494209
19
Zoom out
Zoom in
Previous page
1/37
Next page
English
19
Sound
Before you begin:
You must set Home in Location.
p.26
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes into Standby mode.
1 Press MENU and use ▲▼ to select Sound, then press OK.
Picture Auto sound Standard
Sound Equalizer
Setup SRS TruSurround XT On
Features Auto volume leveling Off
Language TV speakers On
USB
Primary MTS
Stereo
2 Use ▲▼◄► to select the item you want to adjust, then press
OK.
Auto sound
to select the desired setting, then press OK.
(Personal, Standard, Vivid, Sports, Movie, Music and
News)
When you adjust the following settings (Equalizer,
SRS TruSurround XT and Auto volume leveling),
Personal will be set automatically.
Adjust the tonal quality for each frequency.
Equalizer
Cursor  Cursor 
to adjust the each level of tonal quality
Press BACK to go back to the previous menu.
This selects sound modes for more spatial or surround sound
reproduction.
SRSTruSurround XT
Off
to set SRS TruSurround XT
®
to Off
On
to set SRS TruSurround XT
®
to On
This function keeps a constant loudness differential between the TV
commercials and the programs.
Auto volume 
leveling
Off
to remove the auto volume leveling
On
to reduce volume differences between
the TV commercials and the programs
You can select the Audio Output from the unit’s speakers or not. If your
amplier is HDMI link function compatible and connected by an HDMI
cable to this unit, some sound operations such as volume up can be
changed by using this unit’s remote control. Make sure fun-Link control
is set to On.
p.25
TV speakers
On
to output sound from the unit’s
speakers
Off
not to output sound from the unit’s
speakers
CEC Link 
to control Audio Output from your
connected fun-Link Compliant Devices
with VOL + /  by using this unit's
remote control.
You can set the output mode as a default for the sound mode (Analog TV only).
This setting is not interlocked when you change the output mode by
pressing SAP. Refer to Switching audio mode.
p.14
Primary MTS 
Stereo
to output stereo-audio
Mono
to output mono-audio
SAP
to output second audio program
Setup
Before you begin:
Make sure the unit is connected to antenna or cable.
1 Press MENU and use ▲▼ to select Setup, then press OK.
Picture Autoprogram
Sound Channel list
Setup Add channels
Features
Antenna
Language
USB
2 Adjust the following items.
Autoprogram
Be sure the RF cable is correctly connected to this unit and you are
registered with your cable TV provider when you install Cable channels.
1 Use ▲▼ to select Autoprogram, then press OK.
If you run Autoprogram when you have locked channels, a
message appears asking to enter your PIN . Enter your PIN in
order to complete the installation. You need to set the channel
lock again after the installation.
2 Use ▲▼ to select an appropriate option, then press OK.
When Antenna is selected, the TV detects antenna signals.
It searches for DTV and Analog TV channels available in your
area.
When Cable is selected, the TV detects signals supplied by cable. It
searches for DTV, Analog TV and Cable channels available in your
area.
Picture
Autoprogram will rescan all channels.
Autoprogramming may take more than 20 
minutes to complete.
Select your signalsource.
Back
Sound Antenna
Setup
Cable
Features
Language
Antenna
Cable
Or
ANTENNA IN
USB
Continued on next page.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Magnavox 19ME402V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Magnavox 19ME402V in the language / languages: English as an attachment in your email.

The manual is 7,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info