494156
34
Zoom out
Zoom in
Previous page
1/37
Next page
34
EN
FAQ
Question Answer
My remote control does not
work.
What should I do?
Check the antenna or cable connection to the main unit.
Check the batteries of the remote control.
Check if there is an obstacle between the infrared sensor window and the remote
control.
Test the signal output. If OK, then possible infrared sensor trouble.
[IR Signal Check]
p. 35
Aim the remote control directly at the infrared sensor window on the front of the unit.
Reduce the distance to the unit.
Re-insert the batteries with their polarities (+/– signs) as indicated.
When there is an infrared-equipped device such as PC near this unit, it may interrupt
the remote control signal of this unit.
Move the infrared-equipped device away from this unit, change the angle of the infrared
sensor or turn off the infrared communication function.
How come the Initial setup
appears every time I turn on
this unit?
Connect the RF coaxial cable to the unit directly and run the initial setup.
Make sure to complete the channel scan before
the unit goes to the stand-by mode.
Why I cannot watch some RF
signal TV programs.
• Make sure [Autoprogram] has been completed.
p. 19
Autoprogram must be completed when you set up the unit for the À rst time or move it
to a location where previously unavailable channels are broadcast.
The selected channel may not be broadcasting.
• When [Autoprogram] is interrupted and not completed, some channels will not be
received. Make sure to complete.
p. 19
The selected channel cannot be viewed by the [Child Lock] setting.
p. 27
The unit requires some kind of antenna input. An indoor antenna
(VHF /UHF), an external antenna (VHF /UHF) or an RF coaxial cable from your wall
cable/satellite box needs to be plugged into the unit.
How come there is no image
from the connected external
devices?
Check if the right input mode is selected by pressing SOURCE or using CH +/– .
[Switching Each Input Mode]
p. 16
Check the antenna or cable connection to the unit.
When using the Component Video Connection check that the Green (Y), Blue (Pb/Cb)
and Red (Pr/Cr) connectors are connected to their corresponding colored jacks on the
unit.
Whenever I entered
channel number, it changes
automatically.
Many digital channels have alternate channel numbers.
The unit changes the numbers automatically to the ones signifying the broadcasting
station channel number.
These basic numbers used for previous analog broadcasts.
(e.g., input ch#30 auto change to ch#6.1)
Why are captions not displayed
entirely?
Or, captions are delayed behind
the dialogue.
Captions that are delayed a few seconds behind the actual dialogue are common for live
broadcasts. Most captioning production companies can display a dialogue to maximum
of 220 words per minute. If a dialogue exceeds that rate, selective editing is used to
insure that the captions remain up-to date with the current TV screen dialogue.
How can I set the clock ? There is no clock function on this unit.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Magnavox 19ME360B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Magnavox 19ME360B in the language / languages: English as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info