494143
60
Zoom out
Zoom in
Previous page
1/68
Next page
EN-60
18. MAINTENANCE
Servicing
Please refer to relevant topics on “TROUBLESHOOTING” on page 53 before returning the product.
If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable
parts inside. Eject the disc (if possible), remove the SD Memory Card, place the unit into the standby mode,
unplug the power plug, and please contact: 1-800-605-8610 or visit : www.magnavox.com/support
Cleaning the Cabinet
Wipe the front panel and other exterior surfaces of the unit with a soft cloth.
Never use a solvent, thinner, benzene or alcohol to clean the unit. Do not spray insecticide liquid near the unit.
Such chemicals may discolor the surface or damage the unit.
Cleaning Discs
When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to outside. Do not wipe
in a circular motion.
Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents
or antistatic spray intended for analog records.
Cleaning the Disc Lens
If this unit still does not perform properly although you refer to the relevant sections and to
“TROUBLESHOOTING” in this owner’s manual, the laser optical pickup unit may be dirty. Consult your dealer or
an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.
Disc Handling
Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.
Always store the disc in its protective case when it is not used.
Note that discs with special shapes (heart-shaped discs, octagonal discs, etc.) cannot be played back on this unit.
Do not attempt to play such discs, as they may damage the unit.
IR Signal Check
If the remote control is not working properly, you can use the unit or a digital camera (including a cellular phone
with built-in camera) to see if it is sending out an infrared signal. See next.
Check if IR signal is received by unit
Turn on the unit to ensure the STANDBY/ON indicator is on. Press any button, except [STANDBY/ON .], on
the remote pointing it at the center of the unit. If the indicator dims and flickers then the IR remote’s signal is
being received by the unit. If no dim flickering light, then check IR signal from remote next.
With a digital camera (including built-in cell phone cameras):
Point a digital camera towards the remote control. Push any button on the remote control and look
through the digital camera. If the infrared light appears through the camera, the remote control is
working.
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Magnavox MBP5210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Magnavox MBP5210 in the language / languages: English as an attachment in your email.

The manual is 4,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info