494166
17
Zoom out
Zoom in
Previous page
1/19
Next page
17
EN
INFORMATION
2 Select “INITIALIZE”.1 Press [SETUP]. 3
Select the desired PLAYER
MENU Language, using
[the Number buttons].
Troubleshooting Guide
If the unit does not perform properly when operated as instructed in this owner’s manual, refer to the following.
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this owner’s manual for
more details on correct operations.
• Playback from a desired track and random playback are not available during programmed playback.
• Some functions are prohibited on some discs.
INFORMATION
Note:
When you do not
wish to initialize,
press [SETUP] to
exit the menu at
step 2.
<SETUP MENU>
Press
twice.
SETUP
STOP
ENTERENTER
Problem Corrective action
No power
Check if the AC power cord is properly connected.
Unplug the outlet once, and wait for 5-10 seconds and then plug it in again.
No sound or picture
Check if the TV is switched on.
Check the video connection.
Check the audio/video cable connections to the TV. (Refer to page 6.)
Distorted picture
Sometimes a small amount of picture distortion may appear. This is not a malfunction.
Connect the unit directly to the TV.
Set “PROGRESSIVE” correctly in “DISPLAY” menu. Turn it on only if your TV has progressive scan and
you are using the component video connections between the unit and the TV. Disable progressive
scan for all other connections. (Refer to page 6.)
Completely distorted picture or
black/white picture with DVD
Connect this unit directly to the TV.
Make sure the disc is compatible with the unit.
No sound or distorted sound
Adjust the volume.
Check that the speakers are connected correctly.
No audio at digital output
Check the digital connections.
Check if the audio format of the selected audio language matches your receiver capabilities.
No DTS audio is output. This unit does not support DTS audio. This is not a malfunction.
Picture freezes momentarily during playback.
Check the disc for fingerprints/dirty and clean with a soft cloth wiping from center to edge.
Disc cannot be played back.
Clean the disc.
Ensure the disc is inserted in correct direction.
Check if the disc is defective by trying another disc.
Cancel the parental lock or change the control level.
Insert a correct disc that plays back on this unit.
Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its surface.
No return to start-up screen when disc is removed.
Reset the unit by switching off the unit, then on again.
The unit does not respond to
the remote control.
Aim the remote control directly at the sensor on the front panel.
Reduce the distance to the unit.
Replace the batteries in the remote control.
Re-insert the batteries with their polarities (+/– signs) as indicated.
Tune your radio to an empty AM station so that you hear a lot of noises. Then, turn up the volume. If you hear
some signal sound from the radio by pressing buttons on the remote control, the remote control is working.
Press and hold any button on remote control toward a digital camera. The remote control is working if
you confirm infrared light through the digital camera.
Buttons do not work or the unit stops responding.
To completely reset the unit, unplug the AC cord from the AC outlet for 5-10 seconds.
The unit does not respond to some
operating commands during playback.
Operations may not be permitted by the disc. Refer to the instructions of the disc.
The unit cannot read CD / DVD. Use a commonly available cleaning CD / DVD to clean the lens before sending the unit for repair.
Angle does not switch.
The angle cannot be switched for DVD which do not contain multiple angles. In some cases multiple
angles are only recorded for specific scenes.
Playback does not start when the title is selected.
Check the “PARENTAL” setting.
The password for rating level has been forgotten.
Enter the default password “4737”, then your forgotten password will be cleared.
ENTER
INITIALIZE INITIALIZE
INITIALIZE YES
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ENGLISH
FRENCH
SPANISH
SELECT MENU LANGUAGE
1
2
3
F
Reset to the Default Setting (Except for PARENTAL Setting)
Specifications
Output signal format:
NTSC color
Power source:
120 V AC +/- 10 %, 60 Hz +/- 0.5 %
Power consumption:
7 W (standby : 0.9 W)
Operating temperature:
41°F (5 °C) to 104 °F (40 °C)
Dimensions:
W : 8.3 inches (210 mm)
H : 2.0 inches (50 mm)
D : 9.7 inches (245 mm)
Weight:
Approx 1.80 lbs. (0.80 kg)
Designs and specifications are subject to
change without notice.
If there is a discrepancy between languages,
the default language will be English.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Magnavox MDV2100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Magnavox MDV2100 in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info