665042
12
Zoom out
Zoom in
Previous page
1/40
Next page
12
Please note:
-The device might not be compatible with all USB device
-Some MP3 or WMA data might not be suitable for playback
-Do not remove the USB device while the Sounddeck is accessing it
-Copyrighted data (DRM) is not supported
-Power rating at the USB port: 5V=/1A
Connecting the power supply to the sound deck:
Included in delivery is the most commonly used mains cable. The mains cable used in your country, however, may be different. If
the mains cable is not compatible with your power sockets or if you are in any doubt, please contact your Magnat dealer.
1. Insert the 2-pin mains cable into the socket (5) on the amplier of the sound deck. (g. 4)
2. Insert the mains cable into the socket. Make sure that you are using the mains plug that is compatible with the socket (refer to
the information above).
OPERATION
Sound deck controls (front) (Fig. 3)
(1) LED-status indication: This LED illuminates red when the device is in standby mode.
(2) LED Display: Various information is shown on the Display:
- Selected audio source
- Sound and menu settings
- Audio format: if a Dolby digital signal is decoded, DOLBY appears on the display briey.
In the event of incompatible audio formats, N/A appears on the display; there is no playback.
- When playing back content stored on a USB: title number, play time, repeat mode, random play setting, other playback
information where applicable.
When not used, the display turns itself o after 10 seconds.
(3) Sensor for remote control: Please aim at this sensor when using the remote control.
Sound deck controls (rear) (Fig. 4):
(4) Mains switch: After installation, use this switch to turn on the device. If the device is not going to be used for a prolonged
period, it should be switched o.
Operation with the system remote control (fig. 5):
(11) ON/STBY: Switches the device on when it is in the standby mode. If the LED (g. 1 (1)) does not illuminate, actuate the power
switch ((g. 2, (5)) located on the rear. Conversely the device can be switched from power operation to the standby mode.
(12) SOURCE: Selects the audio input:
- HDMI/ARC (HDMI/ARC input)
- OPT (optical input)
- COAX (coaxial input)
- USB (USB input)
- BT (Bluetooth input)
- AUX (analog input)
(13) MUTE: Switches the sound on and o.
(14) VOLUME: Increases (+) or decreases (-) the volume.
(15) NIGHT: Activates or deactivates a playback mode with reduced dynamics and a frequency response that is adapted for
sound-sensitive situations (e.g. late at night).
(16) SURR: Switches the 3D surround sound function on or o.
(17) SOUND: Selects various sound settings:
LINEAR: Linear sound setting
MUSIC: Optimises the frequency response of the unit for music playback.
MOVIE: Optimises the frequency response of the unit for lm sound reproduction.
VOCAL: Emphasises the vocal range for particularly good speech intelligibility.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Magnat Sounddeck 150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Magnat Sounddeck 150 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info