494205
20
Zoom out
Zoom in
Previous page
1/37
Next page
English
20
When the scanning and memorizing are completed, the lowest
memorized channel will be displayed.
Autoprogram
Pleasewaitwhilethesystemisscanningforchannels.
Autoprogrammingmaytakemorethan20minutesto
complete.
75%
Digital channels
10 ch
Analog channels
6ch
Exit
Note
After setting Autoprogram, using CH+/−skips unavailable programs automatically.
If you are not receiving a signal from your cable service, contact the Cable provider.
If you press or MENU during autoprogram, the setup of TV channels will be
canceled.
Even if Autoprogram is completed, the channel setting will be lost if the AC power
cord is unplugged before the unit goes into Standby mode by pressing
.
The PIN Code will be required once you set a PIN code in the Childandratingslock.
p.22
If you want to change your PIN code, follow the instruction of ChangePIN.
p.24
Channellist
The channels selected here can be skipped when selecting the channels
using CH+/.
Those channels can still be selected with theNUMBERbuttons.
1 Use ▲▼ to select Channellist, then press OK.
2 Use ▲▼ to select the channel you want to remove, then press
OK.
Picture DTV 11.1
Sound
Highlightchannelsfor
ChUp/Downkeyselection.
DTV 11.2
Setup
DTV 11.3
Features
Language
USB
ChSelect Watch/Skip Back
The channel display for the removed channel darkens. You will
not be able to select the channel again using CH+/.
To reactivate a removed channel, use ▲▼ and press OK. The
registered channels are highlighted.
When you remove a main channel, its subchannels are removed
as well.
Note
The channel with DTV indicated on the display is ATSC. Otherwise the channel is
Analog TV.
Addchannels
This function lets you add the off the air Analog TV or Analog Cable
channels that were not added by the autoprogram due to reception
conditions during the initial setting.
1 Use ▲▼ to select Addchannels, then press OK.
2 Use theNUMBERbuttons to enter the number of the channel you
want to add, then press OK.
Picture Add channels
Sound
Foranalogchannels,selecta
channeltobeaddedusing
numberkeys.
Fordigitalchannels,youmust
performAutoprogramfunction.
Setup
Features
Language
USB
ChChange Back
Note
If setup completes successfully, Addedtothechannellist. is displayed.
If external Input is used, it is not possible to register the channel and Unavailable will be
displayed on the TV screen.
Some channels cannot be selected by CH+/. Use theNUMBERbuttons to select
the memorised channels.
Antennaconrmation
DigitalTVoperation
This function lets you check the Digital signal strength of each channel.
1 Use ▲▼ to select Antenna, then press OK.
2 Use theNUMBERbuttons or CH+/−to select the channel for
which you want to check the Digital signal strength.
Picture Back
Sound
Setup
Current 50
Max 50
Features
Language
USB

ChChange
Note
If the channel is set to Analog channel or external Input, you cannot conrm the
antenna condition.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Magnavox 39ME412V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Magnavox 39ME412V in the language / languages: English as an attachment in your email.

The manual is 7,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info