494167
11
Zoom out
Zoom in
Previous page
1/33
Next page
These operations are accessible by remote control.
Some may also be accessible by controls on the main unit.
Initial Setup
Thissectionwillguideyouthroughtheunit’sinitialsetting
whichincludesselectingalanguageforyouron-screenmenu
andautoprogram,whichautomaticallyscansandmemorizes
viewablechannels.
Before you begin:
Makesuretheunitisconnectedtoantennaorcable.
1 Aftermakingallthenecessaryconnections,
press
toturnontheunit.
• Itmaytakeafewmomentstoturnontheunitforthe
firsttime.
• [Initial Setup]menuappearsautomaticallyafterthe
unitisturnedon.
2 Use▲/▼toselecttheon-screenlanguagefromthe
choices(English/Español/Français)ontherightsideofthe
TVscreen,thenpressOK.
3 Use▲/▼toselect[Antenna]forTVchannelsor[Cable]
forCATVchannels,thenpressOK.
Initial Setup
Make sure the antenna is connected to ''ANT. IN'' jack.
Select your signal source.
Antenna
Cable
Skip
Antenna
Cable
Or
ANT.IN
Select
OK
OK
Back
MENU
Skip
• [Autoprogram]willbegin.
Initial Setup
Please wait while the system is scanning for channels.
Auto programming may take more than 20 minutes to
complete.
0%
Digital channels
0 ch
Analog channels
0 ch
Skip
4 Use◄/►toselectthedesiredlocationsetting,thenpress
OK.
Initial Setup
Select “Retail” or “Home” for your location.
Retail
Home
Select
OK
OK
• Select[Retail]store,theunitwillbesetupwith
predefinedsettingforretaildisplays.
• Select[Home],theunitissettomaximizetheenergy
efficiencyforhomesettinganditcanbeadjusted
throughachoiceofpictureandsoundqualityaccording
toyourpreference.Usethissettingtoremovethe
E-Stickerifvisiblefromthedisplay.
p. 23
• Whentheinitialsetupiscompleted,thelowest
memorizedchannelwiththeconfirmationmessageof
thelocationsettingwillbedisplayedontheTVscreen.
• Youmustset[Home]instep4.Otherwise,[Picture]
and[Sound]settingsyouadjustedwillnotbe
memorizedaftertheunitgoesintostandbymode.
Note
Ifyouarenotreceivingasignalfromyourcableservice,contact
theCableprovider.
Ifyoupress
orMENUduringautoprogram,thissetupofTV
channelswillbecanceled.
Theinitialautoprogramfunctioncanbeexecutedforeither
[Antenna]or[Cable]onlyonce.Whenyouchangethe
connection(Antenna/Cable),set[Autoprogram]again.
p. 17
Ifthereisnosignalinputfromtheantennaterminalandno
operationforseveralsecondsafteryouturnontheunit,helpful
hintsappears.FollowtheinstructionslistedontheTVscreen.
Initial Setup
No channel is registered.
Try Autoprogram again?
Verify that you have a cable connected to the “ANT. IN” jack
on the back of the TV, the channel installation process
searches this connection. If you are using a cable or satellite
box, please confirm the input which you have connected to the
box and press “SOURCE” key on the remote control to select
the appropriate source input.
Retry
Later
Select
OK
OK
MENU
Skip
After an initial setup is completed...
• Ifyouwanttoscanthechannelsautomaticallyagain.
[Autoprogram]
p. 17
• Youcanaddthedesiredcableandanalogchannels
unmemorizedbyautoprogram.
[Add Channels]
p. 18
• Ifyouwanttochangetoanotherlanguage.
[Language]
p. 23
• Ifyouwanttochangethelocationsetting.
[Location]
p. 23
11
INTRODUCTION PREPARATION
WATCHING TV
USING FUNCTIONS
USEFUL TIPS
CONNECTING DEVICES
INFORMATION
English
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Magnavox 26MF321B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Magnavox 26MF321B in the language / languages: English as an attachment in your email.

The manual is 10,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info