494142

Magnavox MBP5130 Manual

42
Zoom out
Zoom in
Previous page
1/52
Next page
42
<Wireless Router>
In order to use a wireless network, you must set
up the connection to the wireless router.
You must set the wireless router to
infrastructure mode. Refer to page 13
for details.
Find wireless network
Search for wireless networks automatically and
select the wireless network name (SSID) from the
list.
1. In “Network Connection” menu, use [K/L] to
select “Network Selection”, then press [OK].
2. Use [K/L] to select “Wireless”, then press
[OK].
3. Use [K/L] to select “Wireless Router”, then
press [OK].
4. Use [K/L] to select “Find wireless network”,
then press [OK].
• This unit will start searching for wireless
networks automatically.
5. The list of wireless networks will be
displayed. Use [K/L] to select the
appropriate wireless network name (SSID),
then press [OK].
• This unit will start searching for the
authentication setting of the selected
wireless network automatically.
Others
Find wireless network
Page Down
AP1
AP2
AP3
AP4
AP5
AP6_Test
1/ 2
If the unit finds the authentication setting of the
selected wireless network, skip to step 7. If the unit
fails to find the authentication setting automatically,
proceed to step 6 to select it manually.
6. Use [K/L] to select the authentication
setting of the selected wireless network,
then press [OK].
Others
Find wireless network
WEP/WPA Authentication
None
WEP
WPA-PSK (TKIP)
WPA-PSK (AES)
WPA2-PSK (TKIP)
WPA2-PSK (AES)
• For a wireless network with authentication
setting, select the authentication setting,
according to the security type of the wireless
network.
• For a wireless network without authentication
setting, select “None”.
“None”:
Set the authentication setting to “None”.
“WEP”:
Set the authentication setting to “WEP”.
“WPA-PSK (TKIP)”:
Set the authentication setting to “WPA-PSK (TKIP)”.
“WPA-PSK (AES)”:
Set the authentication setting to “WPA-PSK (AES)”.
“WPA2-PSK (TKIP)”:
Set the authentication setting to “WPA2-PSK
(TKIP)”.
“WPA2-PSK (AES)”:
Set the authentication setting to “WPA2-PSK
(AES)”.
7. “WEP/ WPA Key” entry screen will appear.
Enter the WEP/WPA key of the selected
wireless network using cursor buttons,
number buttons and color key, then press
[YELLOW].
• Confirmation message will appear. Select “Yes”
to complete the settings.
Others
Is Setting OK?
SSID
WEP/WPA Authentication
WEP/WPA Key
API
WPA2-PSK(AES)
**************...
Wireless Router
No
Yes
8. Following screen will appear. Use [K/L]
to select “Yes”, then press [OK] to go to
“Advanced Settings”.
• For further operation, refer to “Advanced
Settings” on page 43.
Others
Find wireless network
No
Yes
Wireless router settings are incomplete.
Please use "Advanced Settings" to complete your setup.
9. Press [SETUP] to exit.
Note
• For a wireless network with authentication
setting, key icon appears to the right hand of
the wireless network name (SSID).
• Signal icon shows the strength of the signal.
• WEP/WPA key appears as asterisks on the
confirmation screen.
Manually enter your SSID
Set up the connection to the wireless router
manually by entering the wireless network name
(SSID).
1. Follow steps 1 to 3 in “Find wireless network”
on page 42.
E5S20UD_MBP5130_F7_OM_EN.indd 42E5S20UD_MBP5130_F7_OM_EN.indd 42 2010/10/01 12:00:062010/10/01 12:00:06
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Magnavox MBP5130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Magnavox MBP5130 in the language / languages: English as an attachment in your email.

The manual is 5,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info