494148
29
Zoom out
Zoom in
Previous page
1/55
Next page
English
29
Preferences
You can set the unit to reduce the power consumption or adjust the
backlight brightness in Location setting.
fun-Link allows you to operate your connected fun-Link device.
Settingyourlocationtohome
Choosing Home gives you full exibility to change predened settings
for picture and sound.
1 Use ▲▼ to select Preferences, then press OK.
2 Use ▲▼ to select Location, then press OK.
Language Location Retail store
Channels
fun-Link (HDMI CEC) Home
Preferences
Network
Reset AV settings
3 Use ▲▼ to select Home, then press OK.
Retailstore
The unit will be set up with predened settings for
retail displays. In this setting, the power consumption
may possibly exceed the limit requirement of the
ENERGY STAR
®
qualication.
Home
This setting is ENERGY STAR
®
qualied.
The unit is set to maximize the energy efciency
for home setting and it can be adjusted through a
choice of picture and sound quality according to your
preference.
Note
You must set Home. Otherwise, personalized picture and sound settings will not be
memorized after the unit goes into Standby mode.
If you select Home, E-sticker will not be displayed.
E-sticker
When you set Locationto Retailstore, E-sticker (Electronic Sticker) is
displayed. E-sticker can be Turned Off using procedure below.
1 Use ▲▼ to select Preferences, then press OK.
2 Use ▲▼ to select E-sticker, then press OK.
3 Use ▲▼
to select Off, then press OK.
UseMagnavoxfun-Link
Your TV supports Magnavox fun-Link, which enables one-touch play
and one-touch Standby between fun-Link-compliant devices. Compliant
devices must be connected via an HDMI connector.
One-touchplay
When you connect your TV to devices that support one-touch play,
you can control your TV and the devices with one remote control. For
example, when you press ►(play) on your DVD remote control, your
TV automatically switches to the correct channel to show the DVD
content.
One-touchStandby
When you connect your TV to devices that support Standby, you can
use your TV remote control to put your TV and all connected HDMI
devices in Standby mode. You can perform one-touch Standby using the
remote control from any of the connected HDMI devices.
Systemaudiocontrol
When you connect your TV to HDMI CEC compliant devices, your
TV can switch automatically to play audio from the connected device.
To use one-touch audio, you must map the audio input from the
connected device to your TV. You can use the remote control from the
connected device to adjust the volume.
HDMI-ARC(AudioReturnChannel)
HDMI-ARC allows you to use Magnavox fun-Link to output TV audio
directly to a connected Audio device, without the need for an additional
Digital Audio cable. Be sure that the device is HDMI CEC and ARC
compliant, and that the TV is connected to the device using an HDMI
cable attached to both HDMI-ARC connectors.
Note
Magnavox does not guarantee 100% interoperability with all HDMI CEC devices.
The fun-Link-compliant device must be Switched On and selected as the source.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Magnavox 26MV402X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Magnavox 26MV402X in the language / languages: English as an attachment in your email.

The manual is 8,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info