581692

Magnat Sounddeck 400 BTX Manual

11
Zoom out
Zoom in
Previous page
1/32
Next page
11
OPERATION
Sound deck controls (front) (Fig. 1):
(1) Sensor for remote control and LED status display: Please aim at this sensor when using the remote control. The operating
status is indicated by the colour of the LED:
• red:Standbymode
• green:analogueinputactive
• purple:opticaldigitalinputactive
• turquoise:coaxialdigitalinputactive
• blue:Bluetoothinputactive,connectedtothesourcedevice
• blue,flashingquickly:Bluetoothinputactive,deviceinpairingmode
• flashingslowly:Mutemodeactive,deviceismuted
Sound deck controls (rear) (Fig. 2):
(2) Mains switch: After installation, use this switch to turn on the device. If the device is not going to be used for a prolonged
period, it should be switched off.
Operation with the system remote control (fig. 3):
(7) ON/STBY: Switches the device on when it is in the standby mode. If the LED (fig. 1 (1)) does not illuminate, actuate the power
switch ((fig. 2, (2)) located on the rear. Conversely the device can be switched from power operation to the standby mode.
(8) BT PAIR: Switches the device to the pairing mode when in Bluetooth operation to establish a connection to a Bluetooth
source device. The blue LED status indicator (Fig. 1, (1)) flashes quickly.
(9) COAX: Switches the device to the digital coaxial input. The turquoise LED status indicator (Fig. 1, (1)) illuminates.
(10) LINE: Switches the device to the analogue stereo input. The green LED status indicator (Fig. 1, (1)) illuminates.
(11) BLUETOOTH: Switches the device to the Bluetooth input. The blue LED status indicator (Fig. 1, (1)) flashes or illuminates (see
section System installation - Connecting to a Bluetooth audio source).
(12) OPT: Switches the device to the optical coaxial input. The purple LED status indicator (Fig. 1, (1)) illuminates.
(13) VOLUME: Increases (+) or decreases (-) the volume.
(14) EQ RESET: Resets the current bass and treble settings (17, 18) to a neutral setting and deactivates the 3D surround sound
function (16)
(15) MUTE: Switches the sound on and off.
(16) SURR: Switches the 3D surround sound function on or off.
(17) TREBLE: Increases (+) or decreases (-) the volume of high frequencies for manual adjustment of the sound pattern.
(18) BASS: Increases (+) or decreases (-) the volume of low frequencies for manual adjustment of the sound pattern.
SERVICE AND TECHNICAL PROBLEMS
If you should encounter any technical problems, please contact your specialist dealer or Magnat Audio-Produkte GmbH,
Tel.: 02234807-0.
SPECIFICATIONS
Configuration: 3 ways
Output power RMS/Max.: 4 x 25/50 watts
Frequency range: 28 — 30000 Hz
Cross-over frequency: 130 Hz, 2300 Hz
Dimensions (WxHxD): 730 x 114 x 381 mm
Weight: 10.5 kg
SUBJECT TO TECHNICAL CHANGE
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Magnat Sounddeck 400 BTX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Magnat Sounddeck 400 BTX in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info