍᶒᶆᶃᶐᴾᵢᵴᵢᴾᶐᶃᶁᶍᶐᶂᶃᶐᶑᵌ
Editing titles
Once DVD+R/DVD-R/DVD-RW discs are finalized, you cannot record additionally or edit.
You cannot record additionally or edit on finalized DVD-RW discs unless the DVD-RW discs are performed
“Undo Finalize”.
Information on DVD recording (cont’d)
26
EN
Recording
Before recording
It can be used to prohibit recording
additionally or to replace the title
list after recording when inserting
the disc includes titles and a
different type of title list recorded
by other units. “OFF” has been
selected as the default.
1
Press [SETUP].
2
Using [K / L], select
“Recording”. Press [OK].
Recording menu will appear.
3
Using [K / L], select “Replace
Disc Menu”. Press [OK].
Replacing disc menu
1
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
Setting for Auto Chapter
5
1
2
3
4
5
2
3
4
Note
The interval for auto chapter
marks may slightly deviate
from the one you specified on
the Auto chapter screen.
A blank chapter may be
created depending on the
remaining time of the disc.
Auto Chapter
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
OFF
You can set a specified time for
chapter marks.
1
Press [SETUP].
2
Using [K / L], select “Recording.
Press [OK].
3
Using [K / L], select “Auto
Chapter”. Press [OK].
Option window will appear.
4
Using [K / L], select a desired
time option. Press [OK].
5
Press [SETUP] to exit.
Option window will appear.
4
Using [K / L], select “ON” or
“OFF”. Press [OK].
ON: Replacing the title list
OFF: Prohibiting additional record
5
Press [SETUP] to exit.
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
Replace Disc Menu
OFF
ON
27
EN
Playing discs
EditingBefore you start
Changing the
Setup menu Others
Español
Connections RecordingGetting started
Recording
Note
Recording starts immediately
and continues until the disc is
full or you stop recording.
When the unit clock has not
been set, the space for a date
and time of title names will be
blank.
When you record a TV
program which has Stereo
and SAP audio, you have to
select the TV channel audio
(Stereo or SAP) beforehand.
Only the selected channel
audio will be recorded. Refer
to “Selecting the TV stereo
or SAP” on page 20 for more
details.
You cannot change the
recording mode during the
REC pause mode.
You can change a channel
during the REC pause mode.
Follow the steps below to record
TV programs.
1
Press [STANDBY-ON
].
Turn the TV on and be sure to
select the input to which the unit is
connected.
2
Press [OPEN/CLOSE A].
The disc tray will open.
3
Insert your disc with its label
facing up. Align the disc to the
disc tray guide.
4
Press [OPEN/CLOSE A] to
close the disc tray.
When inserting a brand-new
DVD+RW/DVD-RW disc, the
unit automatically starts to
format.
If titles have been recorded on the
disc, the title list is displayed. Press
[STOP C] to exit the title list.
5
Using [REC MODE], select a
recording mode.
Refer to “Recording mode” on
page 24.
6
Using [CHANNEL
-
/ +] or
the Number buttons, select a
desired channel to record.
7
6
7
8
CH 12
HQ (1Hr) 0:58
I
This operation may take a
while to be completed.
Basic recording
1
6
5
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
7
Press [REC I] to start record-
ing.
Imark will be displayed for 5
seconds.
Press
[PAUSE F] to pause
recording. Press
[PAUSE F]
or [REC I] again to restart
recording.
8
Press [STOP C] to stop record-
ing.
The recorded title will be on the
displayed title list. (Refer to “Guide
to a title list” on page 51.)
Press [STOP
C
] to exit the title list.
disc tray
guide
2
4
Writing to Disc 90%
1 SP (2Hr)
2
ENPTY TITLE
1:41:17
SP (2Hr)
NOV/21/06 11:00
AM
CH12 SP
NOV/21/06 0:20:44
28
EN
Recording
Note
Press [DISPLAY] to see the
remaining recording time on
the TV screen during a One-
touch Timer Recording.
You cannot pause a One-
touch Timer Recording.
Unlike a Timer Recording,
you can perform the following
operations during a One-touch
Timer Recording.
-Turning the power off.
-Using
[REC I] and
[STOP C].
The unit will be turned off
automatically under the
following conditions.
1) No space remained on the
disc.
2) When a power failure occurs.
This is a simple way to set the
recording time in blocks of 30
minutes. Check that the disc you
are recording onto has enough
space for the time you set.
When the recording finishes the
recorder automatically goes into
standby mode.
1
Turn on the unit and load a
recordable disc.
Make sure that the TV input is set
on the unit.
2
Using [REC MODE], select a
recording mode.
Refer to “Recording mode” on
page 24.
3
Using [CHANNEL
-
/ +] or
the Number buttons, select a
desired channel to record.
4
Press [REC I] repeatedly to
select desired recording time.
Recording times appear on the TV
screen (30 minutes to 8 hours).
Recording will start.
When the unit reaches the
specified time, it will be turned off
automatically.
To change the recording length
during the One-touch Timer
Recording, press
[REC I]
repeatedly until the desired length
appear.
To cancel the One-touch Timer
Recording within the specified
time, press
[STOP C] .
3
4
This operation may take a
while to be recognized.
0:30
(Normal Recording)
8:00 7:30
1:00
I
0:30
This operation may take a
while to be completed.
One-touch Timer Recording
4
3
2
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
1 1
29
EN
Playing discs
EditingBefore you start
Changing the
Setup menu Others
Español
Connections RecordingGetting started
Recording
You can program the unit to record
up to 8 programs within a month in
advance. Daily or weekly program
recordings are also available.
Be sure to set the clock before
setting a timer programming.
Insert a recordable disc.
1
Press [TIMER PROG.].
Timer Programming list will appear.
2
Using [K / L], select a program
number. Press [OK].
3
Using [K / L], enter the Date.
Press [B].
4
Using [K / L], enter the Start
and End time. Press [B].
5
Using [K / L], select the CH
number to record. Press [B].
To record from external input,
select E1 or E2.
6
Using [K / L], select a recording
mode.
Refer to “Recording mode” on
page 24.
When “Auto” is selected as
a recording mode, the unit
determines how much time is
available on the disc and record in
the appropriate recording mode to
complete recording the program.
Note
If you have not set the
clock yet:
A manual clock setting menu
will appear instead of the
Timer Programming list at
step 1. Continue with the step
3 in “Manual Clock Setting”
on page 22 before setting a
timer programming.
Press
[s / B] to move the
cursor to the left and the right
in the timer programming
menu.
After step 8, the recording will
start immediately after the
recording time you set.
1
2
3
4
5
6
Timer Programming
2. ---
3. ---
4. ---
5. ---
6. ---
7. ---
8. ---
1. JAN/01 12:57AM --:-- E1
Date Start End CH Mode
Timer Programming
2. ---
3. ---
4. ---
5. ---
6. ---
7. ---
8. ---
1. JAN/01 --:-- --:-- E1
Date Start End CH Mode
Timer Programming
2. ---
3. ---
4. ---
5. ---
6. ---
7. ---
8. ---
1. ---
Date Start End CH Mode
When pressing [L] at the
current date, the Date will
change as follows.
Daily
MON-SAT
JAN/01
JAN/31
MON-FRI
SAT
FRI
SUN
Timer Programming
2. ---
3. ---
4. ---
5. ---
6. ---
7. ---
8. ---
1. JAN/01 12:57AM 1:57AM CH 8 Auto
Date Start End CH Mode
Timer Recording
e.g. January 1st
7
Press [OK] when all items are
entered.
Your program setting will be
stored.
To set another program, repeat
steps 2 to 7.
To exit, press
[TIMER PROG.]
or [SETUP].
When two or more programs are
overlapped, “Overlap” and the
overlapped program number will
appear.
8
Press [STANDBY-ON
] to set
a Timer Programming.
TIMER REC
indicator will be on.
7
7
8
Timer Programming
2. ---
3. ---
4. ---
5. ---
6. ---
7. ---
8. ---
1. JAN/01 12:57AM 1:57AM CH 8
Date Start End CH Mode
Timer Programming
2. ---
3. ---
4. ---
5. ---
6. ---
7. ---
8. ---
1. JAN/01 12:57AM 1:57AM CH 8 HQ
Date Start End CH Mode
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
30
EN
Checking, canceling, or correcting the timer programming
information
Recording
1
Press [STANDBY-ON
].
TIMER REC indicator will be off.
2
Press [TIMER PROG.].
Timer Programming list will appear.
3
Check the information on the
list you will need.
4
To clear the timer programming:
Using [K / L], select the
program. Press [CLEAR].
To correct the timer program-
ming:
Using [K / L], select your desired
program. Press [OK].
Next, correct the timer
programming by using [K / L / {
/ B]. Finally, press [OK] again.
5
Press [TIMER PROG.] to exit.
6
Press [STANDBY-ON
] to
return to the timer standby
mode.
Note
Press [TIMER PROG.] to
check the timer programming
in process.
When the Timer Recording is
proceeding, that program will
be highlighted with red. In this
case, you cannot select any
other program.
2
5
6
4
1
Press [CLEAR] to erase the
selected program.
Each error number means:
Timer Programming
2. ---
3. ---
4. ---
5. ---
6. ---
7. ---
8. ---
1. JAN/01 12:57AM 1:57AM CH 8 HQ
Date Start End CH Mode
To stop the Timer Recording in process
Press [STOP C] on the front panel of the unit.
[STOP C] on the remote control is not effective.
If the timer program did not complete correctly, the error number
appears in the Timer Programming list.
Timer Programming
2. ---
3. ---
4. ---
5. ---
6. ---
7. ---
8. ---
*
JAN/01 12:57AM 1:57AM CH 8 E22
Date Start End CH Mode
A program with the error number is grayed and asterisked in the Timer Programming list.
Once the Timer Programming list with error line(s) is displayed, or after canceling and setting again the timer
standby mode, the program line(s) with error will be cleared.
Timer Recording (cont’d)
E1-22
E37-39
Recording error other than
below
E41 Power failed
E23-24 Unrecordable disc E42 No disc when recording
E25-26 Copy prohibited program
E29 Disc protected E43 Already 49 titles recorded
E30 Disc full E44 Already 254 chapters
recorded
E34 No space for Control
information
E35 PCA full E45 Copy prohibited program
E36 Already finalized Video
format disc
E46 It is impossible to record
additionally on a disc
recorded by other units
when setting Replace Disc
Menu to OFF.
E40 Some portion has not
been recorded because
of program overlapping.
Recording did not start at
the start time.
E27,E28,E31,E32 and E33 are not displayed.
31
EN
Playing discs
EditingBefore you start
Changing the
Setup menu Others
Español
Connections RecordingGetting started
Recording
Hints for Timer Recording
Note for DVD recording
PROG. A
PROG. B
Actual
recording
The first 30 seconds (at the longest) will be cut off.
PROG. BPROG. A
When the End time of the programming
currently being recorded and the Start time
of the subsequent program are same:
If PROG. A is a DVD recording program, the
beginning of the PROG. B may be cut off.
When the recording time of two programs
are overlapped, or the End time of a
program and the Start time of another
program is the same, the first 30 seconds
(at the longest) of the subsequent program
will be cut off.
If the cut-off portion comes up to one
minute or more, this program will be
displayed with error number E40 in the
timer programming list.
The priority of overlapped settings
PROG. A
PROG. B
Actual
recording
PROG. A
PROG. B
A programming set previously has priority
When the starting time is the same:
A program set previously (PROG. A) has priority.
The first 30 seconds (at the longest) will be cut off.
PROG. A
PROG. B
Actual
recording
PROG. A
PROG. B
PROG. C
When some programming have been made at
the end time of the programming currently
being recorded:
A program set previously (PROG. B) has priority.
The first 30 seconds (at the longest) will be cut off.
PROG. A
PROG. B
Actual
recording
PROG.B PROG.A
When the recording time is partially overlapped:
PROG. A will start after PROG. B is complete to
be recorded.
The first 30 seconds (at the longest) will be cut off.
PROG. A
PROG. B
Actual
recording
PROG. B
When the recording time is entirely overlapped:
PROG.A will not be recorded.
If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and
all timer programming will be lost.
If a disc is not on the tray, TIMER REC
indicator flashes and Timer Recording cannot be performed. In
some cases, TIMER REC
indicator will be on momentarily around the start point as the unit attempts to
record. Please insert a recordable disc.
When all the Timer Recording is completed, TIMER REC indicator flashes. To play or eject the recorded disc,
press
[STANDBY-ON
] first, then select the recorded title and press [PLAY B] or [OPEN/CLOSE A].
During Timer Recording or timer standby mode (TIMER REC indicator will be on), any operations on the
unit will not be available. To make these operations available, cancel the Timer Recording or timer standby
mode first (TIMER REC
indicator will be off).
To cancel the timer standby mode, press
[STANDBY-ON
].
When the Start and the End time are the same, the length of the recording will be set for 24 hours. When
the disc reaches at the end during the recording, the unit turns itself off.
When the programmed Start and End time are earlier than the current time, the setting will not be accepted
and be cleared for redoing.
If the Start time is earlier and the End time is later than the current time, the recording will start right after
you turn the power off.
This unit records the programs according to priority if the timer programmings are overlapped. The timer
programming set previously has priority.
A Timer Recording of lower priority will be canceled, start from the middle or stop on the way.
Check the overlapped timer programmings and change the priority if necessary.
Timer Recording (cont’d)
32
EN
Recording
DVD+
RW
DVD+
RW
DVD-RW
DVD-RW
+VR
You can overwrite the existing title
from the beginning.
1
Turn on the unit.
Make sure that the TV input is set
on the unit.
2
Load the disc that includes a
title to be overwritten.
Title list will appear.
If the title list does not appear,
press
[DISC MENU].
3
Using [REC MODE], select a
recording mode.
Refer to “Recording mode” on page 24.
4
Using [K / L], select a title to be
overwritten. Press [OK].
5
Using [K / L], select
“Overwrite”. Press [OK].
Channel can be changed.
I
SP(2Hr) 2:00
CH 12
DVD+RW
1 1 0:00:00
Selected title number
to be overwritten
6
Press [REC I].
Overwriting recording starts.
The elapsed-time counter starts running.
7
Press [STOP C] to stop recording.
Title name is also overwritten.
2
4
5
6
7
Overwriting an existing title
1
This operation may take a
while to be recognized.
Overwriting from the beginning of the title
DVD+
RW
DVD+
RW
DVD-RW
DVD-RW
+VR
You can overwrite the existing title
from the selected position.
1
Proceed to steps 1 to 2 above.
2
Using [K / L], select a title to be
overwritten. Press [OK].
3
Using [K / L], select “Play”.
Press [OK].
Playback will start.
4
Press [PAUSE F] at the point
from which you want to start
overwriting.
5
Press [REC
I
].
F I
” mark, Display menu, CH, and
the time lapse will be displayed as
stated above.
Channel can be changed.
6
Press [REC I] again.
Overwriting recording starts.
7
Press [STOP C] to stop
recording.
Title name is not overwritten.
Overwriting in the middle of the title
2
4
5
6
7
Note
Recording mode of the
overwriting title is the
same as that of the original
(overwritten) title when
overwriting in the middle of
the title.
1 SP (2Hr)
2
3
NOV/21/06 11:00
AM
CH12 SP
NOV/21/06 0:20:44
NOV/22/06 11:35
AM
CH13 EP
NOV/22/06 0:10:33
EMPTY TITLE
3:15:44 EP(4Hr)
Ed i t
Ov e rw r ite
Pl a y
This operation may take a
while to be recognized.
This operation may take a
while to be recognized.
3
1 SP (2Hr)
2
3
NOV/21/06 11:00
AM
CH12 SP
NOV/21/06 0:20:44
NOV/22/06 11:35
AM
CH13 EP
NOV/22/06 0:10:33
EMPTY TITLE
1:37:52 SP(2Hr)
Note
Remaining time, which is
displayed on the bottom right
corner of the screen during
overwriting, indicates the
remaining time at the time of
starting overwriting.
2
3
33
EN
Playing discs
EditingBefore you start
Changing the
Setup menu Others
Español
Connections RecordingGetting started
Note
When a title name is overwritten,
its thumbnail is also overwritten.
When existing title is longer than
the overwriting title, overwriting title
is divided into 2 titles. If this is the
case, there may be an unrecorded
portion between titles.
A chapter mark is put between titles
when overwriting in the middle of
the title.
“Auto Chapter” interval time is reset
at the overwriting start point.
Recording
Overwriting an existing title (cont’d)
Hints for Overwriting
Overwriting Title (A)
Existing Title (B)
After overwriting
PROG. A
When overwriting title is shorter than the existing title:
(Overwriting from the beginning of the title)
Title name: A
Title name: B
Title name: A
Title name: B
30 - 180 seconds will be cut off.
Overwriting Title (A)
Existing Title (B)
After overwriting
PROG. A
When overwriting title is longer than the existing title:
(Overwriting from the beginning of the title)
Title name: A
Title name: B
Title name: A
Overwriting Title (A)
Existing Title (B)
After overwriting
When overwriting in the middle of the title:
Title name: B
30 - 180 seconds will be cut off.
Title name: B
Title name: A
Title name: B
When an existing title is overwritten, the title name may be changed according to the overwriting situations.
Before overwriting, read the following cases and Note.
Overwriting Title (A)
Existing Title (B)
Existing Title (C)
After overwriting
PROG. A
Title name: A
Title name: B
Title name: A
30 - 180 seconds will be cut off.
Title name: C
Title name: C
34
EN
Recording
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
Connect the external source properly to the unit by using input jacks either EXT2 (Front) or EXT1 (Rear).
When connecting an external equipment of monaural output to this unit, use AUDIO L jack of EXT2 (Front).
Use commercially available S-Video or Video cable and an Audio cable for this connection.
Connection to an external source
4. Using [K / L], select “E2 (Front)”. Press [OK].
5. Using [
K / L], select the input jack type to
connect. Press [OK].
If you want to use S-VIDEO input jack, select “S-
Video In”.
If you want to use VIDEO input (Composite) jack,
select “Video In”.
6. Press [SETUP] to exit.
4. Using [
K / L], select “E1 (Rear)”. Press [OK].
5. Using [
K / L], select the input jack type to
connect. Press [OK].
If you want to use S-VIDEO IN jack, select “S-
Video In”.
If you want to use VIDEO IN (Composite) jack,
select “Video In”.
6. Press [SETUP] to exit.
1. Press [SETUP].
2. Using [
K / L], select “Required Settings”. Press [OK].
3. Using [
K / L], select “Video Input”. Press [OK].
Front of this unit
Rear of this unit
ANTENNA
AUDIO IN
VIDEO IN
L
R
AUDIO OUT
VIDEO OUT
(E1)
IN
IN
OUT
OUT
S-VIDEO
COMPONENT
VIDEO OUTPUT
L
Y
P
B
/C
B
P
R
/C
R
R
DIGITAL AUDIO OUTPUT
PCM / BITSTREAM
COAXIAL
To EXT 2 IN To EXT 1 IN
Another source
(VCR camcorder etc.)
VIDEOS- VIDEO AUDIO
RL
OUTPUT
VIDEO S -VIDEOAUDIO
LR
OUTPUT
S-Video
cable
Audio
cable
Video
cable
or
AUDIO IN
VIDEO IN
L
R
IN
S-VIDEO
Audio
cable
S-Video
cable
Video
cable
or
or
Video Input
E2 (Front) Video In
E1 (Rear) Video In
Video Input
E2 (Front) S-Video In
E1 (Rear) Video In
Video Input
E2 (Front) Video In
E1 (Rear) S-Video In
Video Input - E2 (Front)
S-Video In
Video In
Settings for an external source
Video Input - E1 (Rear)
S-Video In
Video In
35
EN
Playing discs
EditingBefore you start
Changing the
Setup menu Others
Español
Connections RecordingGetting started
To prevent accidental recording,
editing or erasing the titles, you
can protect them from the Setting
menu.
1
Press [SETUP].
2
Using [K / L], select “Disc Edit”.
Press [OK].
Disc menu will appear.
3
Using [K / L], select “Disc
Protect OFF ON”. Press [OK].
Confirmation window will appear.
4
Using [K / L], select “Yes”.
Press [OK].
A disc will be protected.
Recording
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
Before recording from an external source, see the instructions for the
connection on page 34.
Recording from an external source
1. Turn the TV and this unit on, and be sure to select the input of the
TV to which the unit is connected.
Refer to the table on page 13.
2. Press [OPEN/CLOSE
A] to open the disc tray. Place the disc to
record properly.
3. Press [OPEN/CLOSE
A] to close the disc tray.
4. Select the input of the unit which the external equipment is
connected. (E2 or E1)
To use the input jacks on the back of this unit, select “E1 (Rear)”
position by pressing
[0], [0], [1] with the Number buttons on the remote
control.
To use the input jacks on the front of this unit, select “E2 (Front)”
position by pressing
[0], [0], [2] with the Number buttons on the remote
control.
5. Select a recording mode by pressing [REC
MODE].
Refer to “Recording mode” on page 24.
6. Press [RECORD
I] on the unit to start
recording.
7. Press “Play” on the external source to record from.
8. Press [STOP
C] on the unit to stop recording.
4
Setting a disc to protect
1
2
3
4
Note
To cancel the disc protect:
When you insert a disc
protected with this unit,
Disc Protect ON OFF will
appear instead ofOFF
ON”.
To release the protect for the
disc, select “Disc Protect
ON OFF” at step 3, then
select “Yes”.
This operation may take a while to be recognized.
HQ
SP
SPP
LP
EPSLP
(1Hr)
(2Hr) (2.5Hr)
(3Hr)(4Hr)
(6Hr)
This operation may take a while to be completed.
No
Yes
Disc Protect OFF ON
No
Yes
Disc Protect ON OFF
Settings for an external source (cont’d)
5
6 832
This operation may take
a while to be completed.
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
1 2
3
1
36
EN
Recording
Note
Once you have finalized a
disc recorded on DVD
+R/
DVD-R, you cannot edit or
record anything on that disc.
There is no need to finalize
DVD+RW discs.
When you insert a DVD-RW
disc finalized with this unit,
“Undo Finalize” will appear
instead of “Finalize”.
To release the finalizing
for the disc, select “Undo
Finalize” at step 3.
* DO NOT power off during
finalization, this will result in
malfunction.
DVD+RDVD+R
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
You will need to finalize discs to
play in other DVD players.
Finalizing may take several
minutes up to an hour.
A shorter recording period on
the disc will require a longer time
period for finalization. Do not
unplug the power cord during
finalization.
Details are on page 25.
1
Press [SETUP].
2
Using [K / L], select “Disc Edit”.
Press [OK].
Disc menu will appear.
3
Using [K / L], select “Finalize”.
Press [OK].
Confirmation window will appear.
4
Using [K / L], select “Yes”.
Press [OK].
Finalizing will start.
5
Finalizing is completed.
1
4
2
3
4
Finalizing 100%
Finalizing 90%
Finalize
No
Yes
To cancel finalizing...
(DVD-RW only)
To cancel finalizing at step 4,
press [STOP C], select “Yes”
with
[{ / B], then press [OK].
Finalizing is cancelled and the
unit will be in stop mode.
If appears when pressing
[STOP C], you cannot cancel
finalizing because the finalizing
has been in certain progress.
When selecting “No” and press
[OK] or [RETURN] , finalizing
will be continued.
You cannot cancel finalizing the
DVD+R/DVD-R disc once it has
started.
Finalizing 5%
Do you want to cancel ?
Yes No
Disc Edit
Edit Disc Name
Erase Disc
Undo Finalize
Disc Protect OFF ON
Playing the discs in other DVD players
Finalizing a disc
This operation may take a
while to be completed.
37
EN
Playing discs
EditingBefore you start
Changing the
Setup menu Others
Español
Connections RecordingGetting started
Recording
6
2
3
4
5
DVD+RDVD+R
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
You can finalize discs
automatically using Auto Finalize
function. You can use this function
to finalize discs after finishing all
Timer Recordings and at the end
of the disc space.
1
Press [SETUP].
2
Using [K / L], select
“Recording”. Press [OK].
Recording menu will appear.
3
Using [K / L], select “Auto
Finalize”. Press [OK].
Auto Finalize menu will appear.
4
Using [K / L], select “Disc Full”
or “End of Timer Rec”. Press
[OK].
Option window will appear.
5
Using [K / L], select “ON”.
Press [OK].
Your setting will be activated.
6
Press [SETUP] to exit.
Auto finalizing
1
Auto Finalize - End of Timer Rec
OFF
ON
Auto Finalize
End of Timer Rec OFF
Disc Full OFF
Auto Finalize - Disc Full
OFF
ON
Playing the discs in other DVD players (cont’d)
38
EN
Playing discs
Before you play DVD discs, read the following information.
Guide to displays
Playable discs
This unit is compatible to play the following discs.
To play a DVD, make sure that it meets the
requirements for Region Codes and Color Systems
as described below. Discs that have the following
logos will play on the unit. Other disc types are not
guaranteed to play.
Color systems
DVDs are recorded in different color systems throughout
the world. The most common color system is NTSC (which
is used primarily in the United States and Canada).
This unit uses NTSC, so DVDs you play must be recorded
in the NTSC system. You cannot play DVDs recorded in
other color system .
Region codes
This unit has been designed to play DVD discs
with Region One (1). DVDs must be labeled for
ALL regions or for Region 1 in order to play on the
unit. You cannot play DVDs that are labeled for
other regions. Look for the symbols on the right on
your DVDs. If these region symbols do not appear
on your DVD, you cannot play the DVD in this unit.
The number inside the globe refers to region of the world.
A DVD labeled for a specific region can only play on the
unit with the same region code.
PBC (Playback Control) for Video CD
This unit conforms to ver.1.1 and ver. 2.0 of Video CD
standard with PBC function.
Ver.1.1 (without PBC function): You can enjoy playback
picture as well as music CD.
Ver.2.0 (with PBC function): While using a Video CD with
PBC function, “PBC” appears on the screen.
NOTE: When playing Video CDs with PBC function, some
operations (e.g., track search and repeat tracks) cannot
be performed. Cancel PBC function temporarily to perform
those operations (refer to page 70).
Hint for DVD playback
The contents of DVD disc are generally divided into titles.
Titles may be further subdivided into chapters.
LogoDisc
DVD-RW
(VIDEO mode, Finalized)
DVD-R
(VIDEO mode, Finalized)
CD-DA (AUDIO CD)
Video CD
CD-R (CD-DA FORMAT,
MP3 files)
CD-RW (CD-DA FORMAT,
MP3 files)
DVD-VIDEO
DVD+RW
DVD+R
DVD+R Double Layer
Track 1 Track 2 Track 3 Track 4 Track 5
Start Rec. Stop/Start Stop Rec.
Start Rec. Stop Rec.
Title 1 Title 2
Chapter 1 Chapter 1Chapter 2 Chapter 3 Chapter 2
is a trademark of DVD Format/Logo Licensing Corporation.
Information on DVD play
Press [DISPLAY] to call up the
Display menu. This menu will
give you the information on the
playing disc. Some operations are
available while disc is playing.
1. Indicates a disc type and a
format mode. (Format mode is
displayed with DVD-RW/DVD-R
(Video mode) discs inserted.)
NOTE: In some descriptions on
this manual, only one disc type
is indicated as an example.
2. Indicates a channel number.
3. Indicates a recording mode and
possible recording time left.
4. Indicates a title number, chapter
number and the time lapse of
disc play.
5.
Each icon means:
6. Indicates current disc status.
: Search
: Audio
: Subtitle
: Angle
: Repeat
: Marker
: Noise Reduction
: Zoom
: Surround
DVD+RW
1 1 0:00:00
CH 2
14
5 25 2
6
HQ(1Hr) 1:01
33
You can play interactive software using menu screens.
Refer to instructions in the Video CD.
1
Press [STANDBY-ON
].
Turn the TV on and be sure to
select the input to which the unit is
connected.
2
Press [OPEN/CLOSE A] .
The disc tray will open.
3
Insert your disc with its label fac-
ing up. Align the disc to the disc
tray guide.
4
Press [OPEN/CLOSE A] to close
the disc tray.
Title list will appear automatically.
If you want to return to the
playback while you are stopping
temporarily, press [TITLE] to
resume play.
To exit the title list, press
[STOP C].
5
Using [K / L], select a desired
title. Press [OK].
Pop-up window will appear.
If you want to see Disc
information, press [{ ] when
the first page of the title list is
displayed or press [ K ] when
the first title is selected but
“Play”, “Edit” or “Overwrite” is not
highlighted.
<DVD+RW>
<DVD+R/DVD-RW/DVD-R>
6
Using [K / L], select “Play”.
Press [OK].
Playback will start.
7
Press [STOP C] to stop play-
back.
To eject the disc, press [OPEN/
CLOSE A] to open the disc tray,
then remove the disc before
turning the unit off.
No Disc Name
Disc DVD+RW
Total Titles 3
Disc Space Used 0:30:48
Disc Protect OFF
Make Edits Compatible Needed
No Disc Name
Disc DVD+R
Total Titles 5
Disc Space Used 1:30:48
Disc Protect OFF
Finalize Finalized
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
39
EN
EditingBefore you start
Changing the
Setup menu Others
Español
Connections Getting started
Recording Playing discs
Playing discs
4
7
1
2
4
5
7
Basic playback
6
4
Playback
This operation may take a
while to be recognized.
disc tray
guide
1 SP (2Hr)
2
3
NOV/21/06 11:00
AM
CH12 SP
NOV/21/06 0:20:44
NOV/22/06 11:35
AM
CH13 EP
NOV/22/06 0:10:33
EMPTY TITLE
1:37:52 SP(2Hr)
Ed i t
Ov e rw r ite
Pl a y
6
1 SP (2Hr)
2
3
NOV/21/06 11:00
AM
CH12 SP
NOV/21/06 0:20:44
NOV/22/06 11:35
AM
CH13 EP
NOV/22/06 0:10:33
EMPTY TITLE
1:37:52 SP(2Hr)
Note
Some discs may start
playback automatically.
You can also start playback
by pressing [PLAY B]
instead of [OK] at step 5.
Press
[B] to display the
next page, and press [{] to
display the previous page.
1. Disc name
(Default “No Disc Name”)
2. Disc Type
(DVD+RW/DVD+R/DVD-RW/
DVD-R)
3. Total number of title
(include “Empty Title”)
4. Total time of recorded disc
space
5. Status of disc protection
(“ON” is protected disc.)
6. Making edits compatible/
Finalize
• When DVD+RW disc is
inserted:
If edit for which “Make Edits
Compatible” is necessary is
done, “Needed” is displayed.
“Not Needed” is not necessary.
• When DVD+R, DVD-RW or
DVD-R disc is inserted:
If “Finalize” is done, “Finalized”
is displayed. Otherwise,
“Unfinalized” is displayed.
40
EN
1
In stop mode, press [TITLE] to call
up the MP3 menu.
To exit the menu, press
[TITLE]
again.
2
Press [K / L] to select a desired
folder (group) or track. Press
[OK].
When selecting track:
Playback will start.
When selecting the folder:
The files in folder will appear.
Press [K / L] to select the track or
folder you want, then press [OK].
Press
[PLAY B], [OK] or [B] to
move to the lower hierarchies.
Press
[s] or [RETURN] to the
previous hierarchy.
Hints for MP3 files:
Folders are known as Groups,
files are known as Tracks.
Folders are accompanied by
icon.
MP3 files are accompanied by
3
icon.
Reproduction will start from the
selected track and go to the next
one in turn.
The system can recognize up to
255 groups (or folders) and up
to 999 tracks.
The name of group and track
can be displayed in up to 29
characters. Unrecognizable
characters will be replaced with
asterisks.
If there are no files in the folder,
“No Files” will be displayed.
We recommends the files record-
ed under the following
circumstances is played back:
Sampling frequency: 44.1kHz or
48kHz.
Constant bit rate: 112kbps -
320kbps.
Playing discs
1
Press [STANDBY-ON
].
Turn the TV on and be sure to
select the input to which the unit is
connected.
2
Press [OPEN/CLOSE A] to open
the disc tray.
The disc tray will open.
3
Insert your disc with its label fac-
ing up. Align the disc to the disc
tray guide.
4
Press [PLAY B] to start play-
back.
Playback will start.
If you are playing a DVD-Video
disc or Video CD with PBC
function, a menu may appear.
Refer to page 41 for details about
a disc menu.
If you are playing a finalized DVD-
R/DVD-RW disc, a title list will
appear.
5
Press [STOP C] to stop play-
back.
Note
Some discs may start
playback automatically.
You can select images or
information on the menu
screen by activating PBC
(Playback control) function
(page 70).
Note
The audio source of MP3 files
cannot be recorded as digital
sound by an MD or DAT
deck.
Files whose extension is other
than “.mp3(MP3)” will not be
listed in the MP3 menu.
Some unplayable folders
or tracks may be listed in
the MP3 menu due to the
recording status.
1
2
5
4
1
2
Playing MP3 disc
File List
DISC NAME
FOLDER NAME 1
FOLDER NAME 2
FOLDER NAME 3
FOLDER NAME 4
FOLDER NAME 5
FOLDER NAME 6
1 FILE NAME 1
2 FILE NAME 2
1/2
3
3
Basic playback (cont’d)
DVD-VDVD-VDVD-VDVD-V
DVD-RDVD-R
Video
DVD-RWDVD-RW
Video
CD
CD
Video CDVideo CD
MP3
MP3
41
EN
EditingBefore you start
Changing the
Setup menu Others
Español
Connections Getting started
Recording Playing discs
A DVD disc contains a disc menu
that describes the contents or
allows you to customize the
playback. For example, the menu
may offer choices for subtitle
languages, special features, or
chapter selection.
Sometimes these are displayed
automatically when you start
playback, otherwise only appear
when you press [DISC MENU].
1
Press [DISC MENU].
Disc menu will appear.
If the feature is not available,
may appear on the TV screen.
2
Using [K / L / { / B], select an
item. Press [OK] to confirm.
Continue this step to set up all
the features you want or to start
playing the disc from the menu.
DISC MENU button:
Displays a DVD disc menu which
varies with the disc and may be
the same as the ‘Title list.’
Cursor K / L / { / B buttons:
Moves the cursor around screen.
OK button:
Selects the currently highlighted
menu option.
Number buttons:
Selects a numbered menu option
(some discs only). (Press [OK]
later.)
3
Press [DISC MENU] to exit the
disc menu.
Some DVDs have a title menu,
which lists the titles available on
them. It helps you to start playback
at a specific title.
1
Press [TITLE].
The title menu will appear.
If the feature is not available,
may appear on the TV screen.
2
Using [K / L / { / B], select a
title to play. Press [OK].
Play will begin at the title you
selected.
TITLE button:
Displays the ‘Title menu’ of a DVD
disc which varies with the disc.
Cursor K / L / { / B buttons:
Moves the cursor around screen.
OK button:
Selects the currently highlighted
menu option.
Number buttons:
Selects a numbered menu option
(some discs only). (Press [OK] later.)
3
Press [TITLE] to exit the title menu.
For Video CDs:
When “PBC (Video CD only)” in
the CD Playback Mode menu is
“ON” and the display menu is not
displayed, the Video CD main menu
will appear when inserting a disc or
press [RETURN] during playback.
Playing discs
Note
Menus vary among discs.
Refer to the information
accompanying the disc for
details.
Playing discs using the disc menu
Note
[TITLE] will not always be
active with all DVDs.
Menus vary among discs.
Refer to the information
accompanying the disc for
details.
Playing discs using the title menu
2
3
2
1
2
2
3
2
1
2
Pause
1
During playback, press
[PAUSE F].
Play will pause and sound will be
muted.
2
Press [PLAY B] to resume play.
1
2
F
Basic playback (cont’d)
DVD-VDVD-VDVD-VDVD-V
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD+RDVD+R
DL
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
DVD-RWDVD-RW
Video
DVD-RDVD-R
Video
CD
CD
Video CDVideo CD
MP3
MP3
DVD-VDVD-VDVD-VDVD-V
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD+RDVD+R
DL
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
DVD-RWDVD-RW
Video
DVD-RDVD-R
Video
DVD-VDVD-VDVD-VDVD-V
Note
On DVDs, set “Still Mode” to
“Field” in the Setup menu if
pictures in the pause mode are
blurred. (Refer to Page 68.)
42
EN
You can skip TV commercials by
pressing [CM SKIP], so that you
can enjoy the recorded programs
without interrupting.
1
During playback, press [CM SKIP].
Normal play will start at 30
seconds ahead from the point you
press [CM SKIP].
Every time you press [CM SKIP],
the searching point will be
extended by 30 seconds ahead.
You can press up to 6 times (180
seconds).
e.g. Press [CM SKIP] once.
Playing discs
Resume play
You can resume play from where
you stopped playing the disc last.
1
During playback, press [STOP C].
The resume message will appear.
2
Press [PLAY B].
In a few seconds, play will resume
from the point at which it stopped
last. You can resume play at the
same point even if you turn off the
unit.
To cancel the resume play and
start playing the disc from the
beginning, press [STOP C] the
second time while the play is
stopped.
Fast forward / Fast reverse
1
During playback, press [FWD D] or [REV E].
Every time you press [FWD D] or [REV E], approximate speed will be
changed as follows.
Fast forward or fast reverse playback across titles (for DVD discs) or
tracks (for MP3) is not possible.
For Video CDs, approximate forward/reverse speeds are x2, x8, x16.
For Audio CDs and MP3 files, approximate speed is fixed at x8 with
sound.
To return to the normal play, press [PLAY B].
1
2
2
1
Note
For MP3 files, playback will
resume from the beginning of
the track at which playback
was stopped.
Some Video CDs with
the PBC function resume
playback from the beginning
of the track.
Skipping TV commercials during play
1
Resume ON
Note
Forward/reverse speed will
be indicated with icons as
follows.
Forward (Approx. Speed)
x2:
x20:
x40:
Reverse (Approx. Speed)
x5:
x20:
x40:
Special playback
DVD-VDVD-VDVD-VDVD-V
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD+RDVD+R
DL
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
DVD-RWDVD-RW
Video
DVD-RDVD-R
Video
CD
CD
Video CDVideo CD
MP3
MP3
DVD-VDVD-VDVD-VDVD-V
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD+RDVD+R
DL
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
DVD-RWDVD-RW
Video
DVD-RDVD-R
Video
CD
CD
Video CDVideo CD
MP3
MP3
DVD-VDVD-VDVD-VDVD-V
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD+RDVD+R
DL
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
DVD-RWDVD-RW
Video
DVD-RDVD-R
Video
B
CM Skip 30 sec.
(forwarding 30 seconds)
Playback will restart automatically.
43
EN
EditingBefore you start
Changing the
Setup menu Others
Español
Connections Getting started
Recording Playing discs
Playing discs
Slow forward / Slow reverse play
1
During playback, press [PAUSE F]. Then press [FWD D] or [REV E].
Every time you press [FWD D] or [REV E], approximate speed will be
changed as follows. (The sound will remain muted.)
To return to the normal play, press [PLAY B].
1
3
2
1
x1/8
Pause
x1/16 x1/8x1/16 x1/3x1/4
Note
Forward/reverse speed will
be indicated with icons as
follows.
Forward (Approx. Speed)
x1/16:
x1/8:
x1/3:
Reverse (Approx. Speed)
x1/16:
x1/8:
x1/4:
Only slow forward playback
is available for playing back
Video CDs.
Rapid play
Rapid Play function is available
only during playback.
Available only on discs recorded
in the Dolby Digital format, Rapid
Play plays back in a slightly
faster/slower speed while keeping
the sound quality just as normal
playback.
1
During playback, press
[RAPID PLAY].
Note
Audio (language) setting
cannot be changed while
using this mode.
This feature may not work at
some point in a disc.
Audio is PCM during Rapid
play mode.
2
1
Special playback (cont’d)
DVD-VDVD-VDVD-VDVD-V
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD+RDVD+R
DL
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
DVD-RWDVD-RW
Video
DVD-RDVD-R
Video
Step by step playback
1
During playback, press [PAUSE F].
Play will pause and sound will be
muted.
2
Press [NEXT G] repeatedly.
The play will advance one frame
(or step) at a time when you press
[NEXT G] with the sound muted.
To play step by step backward:
Press [PREV H] repeatedly.
Every time you press the button,
the play will go backward by one
frame.
Press and hold
[PREV H] / [NEXT G] to
reverse/ advance continuously.
3
Press [PLAY B] to continue the
normal playback.
F
DVD-VDVD-VDVD-VDVD-V
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD+RDVD+R
DL
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
DVD-RWDVD-RW
Video
DVD-RDVD-R
Video
Video CDVideo CD
DVD-VDVD-VDVD-VDVD-V
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD+RDVD+R
DL
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
DVD-RWDVD-RW
Video
DVD-RDVD-R
Video
Video CDVideo CD
2
Press [PLAY B] to continue the
normal playback.
B :
Press [RAPID PLAY] once
during playback.
Plays back approximately
at 0.8 times of normal
playback.
B :
Press [RAPID PLAY]
twice during playback.
Plays back approximately
at 1.3 times of normal
playback.
B :
Press [RAPID PLAY]
three times to play back in
normal speed.
No effects.
Note
Only step by step forward
playback is available for
playing back Video CDs.
44
EN
Playing discs
Note
When selecting a smaller
factor than the current one,
the zoom area will not be
displayed.
To exit the zoom menu, press
[DISPLAY] again at step 1.
To cancel the zoom function,
select “x1.0” using [K / L],
then press [OK].
Zoom
1
During playback, press
[DISPLAY].
Display menu will appear.
2
Using [{ / B], select . Press
[OK].
Zoom menu will appear.
There are four options
(x1.0, x1.2, x1.5 and x2.0), these
are displayed excluding the current
zoom rate.
3
Using [K / L], select a desired
zoom factor to zoom. Press
[OK].
The zoom area will be displayed.
4
Using [K / L / { / B], select a
desired zoom position. Press
[OK].
The zoom play will start.
1
2
3
Marker Setup
This feature allows you to assign a
specific point on a disc to be called
back later.
1
During playback, press
[DISPLAY].
Display menu will appear.
2
Using [{ / B], select .
Press [OK].
Marker setup menu will appear.
<DVD-Video>
<Audio CD>
3
Using [K / L], select a desired
marker number. When it reaches
the desired point, press [OK].
The title (track) number and the
time will be displayed.
4
To return to the marker later:
Using [K / L], select the desired
marker number. Press [OK].
Note
To clear a marker, select the
marker number to be cleared,
then press [CLEAR].
All markers will be erased
when you operate these
operations listed below.
Opening the disc tray
Turning off the power
Recording to a recordable
disc
You can mark up to 6 points.
Marker Setup is not available
when you play the Video CD
with PBC function.
2
3
4
---
---
---
---
---
---
1
2
3
4
5
6
DVD-Video1 1 0:00:00
Audio CD1 0:00:00
---
---
---
---
---
---
1
2
3
4
5
6
DVD-Video1 1 0:00:00
1.2
1.5
2.0
DVD-Video1 1 0:00:00
Special playback (cont’d)
DVD-Video1 1 0:00:00
4
1
DVD-VDVD-VDVD-VDVD-V
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD+RDVD+R
DL
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
DVD-RWDVD-RW
Video
DVD-RDVD-R
Video
Video CDVideo CD
DVD-VDVD-VDVD-VDVD-V
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD+RDVD+R
DL
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
DVD-RWDVD-RW
Video
DVD-RDVD-R
Video
CD
CD
Video CDVideo CD
45
EN
EditingBefore you start
Changing the
Setup menu Others
Español
Connections Getting started
Recording Playing discs
Playing discs
Title/Chapter search
Using [PREV H] / [NEXT G]
1
During playback, press [NEXT G] to skip the current title or chap-
ter and move to the next.
The title or chapter will move forward by one at a time.
If there is no chapter in one title, the current title will be skipped.
To go back to the beginning of the current title or chapter, press
[PREV H].
Press it repeatedly to go to the previous title or chapter. The title or
chapter will move backward one title at a time.
1
2
2
1
Using [DISPLAY]
1
During playback, press [DISPLAY].
Display menu will appear.
2
Using [{ / B], select . Press [OK].
The number next to will be highlighted.
Title:
Using [K / L] or the Number buttons, enter a desired title number to
search. Press [OK].
Title search will start.
Chapter:
Press [B] to move to the number next to for chapter.
Using [K / L] or the Number buttons, enter a desired chapter
number to search. Press [OK].
Chapter search will start.
Note
In search mode display, total
numbers of each search contents
(title/chapter/time) are shown as a
denominator.
001/028 00:00:00/02:18:3301 /01
Total number
of titles
Total number
of chapters
Total time
of the disc
DVD-Video1 1 0:00:00
Search
DVD-VDVD-VDVD-VDVD-V
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD+RDVD+R
DL
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
DVD-RWDVD-RW
Video
DVD-RDVD-R
Video
46
EN
Using [DISPLAY]
1
During playback, press [DISPLAY].
Display menu will appear.
<Audio CD> <MP3 files>
2
Using [{ / B], select . Press [OK].
The number next to will be highlighted.
3
Using [K / L] or the Number buttons, enter a desired track number
to search. Press [OK].
Track search will start.
1
During playback, press
[DISPLAY].
Display menu will appear.
<DVD-Video>
<Audio CD>
2
Using [{ / B], select .
Press [OK].
The number next to will be
highlighted.
To move to the number next to ,
press [B].
When time search is not available,
and time counter are not
displayed.
3
Using [K / L] or the Number
buttons, enter a desired time to
search. Press [OK].
Time search will start.
Playing discs
Track search
CD
CD
Video CDVideo CD
MP3
MP3
Using [PREV H] / [NEXT G]
1
During playback, press [NEXT G] to skip the current track and
move to the next.
The track will move forward one at a time.
To go back to the beginning of the current track, press [PREV H].
Press it repeatedly to go to the previous track. The track will move
backward one at a time.
1
Time search
Note
Time search function is available
only in the same track or title.
Time search is not available
when you play the Video CD
with PBC function.
3
2
1
Note
During CD playback you can
enter a track number directly
using the Number buttons
for track search without
displaying the menu.
Track search is not available
when you play the Video CD
with PBC function.
MP31 0:00:00
Audio CD1 0:00:00
Audio CD1 0:00:00
DVD-Video1 1 0:00:00
Search (cont’d)
3
2
1
DVD-VDVD-VDVD-VDVD-V
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD+RDVD+R
DL
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
DVD-RWDVD-RW
Video
DVD-RDVD-R
Video
CD
CD
Video CDVideo CD
47
EN
EditingBefore you start
Changing the
Setup menu Others
Español
Connections Getting started
Recording Playing discs
Playing discs
Note
The A-B Repeat playback can
only be set with in the current
title (for DVDs), or current
track (for Audio CDs).
To cancel the repeat
playback, select “OFF” at the
step 2. The repeat setting will
also be cancelled when you
stop playback.
You cannot select “Group”
during the random playback
of MP3 files.
Repeat playback is not
available when you play the
Video CD with PBC function.
Repeat playback
1
During playback, press
[DISPLAY].
Display menu will appear.
2
Using [{ / B], select . Press
[OK].
Repeat menu will appear.
<DVD-Video>
<Audio CD, Video CD>
<MP3 files>
3
Using [K / L], select a desired
option to repeat. Press [OK].
The selected repeat play will start.
Title:
The current title will be played
repeatedly. (DVD only)
Chapter:
The current chapter will be played
repeatedly. (DVD only)
All:
The current disc will be played
repeatedly. (CD, MP3, Video CD)
A-B:
The A-B point will be played
repeatedly.
When pressing [OK] while A-B
is highlighted, A-B repeat is set.
Press [OK] again to decide the
starting point (A).
Press [OK] after setting point A to
select the ending point (B).
Track:
The current track will be played
repeatedly. (CD, MP3, Video CD)
Group:
The current group will be played
repeatedly. (MP3 only)
1
Note
To cancel random playback,
press [STOP C] twice during
random playback. “Play mode
OFF” appears on the TV
screen.
For Video CDs with PBC
function, the PBC setting will
be switched to off automatically
when you start random playback.
Random playback
With this function, you can play a
disc randomly instead of playing in
the original order.
1
Press [SETUP].
2
Using [K / L], select “CD
Playback Mode”. Press [OK].
CD Playback Mode menu will
appear.
3
Using [K / L], select “Random
Play”. Press [OK].
Random playback will start.
2
3
1
2
Track
All
Group
OFF
MP31 0:00:00
Track
All
A-B
OFF
Audio CD1 0:00:00
Title
Chapter
A - B
OFF
DVD-Video1 1 0:00:00
Repeat/Random/Program playback
DVD-Video1 1 0:00:00
3
CD
CD
Video CDVideo CD
MP3
MP3
DVD-VDVD-VDVD-VDVD-V
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD+RDVD+R
DL
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
DVD-RWDVD-RW
Video
DVD-RDVD-R
Video
CD
CD
Video CDVideo CD
MP3
MP3
48
EN
You can program the disc to play
in your desired order.
1
Press [SETUP].
2
Using [K / L], select “CD
Playback Mode”. Press [OK].
CD Playback Mode menu will
appear.
3
Using [K / L], select “Program
Play”. Press [OK].
Program play list will appear.
4
Using [K / L], select a desired
track. Press [OK] or [B].
A cursor will move to next.
5
Press [PLAY B] to start
program playback.
Program playback will start.
Playing discs
Note
To erase tracks you selected,
press [CLEAR].
You can make program
settings up to 50.
To cancel program playback,
press [STOP C] twice during
program playback. “Play
mode OFF” appears on the
TV screen.
You may also select a desired
track using the Number
buttons at step 4.
For Video CDs with PBC
function, the PBC setting
will be switched to off
automatically when you start
program playback.
Program playback
2
3
4
1
Selecting the format of audio and video
You can select the format of audio and video as you prefer depending on
the contents of the disc you are playing.
Note
Some discs will only allow you
to change the subtitle from
the disc menu. Press
[TITLE]
or [DISC MENU] to
display the disc menu.
If a 4-digit language code
appears in the subtitle
menu at step 2, refer to the
Language code on page 74.
Switching subtitles
Many DVD-Video discs have
subtitles in one or more languages
the case usually tells you which
subtitle languages are available.
You can switch subtitle languages
anytime during playback.
1
During playback, press
[DISPLAY].
Display menu will appear.
2
Using [{ / B], select .
Press [OK].
Subtitle menu will appear.
3
Using [K / L], select a desired
subtitle language. Press [OK].
Subtitle will be displayed in the
selected language.
When selecting “OFF”, subtitle will
disappear.
1
2
3
5
Program Play
0:06:11Total
09 -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
Program Play
0:00:00Total
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
OFF
1.English
2.French
DVD-Video1 1 0:00:00
DVD-Video1 1 0:00:00
Repeat/Random/Program playback (cont’d)
DVD-VDVD-VDVD-VDVD-V
CD
CD
Video CDVideo CD
49
EN
EditingBefore you start
Changing the
Setup menu Others
Español
Connections Getting started
Recording Playing discs
3
Playing discs
Note
Some discs will only allow
you to change the soundtrack
from the disc menu. Press
[TITLE] or [DISC MENU] to
display the disc menu.
This unit CANNOT record
in both stereo and SAP
(Secondary Audio Program)
at the same time.
Switching audio soundtrack
When playing a DVD-Video
disc recorded with two or more
soundtracks (these are often in
different languages), you can
switch them during playback.
When playing Video CDs or Audio
CDs, you can switch between
stereo, just the left channel or just
the right channel.
1
During playback, press
[DISPLAY].
Display menu will appear.
2
Using [{ / B], select .
Press [OK].
Audio menu will appear.
<DVD-Video>
<Audio CD>
3
Using [K / L], select a desired
audio soundtrack or audio chan-
nel. Press [OK].
<DVD-Video>
Audio soundtrack will switch.
<Video CDs/Audio CDs>
Audio channel will switch.
4
Using [K / L], select a desired
audio channel. Press [OK].
Audio channel will switch.
L
R
L/R
Audio CD1 0:00:00
2.Dolby Digital 2ch French
1.Dolby Digital 5.1ch English
DVD-Video 1 1 0:00:00
Switching virtual surround system
You can enjoy stereophonic virtual
space through your exciting 2
channel stereo system.
1
During playback, press [DISPLAY].
Display menu will appear.
2
Using [{ / B], select .
Press [OK].
Virtual Surround menu will appear.
<DVD-Video>
<DVD+RW>
<Audio CD/MP3 files>
3
Using [K / L], to select “OFF”,
“Type1” or “Type2”, then press
[OK].
OFF: no effect
Type1: natural effect
Type2: emphasised effect
DVD-Video1 1 0:00:00
Note
Select Virtual Surround OFF
in a case sound is dissorted.
The setting will be kept OFF
when the unit is turned off.
2
1
Selecting the format of audio and video (cont’d)
OFF
Type 1
Type 2
DVD-Video1 1 0:00:00
OFF
Type 1
Type 2
DVD+RW1 1 0:00:00
OFF
Type 1
Type 2
Audio CD1 1 0:00:00
1
2
3
4
DVD-VDVD-VDVD-VDVD-V
Video CDVideo CD
CD
CD
DVD-VDVD-VDVD-VDVD-V
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD+RDVD+R
DL
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
DVD-RWDVD-RW
Video
DVD-RDVD-R
Video
CD
CD
Video CDVideo CD
MP3
MP3
50
EN
Playing discs
Switching camera angles
Some DVD-Video discs feature
scenes shot from two or more
angles, check the case for details:
it should be marked with Angle
icon if it contains multi-angle
scenes.
1
During playback, press
[DISPLAY].
Display menu will appear.
Angle icon appears when a
switching camera angle is available.
2
Using [{ / B], select .
Press [OK].
Angle will switch each time you
press [OK].
Reducing block noise
1
During playback, press
[DISPLAY].
Display menu will appear.
2
Using [{ / B], select .
Press [OK].
Noise Reduction menu will appear.
3
Using [K / L], select a desired
option. Press [OK].
Your setting will be activated.
This function reduces noise in the
playback picture. When playing
back discs recorded in long time
mode such as EP or SLP mode,
select “Type 1” or “Type 2”.
(“Type 2” is more effective.)
When playing back discs with a
few noises such as DVD-Video
discs, select “OFF”.
DVD-Video1 1 0:00:00
Type 1
Type 2
OFF
DVD-Video1 1 0:00:00
DVD-Video1 1 0:00:00
Note
Angle icon does not appear on
the screen in a case you have
selected Angle as “OFF” in the
Display setting.
Refer to pages 65-66.
Selecting the format of audio and video (cont’d)
2
1
1
2
3
DVD-VDVD-VDVD-VDVD-V
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD+RDVD+R
DL
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
DVD-RWDVD-RW
Video
DVD-RDVD-R
Video
Video CDVideo CD
DVD-VDVD-VDVD-VDVD-V
51
EN
Before you start
Changing the
Setup menu Others
Español
Connections Getting started
Recording
Playing discs Editing
Editing
Guide to a title list
Title list allows you to check the titles recorded on
the disc easily. You can choose a title to play from
this list and easily edit the titles as you prefer.
Press [TITLE].
1. Titles recorded on the disc can be selected to edit
by pressing [OK] with the cursor on the title.
Using [K / L], select “Edit”. Press [OK].
2. The arrow icon, which means the title list includes
a next or a previous page. Press [K / L] by
following direction of the icon. You can also use
[{ / B] to go to the next/previous page.
3.
The portion bar, which indicates the position of the
disc.
4. The menus in here for editing as you prefer. The
available menus depend on the disc type and
the format type. An item which is not available is
grayed.
5. The details of the title, which can be changed to
the title name you will edit.
6. Time status bar of the title.
Time status will be held even after exiting the edit
mode, and you can resume playback from that
point.
7. The selected title thumbnail from the title list.
8. Playback status of the current title.
Editing discs
You can edit discs for the following items. Be sure
that once you edit titles, they will not remain as
original.
Deleting titles (Refer to page 52)
Putting names on titles (Refer to page
53)
Setting chapter marks (Refer to page
54)
Clearing chapter marks (Refer to pages 54-55)
Hiding chapters (Refer to page 56)
Setting pictures for thumbnails (Refer to page 57)
Dividing a title (DVD+RW/DVD-RW only) (Refer to
page 58)
Editing discs (Setup menu)
Putting name on disc (Refer to page 59)
Setting or releasing disc protect (Refer to pages
60-61)
Erasing disc (Refer to page 62)
Making edits compatible (Refer to page 62)
Chapter Mark
Current Chapter
Index Picture
Title Dividing
Edit Title Name
Title Delete
Edit
NOV/22/05 11:00AM CH12 EP
0:00:59
6
1
2
3
NOV/21/06 11:00
AM
CH12 SP
NOV/21/06 0:20:44
Ov e rw r ite
NOV/22/06 11:35
AM
CH13 EP
NOV/22/06 0:10:33
NOV/24/06 10:05
AM
CH10 EP
NOV/24/06 0:20:11
Pl a y
Ed i t
SP (2Hr)
Information on disc editing
Note
The portion bar in the right side of the title list
may not indicate the precise position in the disc.
The portion bar may not indicate the position for
the titles of which recording time is short.
Once a disc is finalized, editing the disc or
recording to the disc will not be available.
Note
When selecting “Edit” on Pop-up menu of the title
list and edit the title, the title list is displayed after
writing the edited contents onto the disc. Press
[STOP C] to exit the title list.
52
EN
Editing
Deleting titles
You can delete titles which you do
not need anymore.
Be advised that the titles once deleted
cannot be brought back to the disc.
When the last title, which is recorded
in the disc, in the title list is deleted,
the disc space to record on will be
increased. For DVD+R and DVD-R
disc, the disc space to record on will
not be changed.
1
Press [TITLE].
Title list will appear.
<DVD+RW/DVD-RW>
2
Using [K / L], select a desired
title. Press [OK].
Pop-up window will appear.
3
Using [K / L], select “Edit”.
Press [OK].
Edit menu will appear.
4
Using [K / L], select “Title
Delete”. Press [OK].
Confirmation window will appear.
5
Using [K / L], select “Yes”.
Press [OK].
After that, “Are you sure?” will
appear, select “Yes” and then
press [OK].
Title will be deleted.
Data will be written onto the disc
momentarily.
Title list will appear.
<DVD+RW/DVD-RW>
<DVD+R/DVD-R>
Edit
Title Delete
Edit Title Name
Chapter Mark
Index Picture
Title Dividing
Current Chapter
NOV/22/05 11:00AM CH12 EP
0:00:59
1
1
2
3
NOV/21/06 11:00
AM
CH12 SP
NOV/21/06 0:20:44
Ov e rw r ite
NOV/22/06 11:35
AM
CH13 EP
NOV/22/06 0:10:33
EMPTY TITLE
1:37:52 SP(2Hr)
SP (2Hr)
Ed i t
Pl a y
Title Delete
No
Yes
0:00:59
1
NOV/22/05 11:00AM CH12 EP
This operation may take a
while to be completed.
Editing discs
1
2
3
EMPTY TITLE
0:20:44 SP(2Hr)
NOV/22/06 11:35
AM
CH13 EP
NOV/22/06 0:10:33
EMPTY TITLE
1:37:52 SP(2Hr)
SP (2Hr)
1
2
3
4
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
1
2
NOV/22/06 11:35
AM
CH13 EP
NOV/22/06 0:10:33
EMPTY TITLE
1:37:52 SP(2Hr)
SP (2Hr)
Writing to Disc 90%
Note
Deleted part of the titles in the
portion bar changes in color.
1
2
3
NOV/21/06 11:00
AM
CH12 SP
NOV/21/06 0:20:44
NOV/22/06 11:35
AM
CH13 EP
NOV/22/06 0:10:33
EMPTY TITLE
1:37:52 SP(2Hr)
SP (2Hr)
5
53
EN
Before you start
Changing the
Setup menu Others
Español
Connections Getting started
Recording
Playing discs Editing
Editing
You can put title names on the
titles and change the names from
this menu.
The names you put on the titles
will be displayed on a title list.
1
Follow steps 1 to 3 on page 52 to
display the Edit menu.
2
Using [K / L], select “Edit Title
Name”. Press [OK].
A window for entering a title name
will appear.
3
To enter a title name, follow
the steps of “Guide to edit title
name” on this page.
character set
area for entering title names
When you finish entering a title
name, press [OK].
Confirmation window will appear.
4
Using [K / L], select “Yes”.
Press [OK].
The name you entered will be
activated for the title.
5
After this operation is completed,
press [RETURN] to exit.
Data will be written onto the disc
momentarily.
Putting names on titles
4
3
5
2
3
This operation may take a
while to be completed.
Edit Title Name
a b c
A B C
1 2 3
@ ! ?
NOV/22/05 11:00AM CH12 EP
0:00:59
6
Edit Title Name
No
Yes
MY FAVORITE
6
0:00:59
Edit Title Name
a b c
A B C
1 2 3
@ ! ?
M
0:00:59
6
Press
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
<space>
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
<space> <space>
! ” # $ % & ’ ( )
*
+ , - . / : ; < = >
? @ [ ] ^ _ { | }
2
3
4
5
6
7
8
9
0
1
ABC abc
Select
@ ! ?
123
*1
Press , character set will be changed to the “ @
!?
mode automatically.
*2
Press
to
, character set will be changed to the
previous input
mode
automatically.
[
Step1
]
:
[
Step2
]
: Follow the list below, press the Number buttons repeatedly until the
desired letter appears.
Select a desired character set using [K
/
L],
then press [OK].
[
Guide to edit title name
]
A B C
a b c
1 2 3
@ ! ?
To delete letters, press [CLEAR] repeatedly. Holding [CLEAR] to delete
all letters.
• Press
[s /
B
]
to move the cursor to the left and right.
You can enter up to 30 letters.
(*1) (*1)
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
e.g. character set : A B C
A B C A
...
press
Note:
Undefined letters in a
title name are shown
by
*
”. If you delete
them, adjoining letters
letters may change to
*
or other.
1
1
4
7
2
2
2
5
8
0
3
6
9
9
Editing discs (cont’d)
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
54
EN
You can put chapter marks in each
title. Once a chapter is marked,
you can use it for the chapter
search feature.
1
Follow steps 1 to 3 on page 52 to
display the Edit menu.
2
Using [K / L], select “Chapter
Mark”. Press [OK].
Option window will appear.
3
Press [PLAY B] and then
[PAUSE F] to decide the point
at which you will create a new
chapter mark.
It is convenient to use
[PREV H],[NEXT G],
[REV E] and [FWD D] for
finding the point at which a new
chapter mark is to be added.
4
Using [K / L], select “Add”.
Press [OK].
Confirmation window will appear.
5
Using [K / L], select “Yes”.
Press [OK].
A new chapter mark will be added.
6
Press [RETURN] to exit.
Data will be written onto the disc
momentarily.
Editing
Setting chapter marks
5
6
4
2
Editing discs (cont’d)
Chapter Mark - Add
No
Yes
NOV/22/05 11:00AM CH12 EP
0:00:59
3
Chapter 2/ 2
F
Delete
Delete All
Add
NOV/22/05 11:00AM CH12 EP
0:00:59
3
Chapter 2/ 2
Chapter Mark
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
3
Instructions continue on the next page.
Note
When the number of chapter
marks in a title is 99 and the
number of chapter marks in
a disc is 254, chapter marks
cannot be added.
Besides the above-mentioned,
it is not likely to be able to
add according to recorded
time and number of chapters.
Remaining time of the disc
may decrease when adding
chapter marks or increase
when clearing chapter marks
depending on the recording
time or edited contents.
This operation may take a
while to be completed.
1
Follow steps 1 to 3 on page 52 to
display the Edit menu.
2
Using [K / L], select “Chapter
Mark”. Press [OK].
Option window will appear.
3
Using [PREV H] / [NEXT G],
select a chapter mark to be
deleted.
4
Using [K / L], select “Delete”.
Press [OK].
Confirmation window will appear.
5
Using [K / L], select “Yes”.
Press [OK].
The selected chapter mark will be
deleted.
Clearing chapter marks
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
Chapter Mark - Delete
No
Yes
NOV/22/05 11:00AM CH12 EP
0:00:59
3
Chapter 2/ 2
F
5
4
2
3
Note
Remaining time of the disc
may decrease when adding
chapter marks or increase
when clearing chapter marks
depending on the recording
time or edited contents.
55
EN
Before you start
Changing the
Setup menu Others
Español
Connections Getting started
Recording
Playing discs Editing
To delete all chapter marks:
1
Follow steps 1 to 3 on page 52 to
display the Edit menu.
2
Using [K / L], select “Chapter
Mark”. Press [OK].
Option window will appear as
illustrated on page 54.
3
Using [K / L], select “Delete
All”. Press [OK].
Confirmation window will appear.
4
Using [K / L], select “Yes”.
Press [OK].
Final confirmation window will
appear.
5
Using [K / L], select “Yes”.
Press [OK].
All chapter marks will be deleted.
6
Press [RETURN] to exit.
Data will be written onto the disc
momentarily.
Editing
Editing discs (cont’d)
Clearing chapter marks (cont’d)
This operation may take a
while to be completed.
Chapter 2/ 2
Chapter Mark - Delete All
No
Yes
Are you sure?
NOV/22/05 11:00AM CH12 EP
3
0:00:59
4
6
3
2
This operation may take a
while to be completed.
Chapter Mark - Delete All
No
Yes
NOV/22/05 11:00AM CH12 EP
0:00:59
3
Chapter 2/ 2
F
6
Press [RETURN] to exit.
Data will be written onto the disc
momentarily.
6
5
Note
Remaining time of the disc
may decrease when adding
chapter marks or increase
when clearing chapter marks
depending on the recording
time or edited contents.
56
EN
Editing
You can hide chapters from the
title list.
Hidden chapters are skipped
during playback.
1
Follow steps 1 to 3 on page 52 to
display the Edit menu.
2
Using [K / L]], select “Current
Chapter”. Press [OK].
Option window will appear.
3
Using [PREV H] / [NEXT G],
[PLAY B] and [PAUSE F],
decide the chapter to be hidden.
4
Using [K / L],, select “Hidden”.
Press [OK].
“Hidden” is displayed in the middle
of the preview screen on Current
chapter window.
“Hidden” is also displayed on the
lower right corner of the preview
screen on Edit menu option
window other than Current chapter
window.
5
After this operation is com-
pleted, press [RETURN] twice
to exit.
Data will be written onto the disc
momentarily.
If you want to return “Visible”,
select the chapter to be shown.
Then using [K / L],, select
“Visible” at the step 2 on this
page.
Data will be written onto the disc
momentarily.
After that title list is displayed.
Hiding chapters
This operation may take a
while to be completed.
Current Chapter
Hidden
Visible
0:00:59
1
NOV/22/05 11:00AM CH12 EP
Chapter 2/ 2 Visible
Editing discs (cont’d)
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
5
4
2
3
Note
When you make all chapters
in the title to “Hidden”,
“Hidden” is displayed in a
thumbnail of the title list.
1
2
3
NOV/22/06 11:35
AM
CH13 EP
NOV/22/06 0:10:33
NOV/21/06 12:20
AM
CH12 SP
NOV/21/06 0:20:44
Hidden
EMPTY TITLE
1:37:52 SP(2Hr)
SP (2Hr)
57
EN
Before you start
Changing the
Setup menu Others
Español
Connections Getting started
Recording
Playing discs Editing
Editing
Note
If the selected picture for
a thumbnail is overwritten
a default picture will be
selected.
Setting pictures for thumbnails
You can set a picture to each title
for a thumbnail. It helps you to
remember the contents of the title
you are playing. The beginning
picture has been selected as the
default.
1
Follow steps 1 to 3 on page 52 to
display the Edit menu.
2
Using [K / L], select “Index
Picture”.Press [OK].
3
Press [PLAY B] and then
[PAUSE F] to decide the picture
to be set as the thumbnail.
It is convenient to use
[PREV H], [NEXT G],
[REV E] and [FWD D] for
finding the thumbnail picture.
Press [OK].
Confirmation window will appear.
4
Using [K / L], select “Yes”.
Press [OK].
A picture for thumbnail will be set.
5
Press [RETURN] to exit.
Data will be written onto the disc
momentarily.
This operation may take a
while to be completed.
No
Yes
1
Index Picture
NOV/22/05 11:00AM CH12 EP
0:00:59
F
Editing discs (cont’d)
5
2
4
3
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
3
4
58
EN
Editing discs (cont’d)
Editing
Dividing a title
You can divide one title into two
new titles.
1
Follow steps 1 to 3 on page 52 to
display the Edit menu.
2
Using [K / L], select “Title
Dividing”.
3
Press [PLAY B] and then
[PAUSE F] to decide the point
at which you will divide the title.
It is convenient to use
[PREV H],[NEXT G],
[REV E] and [FWD D] for
finding the point to be divided.
Press [OK].
Confirmation window will appear.
4
Using [K / L], select “Yes”.
Press [OK].
The title will be divided into two
new titles.
Both title names are identical, and
index pictures are reset to the first
scene at this point.
Data will be written onto the disc
momentarily.
Note
You cannot divide a title of
the disc on which the number
of recording title comes up to
the maximum (49), and the
number of recording chapter
comes up to the maximum
(254).
This operation may take a
while to be completed.
No
Yes
6
Title Dividing
NOV/22/05 11:00AM CH12 EP
0:00:59
F
2
3
3
DVD+
RW
DVD+
RW
DVD-RW
DVD-RW
+VR
4
59
EN
Before you start
Changing the
Setup menu Others
Español
Connections Getting started
Recording
Playing discs Editing
Editing
Note
You cannot select “Disc Edit”
when finalized DVD disc is
inserted (DVD+R/DVD-R).
Putting name on disc
You can put title names on the
titles and change the names from
this menu.
1
Press [SETUP].
2
Using [K / L], select “Disc Edit”.
Press [OK].
Disc Edit menu will appear.
<DVD+RW>
<DVD+R/DVD-R>
<DVD-RW>
3
Using [K / L], select “Edit Disc
Name”. Press [OK].
A window for entering a title name
will appear.
4
To enter a disc name, follow
the steps of “Guide to edit title
name” on page 53.
When you finish entering a title
name, press [OK].
Confirmation window will appear.
5
Using [K / L], select “Yes”.
Press [OK].
The name you entered will be
activated for the title.
Data will be written onto the disc
momentarily.
Editing discs (Setup menu)
1
2
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
Press [STOP C] if you are
playing a disc.
Disc Edit
Disc Protect OFF ON
Erase Disc
Make Edits Compatible
Edit Disc Name
Disc Edit
Disc Protect OFF ON
Finalize
Edit Disc Name
Edit Disc Name
a b c
A B C
1 2 3
@ ! ?
0:00:00
No Disc Name
Dis c DVD +RW
Tota l T itles 3
Dis c Spa ce Us ed 0:3 0:48
Dis c Pro tect OFF
Mak e Edi ts Co mpati ble Need ed
Edit Disc Name
0:00:00
MY FAVORITE DISC
No
Yes
No Disc Name
Dis c DVD +RW
Tota l T itles 3
Dis c Spa ce Us ed 0:3 0:48
Dis c Pro tect OFF
Mak e Edi ts Co mpati ble Need ed
3
4
5
Disc Edit
Disc Protect OFF ON
Edit Disc Name
Erase Disc
Finalize
This operation may take a
while to be completed.
60
EN
Editing
To prevent accidental editing, or
erasing the titles, you can protect
them.
1
Follow steps 1 to 2 on page 59 to
display the Disc Edit menu.
<DVD+RW>
<DVD+R/DVD-R>
<DVD-RW>
2
Using [K / L]], select “Disc
Protect OFF ON”. Press
[OK].
Confirmation window will appear.
3
Using [K / L], select “Yes”.
Press [OK].
Data will be written onto the disc
momentarily.
Setting or releasing disc protect
This operation may take a
while to be completed.
Disc Protect OFF ON
No
Yes
Editing discs (Setup menu) (cont’d)
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
Disc Edit
Disc Protect OFF ON
Erase Disc
Make Edits Compatible
Edit Disc Name
Disc Edit
Disc Protect OFF ON
Edit Disc Name
Finalize
3
2
Disc Edit
Disc Protect OFF ON
Edit Disc Name
Erase Disc
Finalize
Instructions continue on the next page.
61
EN
Before you start
Changing the
Setup menu Others
Español
Connections Getting started
Recording
Playing discs Editing
Editing
Releasing disc from protect
1
Follow steps 1 to 2 on page 59 to
display the Disc Edit menu.
<DVD+RW>
<DVD+R/DVD-R>
<DVD-RW>
2
Using [K / L]], select “Disc
Protect”. Press [OK].
Confirmation window will appear.
3
Using [K / L], select “Yes”.
Press [OK].
Data will be written onto the disc
momentarily.
Setting or releasing disc protect (cont’d)
Editing discs (Setup menu) (cont’d)
Disc Edit
Disc Protect ON OFF
Erase Disc
Make Edits Compatible
Edit Disc Name
Disc Edit
Disc Protect ON OFF
Edit Disc Name
Finalize
This operation may take a
while to be completed.
Disc Protect ON OFF
No
Yes
3
2
Disc Edit
Disc Protect ON OFF
Edit Disc Name
Erase Disc
Finalize
62
EN
Editing
Note
When you press “Yes”, all
contents of the disc will be
erased.
When you erase the disc, the
contents of the disc will be
erased. (Its format is changed
to DVD+VR mode.)
If you want to cancel erasing
the disc at step 2, select “No”.
Erasing disc
You can erase all titles on a disc.
If you want to record on DVD-RW
formatted with other than DVD+VR
mode, erase all contents on the
disc and format it.
1
Follow steps 1 to 2 on page 59 to
display the Disc Edit menu.
2
Using [K / L]], select “Erase
Disc”. Press [OK].
Confirmation window will appear.
3
Using [K / L], select “Yes”.
Press [OK].
Data will be written onto the disc
momentarily.
This operation may take a
while to be completed.
Disc Edit
Disc Protect OFF ON
Erase Disc
Make Edits Compatible
Edit Disc Name
Editing discs (Setup menu) (cont’d)
2
DVD+
RW
DVD+
RW
DVD-RW
DVD-RW
+VR
DVD-RWDVD-RW
Video
Press [STOP C] if you are
playing a disc.
Erase Disc
Yes
No
When you press “Yes”, all the
contents in the disc will be erased.
Are you sure to erase the disc?
Making edits compatible
You will need to perform “Make
Edit Compatible” to play in other
DVD players.
1
Follow steps 1 to 2 on page 59 to
display the Disc Edit menu.
2
Using [K / L]], select “Make
Edits Compatible”. Press [OK].
Confirmation window will appear.
3
Using [K / L], select “Yes”.
Press [OK].
Data will be written onto the disc
momentarily.
This operation may take a
while to be completed.
DVD+
RW
DVD+
RW
Press [STOP C] if you are
playing a disc.
Make Edit Compatible
Yes
No
3
2
Note
If “Make Edits Compatible”
is not selectable in “Disc
Edit” menu, you do not need
to perform “Make Edits
Compatible” to play in other
DVD players.
3
Disc Edit
Disc Protect OFF ON
Erase Disc
Make Edits Compatible
Edit Disc Name
63
EN
Before you start
Others
Español
Connections Getting started
Recording
Playing discs
Editing
Changing the
Setup menu
Changing the Setup menu
Note
If you change the setting in the Setup menu, the information of contents
stays on even when the power is switched off.
An item which is not currently available is grayed in the Setup menus.
The following table is the contents which you can set and the default settings.
Refer to the following table for useful operation.
Tour of the Setup menu
Setup
Items (highlight is the default) Contents
1.Language setting
Pages 64-65
Disc Menu Language
English
French
Spanish
Set the language for disc menu.
Audio Language
Original
English
French
Set the language for audio.
Subtitle Language
OFF
English
French
Set the language for subtitle.
2.Display setting
Pages 65-66
OSD Language
English
Français
Español
Set the language for OSD
(On Screen Display).
Angle Icon
ON
OFF
Set the display or undisplay of
multi-angle icon in a case the
DVD in playback mode contains
multi-angle scene.
Screen Saver OFF
5 minutes
10 minutes
Set the time to work the screen
saver on the screen.
3.Audio setting
Pages 66-67
Digital Out PCM
48kHz
96kHz
Set whether the sound recorded
in 96kHz will be down sampled
in 48kHz.
Dolby Digital
PCM
Stream
Set the type of sound signal
which outputs from the digital
audio output jack.
Dynamic Range
Control
ON
OFF
Compressing the range of sound
volume.
4.Video setting
Page 68
Progressive Scan ON
OFF
Set to the progressive scan mode
(set to “ON”) or to the interlace
scan mode (set to “OFF”).
Still Mode
Auto
Field
Frame
Set the type of still image in
pausing playback.
5.Parental setting
Pages 69-70
Parental Lock
(Change password)
All
level 8 to 1
Set the parental level of your
DVD discs.
Enter the current
four-digit password
Set and change the password.
6.PBC setting
Page 70
PBC (Video CD only)
ON
OFF
Set the Playback Control.
(Video CD only)
64
EN
Changing the Setup menu
Language
Audio Original
Disc Menu English
Subtitle OFF
Language
Audio Original
Disc Menu English
Subtitle OFF
Language - Disc Menu
French
Spanish
Other
English
Language - Audio
English
French
Spanish
Other
Original
Disc Menu Language (Default : English)
Set the language for Disc Menu.
Using [K / L], select a
setting. Press [OK].
Your setting will be activated.
Using [K / L], select a
setting. Press [OK].
Your setting will be activated.
When Original is selected, the
audio language will be in the
disc’s default language.
Audio Language (Default : Original)
Set the Audio language.
1
Press [SETUP].
2
Using [K / L], select “Playback”. Press [OK].
Playback menu will appear.
3
Using [K / L], select “Language”. Press [OK].
Language menu will appear.
4
Using [K / L], desired item. Press [OK].
Press [STOP C] if you are playing a disc.
Language setting
1
2
4
3
Language
Audio Original
Disc Menu English
Subtitle OFF
Language - Subtitle
OFF
French
Spanish
Other
English
Using [K / L], select a
setting. Press [OK].
Your setting will be activated.
Subtitle Language (Default : OFF)
Set the Subtitle language.
65
EN
Before you start
Others
Español
Connections Getting started
Recording
Playing discs
Editing
Changing the
Setup menu
Changing the Setup menu
If “Other” is selected, press 4-digit code using the Number buttons.
Language - Subtitle
Code Input
-- - -
When you finish entering
the code, press [OK].
Refer to the language
code table on page 74.
5
Press [SETUP] to exit.
Note
Only the languages supported
by the disc can be selected.
Audio Language setting may
not be available to some
discs.
You can change or switch off
the subtitles on a DVD disc
also from the disc menu if it is
available.
Press
[CLEAR] or [s] to erase
numbers entered incorrectly.
Display setting
1
Press [SETUP].
2
Using [K / L], select “Display”. Press [OK].
Display menu will appear.
3
Using [K / L], select a desired item. Press [OK].
Press [STOP C] if you are playing a disc.
5
Language setting (cont’d)
1
2
3
Display
Angle Icon ON
Screen Saver 10 minutes
OSD Language English
OSD Language
Français
Español
English
Using [K / L], select a
setting. Press [OK].
Your setting will be activated.
OSD Language (Default : English)
Set the language for the On Screen display.
Display
Angle Icon ON
Screen Saver 10 minutes
OSD Language English
Angle Icon
OFF
ON
Using [K / L], select a
setting. Press [OK].
Your setting will be activated.
Angle Icon (Default : ON)
Set to “ON” to show the Angle Icon during the playback.
Instructions continue on the next page.
66
EN
Changing the Setup menu
Display
Angle Icon ON
Screen Saver 10 minutes
OSD Language English
Screen Saver
5 minutes
10 minutes
OFF
15 minutes
30 minutes
Using [K / L], select a
setting. Press [OK].
Your setting will be activated.
Screen Saver (Default : 10 minutes)
Set the time to work the screen saver function on the screen.
4
Press [SETUP] to exit.
1
Press [SETUP].
2
Using [K / L], select “Playback”. Press [OK].
Playback menu will appear.
3
Using [K / L], select “Disc Audio”. Press [OK].
Press [STOP C] if you are playing a disc.
Choose the appropriate Audio settings for your external
equipment.
It will only affect a disc playback.
Audio setting
Display setting (cont’d)
4
1
Digital Out
Set the digital audio output.
Using [K / L], select a
setting. Press [OK].
Option window will appear.
Proceed to step A or B.
Note
Dynamic Range Control
function is available only
on the discs which are
recorded in the Dolby
Digital format.
Disc Audio
Dynamic Range Control ON
Digital Out
Digital Out
Dolby Digital Stream
PCM 48kHz
2
3
67
EN
Before you start
Others
Español
Connections Getting started
Recording
Playing discs
Editing
Changing the
Setup menu
Changing the Setup menu
Settings for Dolby Digital (Default : Stream)
Digital Out - Dolby Digital
Stream
PCM
Using [K / L], select a setting. Press [OK].
Your setting will be activated.
PCM :Convert the Dolby Digital into PCM (2 channel).
When your amplifier/decoder is NOT compatible with Dolby Digital, set
to “PCM”.
Stream :Outputs Dolby Digital signals
When your amplifier/decoder is compatible with Dolby Digital, set to
“Stream”.
Settings for PCM (Default : 48kHz)
Digital Out - PCM
96kHz
48kHz
Using [K / L], select a setting. Press [OK].
Your setting will be activated.
48kHz :If your amplifier/decoder is NOT
compatible with 96kHz PCM, select
“48kHz”. 96kHz sound will be output in
48kHz.
96kHz :If your amplifier/decoder is compatible
with 96kHz PCM, select “96kHz”. 96kHz
sound will be output.
B
A
Note
When playing disc with
copyright protection
Even if you select
“96kHz”, the sound will
be down sampled at
48kHz.
Audio setting (cont’d)
Using [K / L], select a setting.
Press [OK].
Your setting will be activated.
Dynamic Range Control (Default : ON)
Set to “ON” to compress the range between soft and loud sounds.
4
Press [SETUP] to exit.
Disc Audio
Digital Out
Dynamic Range Conrtol ON
Dynamic Range Control
OFF
ON
4
68
EN
Changing the Setup menu
4
3
2
Video setting
1
Proceed to steps 1 to 3 above.
2
Using [K / L], select “Still Mode”. Press [OK].
3
Using [K / L], select a setting. Press [OK].
Your setting will be activated.
Press [STOP C] if you are playing a disc.
Still Mode (Default : Auto)
Select “Auto” usually.
Note
Frame is 1 completed video image made
up of 2 fields (There are 30 frame per
second of NTSC video).
Progressive Scan (Default : OFF)
This unit is compatible with the Progressive Scan System. The feature provides you with the higher definition images
than the traditional output system does. To utilize this feature, you must set Progressive Scan mode to “ON”.
1
Press [SETUP].
2
Using [K / L], select “Playback”. Press [OK].
Your setting will be activated.
3
Using [K / L], select “Video”. Press [OK].
4
Using [K / L], select “Progressive Scan”. Press [OK].
5
Using [K / L], select “ON”.
Press [OK].
Confirmation window will
appear.
6
Using [{ / B], select “Yes”. Press [OK].
7
Using [K / L], select “Yes” within 15 seconds. Press [OK].
8
Press [SETUP] to exit.
4
Press [SETUP] to exit.
Note
If your TV is compatible with Progressive
Scan (525p / 480p), you must use the
Component video cable (commercially
available) to connect this unit to the TV. (See
Method 2 on page 13.) If not, use the video
cable and set the Progressive Scan to “OFF”
or press and hold [SETUP] for more than 3
seconds during DVD playback.
When selecting
No
or not pressing any
keys on the unit or remote control within
15 seconds
at step 5, Progressive Scan
remains to be “OFF” (interlace scan).
1
4
3
2
Video - Progressive Scan
Activating progressive scan:
Check your TV has progressive scan
and connect with component video cable.
NOTE: If there is no picture or picture is
distorted after selecting “Yes”,
Wait about 15 seconds for auto recovery.
Activate?
Yes
No
Auto: Optimum resolution setting (Field or Frame) is selected.
Field: Images in the still mode will be stabilized.
Frame: Images in the still mode will be highly defined.
5
8
6
7
69
EN
Before you start
Others
Español
Connections Getting started
Recording
Playing discs
Editing
Changing the
Setup menu
Note
Parental lock function may not be
available to some discs.
With some DVDs, it may be difficult to
find if they are compatible with parental
lock. Be sure to check if the parental
lock function operates in the way that
you have set.
Record the password in case you forget it.
Settings for Parental lock level
1
Press [SETUP].
2
Using [K / L], select “Playback”. Press [OK].
Playback menu will appear.
3
Using [K / L], select “Parental Lock”. Press [OK].
4
Using [K / L], select the desired level. Press [OK].
Press [STOP C] if you are playing a disc.
Some DVD-Video discs feature a Parental Lock level. Playback will stop if the ratings exceed the levels you
set, it will require you to enter a password before the disc will playback. This feature prevents your children
from viewing inappropriate material.
Changing the Setup menu
Parental Lock (Default : All)
Set the Parental Lock level.
Using [K / L], change the
parental level. Press [OK].
Option window will appear
Proceed to step A or B.
Using the Number buttons,
enter a new password. Press
[OK].
Your setting will be activated.
Using [K / L], select “Yes”.
Press [OK].
If you select “No”, proceed
to step 5.
Yes
A
A password has not been set yet.
Playback
Video
Audio
Parental Lock All
Language
Parental Lock
8
7
6
5
4
3
2
1
All
Parental Lock
Yes
No
Change password?
Parental Lock
Password Input
- - - -
Instructions continue on the next page.
1
4
3
2
70
EN
Changing the Setup menu
Note
Press [CLEAR] to erase numbers entered incorrectly.
When you forget the password or you want to clear
all settings in Parental lock, enter 4,7,3,7 using
the Number buttons in Password Input window.
Password will be cleared and parental levels will be
set to “All”.
Parental Lock
Password Input
- - - -
Using the Number buttons,
enter a new password. Press
[OK].
Your setting will be activated.
5
Press [SETUP] to exit.
A password has been set already.
Parental Lock
Yes
No
Change password?
Parental Lock
Password Input
* * * *
Yes
Using[K / L], select “Yes”.
Press [OK].
If you select “No”, proceed
to step 5.
Using the Number buttons,
enter the current password.
B
5
Settings for Parental lock level (cont’d)
<Change the password>
Settings for PBC (Playback Control)
1
Press [SETUP].
2
Using [K / L], select “CD Playback Mode”. Press [OK].
CD Playback menu will appear.
3
Using [K / L], select “PBC (Video CD only)”. Press [OK].
4
Using [K / L], select “ON” or “OFF”. Press [OK].
Your setting will be activated.
Press [STOP
C
] if you are playing a disc.
PBC (Video CD only) (Default : ON)
You can select images or information on the menu screen by
activating PBC (Playback Control) function of Video CD.
CD Playback Mode
Program Play
Random Play
PBC (Video CD only) ON
PBC (Video CD only)
OFF
ON
Note
When playing Video CDs with PBC
function, some operations (e.g.
select and track repeat) cannot be
performed. Select PBC function “OFF”
to perform those operations.
PBC setting turns to “ON” when
loading Video CDs with PBC function,
thus, even after setting PBC to “OFF”
and ejecting the Video CD then
reloading the Video CD, this setting
turns to “ON” automatically.
71
EN
Before you start Español
Connections Getting started
Recording
Playing discs
Editing
Others
Changing the
Setup menu
Others
Before requesting service for this unit, check the table below for a possible cause of the problem you are
experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore
proper operation.
Symptom Remedy
Power
The power does not turn on.
• Check that the AC power cord is connected securely.
• (In case of power failure) Check the breaker.
Picture
There is no picture.
• Re-connect the connecting cords securely.
• Check if the connecting cords are damaged.
• If Setup menu appears on the TV screen, press
[RETURN] to exit.
• Check the connection to your TV (page 13).
• Check if the Progressive Scan mode is set correctly
according to your TV (page 68).
• Switch the input selector on your TV (such as to “EXT1”)
so that the signal from the unit appears on the TV screen.
Picture noise appears.
• The disc is dirty or flawed.
• If the picture output signal from the unit passes through
your VCR to get to your TV, or if you are connected to a
combination TV/VIDEO player, the copy-protection signal
applied to some DVD programs could affect picture quality.
If you still experience this problem even when you connect
the unit directly to your TV, try connecting the unit to your
TV's S-VIDEO input.
TV program pictures are distorted. • Adjust TV antenna.
• Adjust the picture (see the TV’s instruction manual).
• Place the unit and TV farther apart.
Place the TV and any bunched antenna cables farther
apart.
TV program reception does not fill the
screen.
Try to set the channels with “Auto Channel Preset” or “Manual
Channel Preset” in the Setup menu (pages 18-19
).
Select a channel of any TV program using [CHANNEL
-
/+].
The playback picture or TV program
from the equipment connected
through the unit is distorted.
• If the playback picture output from a DVD player, VCR or
tuner goes through the unit before reaching your TV, the
copy-protection signal applied to some programs could
affect picture quality. Disconnect the playback equipment
in question and connect it directly to your TV.
Sound
There is no sound.
• The disc is dirty or flawed.
• Re-connect all connections securely.
• Check if the connecting cord is damaged.
• Check the connections to the amplifier input.
• The input source setting on the amplifier is incorrect.
The recorder is in pause mode or in Slow-motion Play mode.
• The recorder is in fast forward or fast reverse mode.
If the audio signal does not come through the DIGITAL OUT
(COAXIAL) jack, check the Audio settings (pages 66-67).
TV channels cannot be changed. • Switch the input to TV.
• Connect the antenna cable correctly (page 13).
Playback picture is distorted. • Keep the equipment which may cause electrical
disturbances, such as a cellular phone, away.
Sound is noisy. • The disc is dirty or flawed.
Remote control
The remote control does not function.
• Batteries are weak.
• There are obstacles between the remote control and the
unit.
• The remote control is far from the unit.
• There are no batteries in the remote control.
• Turn on the unit.
The remote control is not pointed at the remote sensor on the unit.
• If above remedies do not solve the problem, please call the Authorized Service Center for help.
Troubleshooting
72
EN
Others
Symptom Remedy
Recording/Timer Recording/Editing
The channel cannot be changed from
the channel you are recording.
• Set the TV’s input to “TV.
The unit starts playing from the disc
automatically.
• The DVD-Video features an auto playback function.
Recording does not start immediately
after you press [RECORD I] or [REC I].
A brand-new DVD+RW or DVD-RW has been inserted. It takes a
while for the unit to automatically format a DVD+RW/-RW.
Some functions such as Stop, Search, or
Slow-motion Play cannot be performed.
Depending on the disc, you may not be able to do some of the
operations above. See the instruction manual supplied with
the disc.
The language for the sound track
cannot be changed.
• Multilingual tracks are not recorded being played.
• The DVD-Video prohibits the changing of the language for
the sound track.
• Try changing the language using the DVD-Video’s menu.
The angles cannot be changed.
Multi-angles are not recorded on the DVD-Video being played.
• The angle-change operation is whenever possible as long
as the disc contains a multi-angle portion. Actual change
will be performed when the portion has come up.
• The DVD-Video prohibits changing angles.
• Try changing the angle using the DVD-Video's menu.
Nothing was recorded even though
you set the timer setting correctly.
• There was a power failure during recording.
• The unit’s internal clock stopped due to a power failure
that lasted for more than 30 seconds.
Reset the clock (pages 21- 23).
• Disconnect the AC power cord from the AC outlet, and
connect it again.
• The program contains copy protection signals that restricts
copying.
• The timer setting overlapped with another setting that has
priority.
The subtitle language cannot be
changed or turned off.
• Multilingual subtitle are not recorded on the DVD-Video.
• The DVD-Video prohibits changing of the subtitles.
• Try changing the subtitle using the DVD-Video’s menu.
The disc does not start playback from
the beginning.
Resume play was activated (page 42). Press [STOP
C
] twice.
You have inserted a disc whose Title menu or DVD menu
automatically appears on the TV screen when it is first
insert.
Playback
The disc does not play.
• No disc is inserted.
• A blank disc is inserted.
• The disc is upside down. Insert the disc with the labeled
side facing up.
• The disc is not correctly inserted.
The unit cannot play certain discs (such as a CD-ROM)
(page 38).
• The region code on the DVD-Video does not match the
unit (page 38).
• Moisture has condensed inside the unit. Remove the disc
and leave the unit turned on for about two hours until the
moisture evaporates (page 4).
• If the disc was recorded on another recorder, the unit
cannot play the disc if it was not finalized.
Playback image freezes for a second. • During the playback of two layered disc, picture may
freeze for a moment when the 1st layer switches to the
2nd layer. This is not a malfunction.
Recording does not stop immediately
after you press [STOP C].
• It will take a few seconds for the unit to input disc data
before recording can stop.
Timer Recording is not complete or
did not start from the beginning.
• The timer setting overlapped with another setting that has
priority (page 31).
• Disc space was not enough.
Troubleshooting (cont’d)
73
EN
Before you start Español
Connections Getting started
Recording
Playing discs
Editing
Others
Changing the
Setup menu
Others
Symptom Remedy
Others
The unit does not operate properly. • When static electricity, etc., causes the unit to operate
abnormally, unplug the unit and then plug it in again.
The disc tray does not open when you
press [OPEN/CLOSE A].
• It may take a few seconds for the disc tray to open after
you have recorded or edited a disc.
• This is because the unit is adding disc data to the disc.
“Repairing” appears on the TV screen.
In a case you intend to cancel the
Repairing process.
• If there is a power failure or unplugging during recording,
finalizing, formatting or editing (even after “Repairing”
disappears), a Repairing process will begin automatically
just after turning the unit on again.
It may take several minutes up to about four hours.
• If you intend to cancel the Repairing process, press
[OPEN/CLOSE A] on the front panel, then select “Yes”
and press [OK]. After that, press [OPEN/CLOSE A] to
take out the disc. The disc canceled the Repairing
process MAY NOT work.
Disc Error
Recording Error
Region Error
Parental Lock On
Recording Error
--- Please eject the disc. ---
Playback feature may not be
available on this Disc.
--- Please eject the disc. ---
Playback is not authorized in your
region.
The current selected parental level
prohibits playback.
This program is not allowed
to be recorded.
Recording Error
This program is not
recordable in +VR mode.
Unplayable disc is inserted
in the unit.
The disc is upside down.
Insert the standardized disc
which bear the marks on page 38.
Insert the disc with the labeled
side facing up.
Recording Error
Can not record on this disc.
CauseError message Solution
Playback is not authorized
in the region of the DVD-Video
disc which you inserted in the
unit.
The current selected parental
level in the SETUP Menu
prohibits playback.
The recording function
encountered the copy prohibited
program.
You are trying to record the copy-
once program.
You are trying to record onto the
disc which is unrecordable, or the
disc status is unable to record.
The disc is dirty.
The disc is damaged.
Insert the DVD-Video disc with
region codes 1 or ALL.
Check the “Parental Lock” setting
(pages 69-70).
You cannot record copy
prohibited programs.
You cannot record the copy-
once program.
Insert the recordable disc, and
ensure the disc status satisfies
the recording requirements
(page 24).
Clean the disc with a cleaning cloth.
Replace the disc.
Recording Error
Disc is full.
You are trying to record onto
the disc which has no space
for recording.
Insert the recordable disc with
enough recording space.
(No area for new recording)
You cannot record more
than 49 titles on one disc.
You are trying to record onto the
disc on which the number of
recording titles comes up to the
maximum (49).
Delete unnecessary titles
(page 52).
(The maximum is 49)
Recording Error
This disc is protected and not
recordable.
You are trying to record on to the
protected disc which is set in the
Disc Edit menu.
Release the disc protect setting
in the Disc Edit menu (page 35).
Repairing
Troubleshooting (cont’d)
Repairing
Do you want to cancel a repairing process ?
When selecting “Yes”, the disc may not be
usable.
Yes No
74
EN
Others
Language Code Languag e Code Language CodeLanguage Code
Abkhazian 4748
Afar 4747
Afrikaans 4752
Albanian 6563
Amharic 4759
Arabic 4764
Armenian 5471
Assamese 4765
Aymara 4771
Azerbaijani 4772
Bashkir 4847
Basque 5167
Bengali;Bangla 4860
Bhutani 5072
Bihari 4854
Bislama 4855
Breton 4864
Bulgarian 4853
Burmese 5971
Byelorussian 4851
Cambodian 5759
Catalan 4947
Chinese 7254
Corsican 4961
Croatian 5464
Czech 4965
Danish 5047
Dutch 6058
English 5160
Esperanto 5161
Estonian 5166
Faroese 5261
Fiji 5256
Finnish 5255
French 5264
Frisian 5271
Galician 5358
Georgian 5747
German 5051
Greek 5158
Greenlandic 5758
Guarani 5360
Gujarati 5367
Hausa 5447
Hebrew 5569
Hindi 5455
Hungarian 5467
Icelandic 5565
Indonesian 5560
Interlingua 5547
Interlingue 5551
Inupiak 5557
Irish 5347
Italian 5566
Japanese 5647
Javanese 5669
Kannada 5760
Kashmiri 5765
Kazakh 5757
Kinyarwanda 6469
Kirghiz 5771
Kirundi 6460
Korean 5761
Kurdish 5767
Laothian 5861
Latin 5847
Latvian; Lettish 5868
Lingala 5860
Sindhi 6550
Singhalese 6555
Siswat 6565
Slovak 6557
Slovenian 6558
Somali 6561
Spanish 5165
Sundanese 6567
Swahili 6569
Swedish 6568
Tagalog 6658
Tajik 6653
Tamil 6647
Tatar 6666
Telugu 6651
Thai 6654
Tibetan 4861
Tigrinya 6655
Tonga 6661
Tsonga 6665
Turkish 6664
Turkmen 6657
Twi 6669
Ukrainian 6757
Urdu 6764
Uzbek 6772
Vietnamese 6855
Volapuk 6861
Welsh 4971
Wolof 6961
Xhosa 7054
Yiddish 5655
Yoruba 7161
Zulu 7267
Lithuanian 5866
Macedonian 5957
Malagasy 5953
Malay 5965
Malayalam 5958
Maltese 5966
Maori 5955
Marathi 5964
Moldavian 5961
Mongolian 5960
Nauru 6047
Nepali 6051
Norwegian 6061
Occitan 6149
Oriya 6164
Oromo (Afan) 6159
Panjabi 6247
Pashto; Pushto 6265
Persian 5247
Polish 6258
Portuguese 6266
Quechua 6367
Rhaeto-Romance 6459
Romanian 6461
Russian 6467
Samoan 6559
Sangho 6553
Sanskrit 6547
Scots Gaelic 5350
Serbian 6564
Serbo-Croatian 6554
Sesotho 6566
Setswana 6660
Shona 6560
Recording Error
Recording Error
You cannot record more than
254 chapters on one disc.
Recording Error
You cannot record on this disc
as Control Information is full.
Recording Error
You cannot record on this
disc as Power Calibration
Area is full.
Recording Error
This disc is already finalized.
CauseError message Solution
You are trying to record onto the
VR mode DVD-RW disc on which
the number of recording chapters
comes up to the maximum (254).
This disc has no space to write
the Control Information when
recording or deleting contents.
When editing has been repeatedly
performed, the control Information
area may come up to be full even
the recording area has enough space.
When recordings are performed
repeatedly onto an unstable disc,
this area may come up to be full.
Every time you insert a disc for
recording, the disc's working area
will be taken up. And if you repeat
this frequently, it will be used up
sooner and you may not be able to
record full 99 titles.
You are trying to record onto
the disc already finalized.
Delete unnecessary chapter
marks (page 54-55).
Delete unnecessary titles
(page 52).
Insert a new disc.
Release the finalizing for this
disc (page 36).
The disc has a different menu
layout. (Set “Replace Disc Menu”
to ON to rewrite the menu.)
You are trying to record onto
the +VR formatting disc that had
been recorded by the other
recorder.
Set “Replace Disc Menu”
to “ON” to rewrite the menu,
after that you will record to disc
(page 26).
(The maximum is 254)
Language code
* If you are still having trouble with the unit after checking “Troubleshooting”, write down the error code and the
error description for calling our help line mentioned on the front page to locate an Authorized Service Center.
Troubleshooting (cont’d)
75
EN
Before you start Español
Connections Getting started
Recording
Playing discs
Editing
Others
Changing the
Setup menu
Others
Frequently Asked Questions
Analog audio
An electrical signal that directly
represents sound. Compare this
to digital audio which can be an
electrical signal, but is an indirect
representation of sound. See also
Digital audio.
Aspect ratio
The width of a TV screen relative
to its height. Conventional TVs
are 4:3 (in other words, the screen
is almost square); widescreen
models are 16:9 (the screen is
almost twice as wide as it is high).
Chapter
Just as a book is split up into
several chapters, a title on a
DVD disc is usually divided into
chapters. See also Title.
Component video output
Each signal of luminance (Y)
and component (PB/CB, PR/CR) is
independent to output so that you
can experience picture color as it is.
Also, due to compatibility with
progressive video (525p/480p),
you can experience higher-density
picture than that in interlace
(525i/480i).
Digital audio
An indirect representation of sound
by numbers. During recording,
the sound is measured at discrete
intervals (44,100 times a second
for CD audio) by an analog-to-
digital converter, generating a
stream of numbers. On playback,
a digital-to-analog converter
generates an analog signal based
on these numbers. See also
Sampling frequency and Analog
audio.
Dolby Digital
The system to compress digital
sound developed by Dolby
Laboratories. It offers you sound of
stereo(2ch) or Multi-channel audio.
Finalize
To make DVD discs, which have
been recorded on, possible to play
in DVD players. With this unit, it is
possible to finalize DVD-R/DVD+R/
DVD-RW discs.
MP3 (MPEG Audio Layer 3)
MP3 is a method of compressing
files. You can copy MP3 files on
CD-R/RW discs from the computer
and play the files on this unit.
PBC (Playback Control)
(Video CD only)
This function enables you to play
back interactive software using a
menu screen. See also Video CD.
PCM (Pulse Code Modulation)
The most common system of
encoding digital audio, found on
CDs and DAT. Excellent quality,
but requires a lot of data compared
to formats such as Dolby Digital
and MPEG audio. For compatibility
with digital audio recorders (CD,
MD and DAT) and AV amplifiers
with digital inputs, this unit can
convert Dolby Digital and MPEG
audio to PCM. See also Digital
audio.
Progressive Scan (525p/480p)
A type of display that does not
split each frame into fields, and
instead scans directly through
all the scanlines of each frame
in order. Progressive Scan
provides less flickering and higher
image resolution than traditional
(525i/480i) TV signals. Refer
to page 68 for instructions on
selective Progressive Scan mode.
Regions code
Regions associate discs and
players with particular areas of the
world. This unit will only play discs
that have compatible region codes.
You can find the region code of
your unit by looking on the rear
panel. Some discs are compatible
with more than one region (or all
regions).
Sampling frequency
The rate which sound is measured
by a specified interval to turn into
digital audio data. The numbers of
sampling in one second defines
as sampling frequency. The higher
the rate, the better the sound
quality as possible as it is.
SAP
(Secondary Audio Program)
Sub-audio channel which is
delivered separately from main-
audio channel. This audio channel
is used as an alternate in bilingual
broadcasting.
S-Video output
It delivers independently
each signal of color(C) and
luminance(Y) to TV as video
signals, so that higher-quality
picture will be gained.
Title (DVD only)
A collection of chapters on DVD
disc. See also chapter.
Track
Audio CDs use tracks to divide up
the content of a disc. The DVD
equivalent is called a chapter. See
also Chapter.
Video CD
The contents of a Video CD. When
playing back a Video CD with the
PBC function, the title menu will
appear automatically.
–– Can I record to CD-R/RW?
No, this unit records only DVDs.
–– Can I play DVD-Video that is bought in another country?
Possible when the region code of the disc is 1 and All.
–– Is this unit JPEG compatible?
No.
–– Can I connect the unit to my PC?
No, you cannot control the unit by PCs.
Glossary
76
EN
Others
System
Power requirements
Power consumption
Weight
Dimensions (width x height x depth)
Operating temperature
Operating humidity
TV format
DVD-Video, DVD+R/RW, DVD-R/RW, CD-DA, CD-R/RW
AC120 V, 60 Hz
20 W (standby: 1.6 W)
5.06 lbs ( 2.3 kg )
17 3/16" x 2 5/8" x 9 5/8" (435 x 66 x 244 mm)
41F° to 104F° (5°C to 40°C)
Less than 80% (no condensation)
NTSC
General
Receivable channels
VHF
UHF
CATV
2-13ch
14-69ch
C1-C125ch
Recording
Tuner
Input/Output
Recording format
Recordable discs
Video Recording format
DVD+Rewritable, DVD+Recordable
DVD
-
Rewritable, DVD
-
Recordable (+VR mode only)
Audio recording format
Sampling frequency
Compression format
Video recording format
Sampling frequency
Compression format
13.5MHz
MPEG
48kHz
Dolby Digital
Video input
Input level
Jacks
Video output
Output level
Jack
Component video output
Output level
Jacks
S-Video input
Y (Iuminance) - Input level
C (color) - Input level
Jacks
Audio input
During audio input
Jacks
Audio output
During audio output
Jacks
S-Video output
Y (Iuminance) - Output level
C (color) - Output level
Jack
VHF/UHF antenna input/output terminal
Input 1 (rear), 2 (front)
1 Vp-p (75)
RCA jack
Output 1 (rear)
1 Vp-p (75)
RCA jack
Output 1 (rear)
Y: 1.0 Vp-p (75), P
B
/C
B
, P
R
/C
R
: 0.7 Vp-p (75)
RCA jacks
Input 1 (rear), 2 (front)
1 Vp-p (75)
286 mVp-p (75)
4 pin mini DIN
Input 1 (rear), 2 (front) L/R
2V rms (Input impedance: more than 22k)
RCA jacks
Output 1 L/R (rear)
2V rms (Output impedance: less than 1k)
RCA jacks
Digital audio output
Output level
Jack
Output 1 (rear) COAXIAL
500 mVp-p (75)
RCA jack
Output 1 (rear)
1 Vp-p (75)
286 mVp-p (75)
4 pin mini DIN
VHF/UHF set 75
Note:
The specifications and design of this product are subject to change without notice.
Specifications
77
ES
Before you start
Connections Getting started
Recording
Playing discs
Editing
Changing the
Setup menu
Others Español
Paso 4: Seleccione la
velocidad de
grabación.
Español
Estas instrucciones le ayudarán a entender fácilmente cómo grabar discos DVD.
Nota:
Asegúrese que las pilas están en el mando a distancia y que ha conectado correctamente esta unidad y el TV.
Fácil grabación de DVD
Paso 1: Elija un tipo de disco.
Puede elegir entre distintos tipos de discos DVD grabables.
Este grabador de DVD puede grabar los siguientes tipos de
discos.
Por ejemplo, cuando desea grabar repetidamente en
el mismo disco, seleccione el disco de tipo regrabable
DVD+RW/DVD-RW.
Cuando desea guardar grabaciones sin alterarlos, un DVD no
regrabable DVD+R/DVD-R puede ser más conveniente.
Paso 3: Coloque un disco en blanco.
Para abrir
Para cerrar
2
Cargando
Esta operación puede demorar en reconocerse.
3
1
Paso 2: Encienda
la unidad.
Mando a distanci
Formateando 90%
DVD+RW/DVD-RW solamente
Seleccione la entrada a la que
se conectará la unidad en su
TV.
HQ (1Hr) 0:58
78
ES
Español
Fácil grabación de DVD (cont.)
Sugerencia 1: Reproduzca el contenido grabado
Puede seleccionar el título que desea reproducir de un menú indicado y
empiece a reproducir inmediatamente. El contenido grabado se puede
acceder fácilmente con un simple procedimiento de elegir un título en la
pantalla del menú.
¿Qué son títulos y capítulos?
El contenido de un disco DVD se divide generalmente en títulos. Los títu-
los pueden dividirse a su vez en capítulos.
Sugerencia 2: Edite el disco grabado
La edición de discos es fácil. Esta unidad ofrece convenientes funciones de edición para discos
formateados en el modo DVD+VR.
Puede editar lo siguiente desde el menú del título o el menú de ajuste.
Borrado de títulos
Poniendo nombres en títulos
Seleccionando/borrando marcas de capítulos
Ocultando capítulos
Seleccionando imágenes para índices
Divisi
ón de un título (DVD+RW/DVD-RW solamente)
Poniendo un nombre en disco
Finalización de un disco
• Esto permitirá que un disco DVD+R/DVD-RW/DVD-R que se grabe en nuestra unidad pueda ser reproducido
en un reproductor DVD diferente. Un disco sin finalizar no se podrá reproducir en otro reproductor.
Después de finalizar un disco, no puede editar los contenidos en ese disco.
Los discos DVD+RW no requieren finalización, pero “Compatibilizar edic.” para reproducirse en otras
unidades después de ediciones. Puede editar el disco después de “Compatibilizar edic.” .
Paso 6: Grabe en
discos
DVD.
Paso 5: Eleccione
el canal
des eado.
Paso 7: Pare la
grabación.
I
Escrit de datos 90%
Track 1 Track 2 Track 3 Track 4 Track 5
Comience la
grabación
Pare la
grabación
Pare/Comience
Comience la
grabación
Pare la
grabación
Título 1 Título 2
Capítulo 1 Capítulo1Capítulo 2 Capítulo 3 Capítulo 2
1 SP (2Hr)
2
ENPTY TITLE
1:41:17
SP (2Hr)
NOV/21/06 11:00
AM
CH12 SP
NOV/21/06 0:20:44
Esta operación puede
demorar en completarse.
CH 12
79
EN
MEMO
1VMN21952 / E7A60UD ★★★★★
Printed in China
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or
workmanship as follows:
DURATION:
PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year
from the date of original retail purchase. Certain parts are excluded from this warranty.
LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from
the date of original retail purchase.
LIMITS AND EXCLUSIONS:
This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original
retail purchase will be required together with the product to obtain service under this warranty.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced,
missing or if service was attempted by an unauthorized service center. This limited warranty does not
apply to any product not purchased and used in the United States.
This product is produced for home use and this warranty only covers failures due to defects in material
or workmanship which occurs during normal use. It does not cover damage which occurs in shipment,
or failures which are caused by repairs, alterations or product not supplied by FUNAI CORP, or damage
which results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation,
improper maintenance, commercial use such as hotel, rental or office use of this product or damage which
results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT
REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR
MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR
ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED
BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU
OF ALL OTHER WARRANTIES, EX OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART
OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS
REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS
MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER. THIS WARRANTY IS ONLY VALID
WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD,
YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE
CONTACT FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT
WITHOUT PRIOR NOTICE.
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquires,
please contact us at:
FUNAI CORPORATION
Customer Service
Tel :1-800-605-8453
http://www.funai-corp.com
19900 Van Ness Avenue, Torrance, CA 90501
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Magnavox MWR10D6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Magnavox MWR10D6 in the language / languages: English as an attachment in your email.

The manual is 14,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info