494144
53
Zoom out
Zoom in
Previous page
1/68
Next page
EN
EN-53
Continued on next page.
14. TROUBLESHOOTING
Problem Tip
No power. Check the power cord, if it is properly connected.
T
ry another power outlet.
Unplug the power cord, and wait for about 5-10 seconds. Plug it back in and
attempt to power on the unit.
No sound or picture. Make sure both the TV and Blu-ray Disc™ player are turned on.
Confirm the connections to the TV are connected properly as shown in the
connection page.
Check whether the connected TV or other device supported HDCP. (This
unit will not output a video signal unless the other device supports HDCP.)
If the player is set on a high resolution output, that is not supported by the
TV, the picture may not appear. Press and hold [ÆÆPLAY] on the front panel
for 5 seconds to change back to default output.
No reaction to the remote control. Confirm that the player’s power cord is plugged into a power outlet.
Check the batteries, and make sure they are inserted properly by + or - symbols.
Aim the remote at the unit’s remote receiver. Then press any arrow key and
confirm the STANDBY/ON indicator dims and blinks when a remote button
is pushed. This confirms that unit is receiving the remote IR signal.
No audio / video signal on the
display device via HDMI cable.
If the unit is connected to a non certified HDMI device, the audio / video
signal will not output on that device.
Make sure the display device is on the correct input / video channel.
Perform the HDMI hotplug: Disconnecting the HDMI cable from the display
device, turn on both devices, and replug the HDMI cable back in.
Check with the TV manufacturer, if there are any software updates available
for the TV.
Check if the HDMI cable is a certified version.
No high-definition video signal on
the TV screen.
Does the disc contain high-definition video? High-definition video is not
available when the disc does not contain it.
Does the TV support high-definition video? High-definition video is not
available when the TV does not support it.
No audio signal from surround
system of the audio system.
Make sure the audio system is turned on.
Check the input mode on the audio system if it is on the correct channel.
Check if the surround system is compatible with either Bitstream or LPCM. If
not sure please check the user manual or contact the surround manufacturer.
Once confirmed check the setting in the step menu of the unit.
Increase the volume level of the surround system.
Distorted picture. Sometimes a small amount of picture distortion may appear. This is not a
malfunction.
Connect this unit directly to the TV. If the audio / video cables are connected
to a VCR, pictures may be distorted due to the VCR copyright protection
system.
Completely distorted picture or
black / white picture with Blu-ray
Disc™ / DVD.
Make sure the disc is compatible with this unit.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Magnavox MBP5220F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Magnavox MBP5220F in the language / languages: English as an attachment in your email.

The manual is 4,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info