494141
21
Zoom out
Zoom in
Previous page
1/48
Next page
21
To repeat the current track / file in the random
selection, press [REPEAT] repeatedly until
Track” appears during playback. To repeat
the entire random selection press [REPEAT]
repeatedly until
All” appears during
playback.
Playback from a desired track / file is not
available during random playback.
In stop mode, press [RETURN] to switch to the
program playback mode.
Rapid Playback
This function plays back approximately at 1.3
times the normal playback while keeping the
sound output. This function is available only on
discs recorded in the Dolby Digital format.
1. During playback, press [MODE] repeatedly
until the Rapid playback setting appears.
Off
2. Press [OK] or [s/B] to switch (1.3x), or “Off.
Off : Plays back in normal speed.
”: Plays back approximately at 1.3 times of
normal playback.
3. Press [B (play)] to return to normal
playback.
Note
Picture adjustment and audio language setting
cannot be changed during this function.
Virtual surround does not work during this
function.
This function may not work at some points on
a disc.
During this function, 2ch LPCM will be output
from HDMI OUT jack and DIGITAL OUT jack.
Adjusting the Picture
You can adjust the picture quality.
1. During playback, press [MODE] repeatedly
until
appears.
2. Use [K/L] to select your desired item, then
use [s/B] to adjust the setting.
Black Level
Noise Reduction
On
Off
e.g.) DVD-video
Black level
You can adjust the black level setting to make the
black parts of the pictures as bright as you prefer.
You can select “On or Off.
“On” :Makes the dark parts brighter.
“Off :Shows the original picture as recorded.
Noise reduction (DVD-video only)
Reduces the noise of the playback picture.
Off :Shows the original picture as recorded.
“1” : Executes 3D noise reduction which detects
and deletes the noise by comparing each
picture frames.
“2” : Executes MPEG noise reduction which
reduces the block noise and mosquito
noise on the subtitle on movie.
“3” : Executes both MPEG noise reduction and
3D noise reduction.
3. Press [RETURN] to exit.
Note
The setting will remain the same even if the unit
is turned to the standby mode.
“Black Level” is not effective under the following
conditions.
- When the picture is output from HDMI OUT
jack.
You cannot adjust the setting during rapid
playback.
Virtual Surround
You can enjoy stereophonic virtual space through
your existing 2 channel stereo system.
1. During playback, press [MODE].
2. Use [K/L] to select your desired setting.
Off
“Off :No surround effect
“1” :Natural surround effect
“2” :Stronger surround effect
3. Press [RETURN] to exit.
Note
Set the virtual surround setting to “Off or lower
the volume if the sound is distorted.
Virtual surround does not function during rapid
playback.
For the virtual surround, audio signal will always
be 2-channel LPCM.
E5S02_03UD_MBP5120F_F7_OM_EN.indd 21E5S02_03UD_MBP5120F_F7_OM_EN.indd 21 2010/08/25 10:49:282010/08/25 10:49:28
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Magnavox MBP5120F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Magnavox MBP5120F in the language / languages: English as an attachment in your email.

The manual is 4,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info